PolyJohn E SaniStand PSD1-1000 User manual

PSD1-1000 - Soap/Hand Sanitizer Dispenser
April 2020
Page 1 of 4
PSD1-1000 - Soap/Hand Sanitizer Dispenser
April 2020
Page 2 of 4
PSD1-1000
Hand Sanitizer/
Soap Dispenser
POLYJOHN
USA
PolyJohn Enterprises Corp
2500 Gaspar Ave.
Whiting, IN 46394
Phone: [phone]
Fax: [phone]
www.polyjohn.com
[email protected]
POLYJOHN
WORLDWIDE
PolyJohn (UK) Ltd.
Equinox 1 Audby Lane
Wetherby, England LS22 7RD
Phone: [phone]
Fax: [phone]
[email protected]
POLYJOHN
CANADA
PolyJohn Canada
P.O. Box 2300
199 Forest Plain Rd.
Orillia, Ontario LV3 6S2
Phone: [phone]
Fax: [phone]
[email protected]
We recommend reading through the entire information booklet prior to proceeding with
installation, service and maintenance. All references to left and right throughout the booklet
are as viewed from the front of the restroom.
~~Tools Required~~
• Marker • Drill • 13/64” Drill Bit • Rivet Gun
Installation
Step 1. Remove the lid by turning
counterclockwise and lift up.
Step 2. Push the locking tab back and lift up
on the dispenser container.
Step 3. Holding the backing plate in the place
where you would like to mount the dispenser,
mark the placement for the three mounting
holes.
Step 4. Secure the backing plate in place using
the desired fasteners.
Step 5. Slide the liquid container back in place,
making sure the locking tab is in place, and ll
with desired soap or hand sanitizing solution. If the
dispenser is tted with a foaming pump, only foaming
soap/hand sanitizing solution may be used.
Step 6. Replace the lid and secure in place by
turning clockwise.
Full Size Scale Fasteners
(3) PC-000102 Rivet
1) Push In Tab
2) Lift Up Container
Maintenance and Care
•Use only mild cleaners with no abrasives
using a soft cloth to clean all surfaces.
•Some silicone grease should be applied
occasionally to the o-ring at the top of the
soap container to keep the lid from sticking.
Mineral oil should NEVER be used.
•If there is a chance for freezing, remove the
dispenser and drain the soap. Be sure to
remove the soap from the pump as well.
The PSD1-1000 PolyJohn hand sanitizer/soap dispenser is the rst dispenser
designed specically for the portable restroom
environment. These features include:
• A completely sealed container to
keep liquid from spilling when
transporting the restroom
• A lid that secures onto the container
after removing from the restroom
for spill-less storage
• Easy to clean, smooth surfaces
•Made for regular liquid soap/gel
type sanitizing solution
• One hand operation
• Clear container to see the level of
soap/sanitizer
General Overview (3) PC-000105 Rivet
(3) PC-000106 Washer
Capacity: 30oz / 887ml

PSD1-1000 - Soap/Hand Sanitizer Dispenser
April 2020
Page 3 of 4
PSD1-1000 - Soap/Hand Sanitizer Dispenser
April 2020
Page 4 of 4
For a source of cleaning, deodorizing and paper products contact:
PRO’S CHOICE
2500 GASPAR AVE.
WHITING, IN 463942175
8002921305
www.polyjohn.com/products/supplies/pros-choice.html
MISSION STATEMENT
“PolyJohn is a family owned, state of the art, plastics manufacturing company
dedicated to providing its employees with a work environment committed to
excellence, and its customers with innovative products, services and technology
that meet or exceed their requirements.”
THANK YOU FOR PURCHASING POLYJOHN PRODUCTS!
Look for us on the Web @ www.PolyJohn.com
We highly recommend membership in the Portable Sanitation Association International
(PSAI); the worldwide authority on portable sanitation services. The PSAI, “Portable
Sanitation Industry Certication Program” manual contains a wealth of information on
standards and service procedures. For more information contact the PSAI:
PORTABLE SANITATION ASSOCIATION INTERNATIONAL PSAI
7800 METRO PARKWAY, SUITE 104
BLOOMINGTON, MINNESOTA 55425 USA
8008223020 / 6128548300 FAX 6128547560
www.psai.org
PSD1-0003 - Lid
PC-000243 - O-Ring
FP1-0021 - Valve
PSD1-0002 - Soap Body
PSD1-0001 - Mounting Plate
PSD1-0012 - Check Valve
PSD1-0020 - Return Spring
PSD1-0010 - Pump Cup
PSD1-0030 - Check Ball
PSD1-0021 - Check Spring
PSD1-0011 - Pump Shaft
PSD1-0005 - Pump Retainer
PSD1-0004 - Pump Button
http://www.polyjohn.com/psd1-0003
http://www.polyjohn.com/fp1-0021
http://www.polyjohn.com/pc-000243
http://www.polyjohn.com/psd1-0002
http://www.polyjohn.com/psd1-0012
http://www.polyjohn.com/psd1-0020
http://www.polyjohn.com/psd1-0010
http://www.polyjohn.com/psd1-0001
http://www.polyjohn.com/psd1-0030
http://www.polyjohn.com/psd1-0021
http://www.polyjohn.com/psd1-0011
http://www.polyjohn.com/psd1-0005
http://www.polyjohn.com/psd1-0004
Exploded View Parts Diagram