Porta Phone The T1 User manual

Safety
1. To prevent possible hearing damage, do not listen at high volume levels for long periods.
Warranty
Porta Phone Co. items are warrantied against defects in material and/or
factory workmanship for a set period from the date of purchase. Standard
repairs due to misuse or wear and tear, as well as replacement parts
including but not limited to batteries, padding, USB cable, etc. are excluded.
Shipping to Porta Phone Co. is at customer’s expense, Porta Phone Co. will
pay for return ground shipping if the product warranty applies to the repair.
Call for details.
Shipping
Prior to returning your headset for warranty or service you must call Porta
Phone Co. for an RA (return authorization) number: 1.800.233.1113.
General Service
All repair work will be performed for the cost of replacement parts and
return shipping from the Porta Phone factory.
Service / Porta Phone Co.
145 Dean Knauss Drive
Narragansett, RI. 02882
www.portaphone.com
1.800.233.1113
The T1
Wireless Earbud Headsets

T1 Earbuds
with Wireless Pairing Headset Placement
To ensure proper fit place
Earbuds in ear as marked
(L=left & R=right).
Additional winged earmuffs
Included for smaller ears.
(To remove earmuffs, turn counter-
Clockwise 360º and pull. New
Earmuffs snap on.)
Adjust volume via Smart Touch Controls (C).
Long press “Right” earbud touch area = Volume UP
Long press “Left” earbud touch area = Volume DOWN.
T1 Earbud Instructions
A
C
B
D
ACharging Contacts
BLED Indicator
CSmart Touch Control –Volume button
DEar-hook –Ergonomic design for athletes
Charging
Place T1 into case with
adjustable rubber earbuds
rotated to the up or down
position (Note: Straight position
may cause insufficient contact).
Plug USB A-Type into
power source, micro
USB into charging box.
Red = Charging,
Green = Complete.
Charging time 1.5 hours
Supports up to 8 hours
of usage.
Pairing
1) The T1 will seek wireless pairing automatically when
removed from charging box.
2) LED flashing red & blue indicates search mode. Solid blue
LED indicates pairing is successful.
3) Once paired (even if turned off), the T1 will automatically
find the last connected device.
Power ON: Remove earbuds from charging box.
Power OFF: Place earbuds into charging box.