Polar Electro A300 User manual

TECHNICAL SPECIFICATION
A300
Battery type 68 mAh Li-pol battery
Operating time Up to 26 days with 24/7 activity tracking and 1h/day
training
Water resistance 30 m
Materials Wristband: silicone, stainless steel;
Device: acrylonitrile butadiene styrene,
glass ber, polycarbonate, stainless steel,
polymethylmethacrylate
POLAR H7 HEART RATE SENSOR
Battery type CR2025
Battery sealing ring O-ring 20.0 x 0.90 Material Silicone
Water resistance 30 m
Connector material Acrylonitrile butadiene styrene
Strap material 38% Polyamide, 29% Polyurethane,
20% Elastane, 13% Polyester
Polar A300
GETTING STARTED GUIDE
Setup at ow.polar.com/start
English
To change the heart rate sensor battery:
Using a coin, open the battery cover by1.
turning it counterclockwise to OPEN.
Insert the battery (CR 2025) inside the cover2.
with the positive (+) side against the cover.
Make sure the sealing ring is in the groove to
ensure water resistance.
Press the cover back into the connector.3.
Use the coin to turn the cover clockwise to4.
CLOSE.
For safety reasons, please ensure you use the correct battery.
C
l
o
s
e
O
p
e
n
GymLink
WEAR THE HEART RATE SENSOR
Moisten the electrode area of the1.
strap.
Clip the strap around your chest2.
and adjust the strap to t snugly.
Attach the connector.3.
After training, detach the
connector and rinse the strap
under running water to keep it
clean.
PAIR THE HEART RATE SENSOR
Before your rst training session, you need to pair the heart rate
sensor with your A300. Wear your heart rate sensor, press START
and touch the sensor with your A300.
START AND STOP TRAINING
Press START and choose your sport*. Press START again when
you’re ready to go.
Press BACK to pause your training session.To continue training,
press START. To stop the session, press and hold BACK for three
seconds when paused until Recording ended is displayed.
* You can download more sports from the Flow web service.
TRAIN IT’S MUCH MORE
Your A300 guides you towards a more active and healthier life. But
together with Polar Flow web service and mobile app it helps you to
understand how your choices and habits aect your well-being.
POLAR H7 HEART RATE SENSOR*
Wear the comfortable heart rate sensor with your A300 and get more
out of your daily sports. The heart rate sensor detects your heart rate
also when swimming.
* If you bought your A300 without a heart rate sensor, not to worry, you
can buy one at any time.
POLAR FLOW WEB SERVICE
Follow your achievements, get guidance and see detailed analysis of
your activity and training results. Find all this and more at
polar.com/ow.
POLAR FLOW APP
View your activity and training data at a glance. The app syncs the
data wirelessly from your A300 to the Polar Flow web service. Get it
on the App StoreSM or Google PlayTM.
SMART NOTIFICATIONS
Get alerts about incoming calls, messages, calendar events and app
notications from your phone onto your A300. Pair your A300 with
Flow app. On your A300, set the smart notications on and dene the
notication settings for each app on your phone.
See support.polar.com/en/A300 for more details.
Manufactured by
Polar Electro Oy
Professorintie 5
FI-90440 KEMPELE
Tel [phone]
Fax [phone]
www.polar.com
Compatible with
FIND PRODUCT SUPPORT
facebook.com/
polarglobal
youtube.com/
polar
twitter.com/
polarglobal
instagram.com/
polarglobal
STAY TUNED WITH POLAR
support.polar.com/en/A300
App Store is a service mark of Apple Inc.
Google Play is a trademark of Google Inc.
17954515.02 ENG 04/2016 10011

AB
GET TO KNOW YOUR A300
USEFUL TIPS
Change the watch face by pressing and holding UP.»
Lock buttons by pressing and holding LIGHT.»
Sync data to the Polar Flow app by pressing and holding BACK.»
Bring your A300 close to your heart rate sensor to see the time of»
day during training.
WRISTBANDSET UP YOUR A300
Bend the wristband from the1.
buckle side to detach it from the
device.
Hold the wristband from the2.
buckle side. Pass the wristband
over the buttons rst from one
side and then from the other
side. Stretch the wristband only
when necessary.
Pull the device from the3.
wristband.
To attach the wristband, perform
the steps in the reverse order.
1.
TRACK YOUR ACTIVITY
As soon as you’ve set up your A300, it automatically starts to
track your activity 24/7.
You’ll get a personal daily activity goal, and be
able to track your progress towards the goal
by lling up the activity bar. View the activity
bar easily in time view.
In Activity menu you can see in more detail how active your day
has been so far and get guidance on how to reach your goal.
You can view your activity data in detail on Flow app or
Flow web service. There you can get details about your
physical activity and the health benets that come with it.
The USB connector of your A300 is in the device inside the wristband.
You need to detach the wristband for setting up your A300 with a
computer, charging the battery and changing the wristband.
The A300 counts the steps you have taken and tells the
distance covered.
It shows calories you have burned.
Wear it while you sleep and it detects your sleep time and
quality. Check the sleep info from the Flow app or Flow web
service.
It is your personal motivator reminding you to move when
you’ve been still for too long.
You can download the full-length user manual and the latest version
of this guide at support.polar.com/en/A300. There you can also nd
some great video tutorials to check out.
LEARN MORE ABOUT YOUR A300
Browse through the menu by pressing UP or DOWN.»
Conrm selections with START.»
Return, pause and stop with BACK.»
3.
2.
Please do the setup in the Polar Flow web service as follows:
Go to1. ow.polar.com/start and install the FlowSync software.
Detach the wristband as described in chapter2. Wristband.
Plug your A300 into your computer either directly (A) or with the3.
USB cable (B) for setup and charging the battery.
Then we’ll walk you through signing up for the Polar Flow web4.
service and personalizing your A300.
To get the most accurate and personalized activity and training
data, it’s important that you’re precise with the physical settings
when signing up for the web service. When signing up, you can
select a language and get the latest rmware for your A300.
After the setup is done, you’re ready to go. Have fun!
Your new A300 is in storage mode and it wakes up when you plug it into a computer for setup. If the battery is completely empty, it may take a
few minutes for your A300 to wake up.