POSIFLEX LM-31XXE User manual

Package Contents
9.7” LM/TM-3X10E or 14” LM/TM-
3X14E or 15” LM/TM-3X15E
Standalone POS Monitor………….(x 1)
VGA Cable………………………..(x 1)
USB type A to B cable...……….....(x 1)
(For TM series monitors Only)
Power Adapter…………………….(x 1)
User Manual………………………(x 1)
Information CD
(for TM series monitors Only).…...(x 1)
Product Features
For LM-31XXE/33XXE models
LM-31XXE with slim bezel-free design; LM-33XXE with slim bezel-
type design
9.7” or 15” TFT LCD panel or 14” wide screen TFT LCD panel
VESA mounting support
For TM-31XXE/33XXE models
TM-31XXE with slim bezel-free design; TM-33XXE with slim design
9.7” or 15” TFT LCD panel or 14” wide screen TFT LCD panel
P-CAP touch panel for TM-31XXE; 5-wire resistive touch panel for
TM-3315E
VESA mounting support
Optional side attachment support for LM/TM-3X15E (SL-105)
Optional side attachment support for LM/TM-3114E (SL-104)
19600991010 Ver. Original
http://www.posiflex.com
LM/TM-31XXE/33XXE
Standalone POS Monitor
User Manual
1

Views of LM/TM-3X10E
Front View
Rear View
OSD Control Button
Neck Cover
Cable Exit
OSD button
EXT button
＋button
－button/ Power button
9.7” LM-3310E LCD Panel
9.7” LM-3110E LCD Panel
9.7” TM-3110E P-Cap Touch Panel
2

Bottom View
I/O Ports of LM-3X10E
I/O Ports of TM-3X10E
Rubber Pad
Rubber Pad
VGA Port
DC-IN Power Jack
Power LED Indicator
VGA Port
USB (Type B) Port
DC-IN Power Jack
Power LED Indicator
3

Views of the LM/TM-3114E
Front View
Rear View
Bottom View
Rubber Feet with Fixing Screw
Rubber Feet with Fixing Screw
Cable Holder
OSD Control Button
Side Mount Cover
Neck Cover
Cable Cover
Cable Exit
Gen 7L Base
14” LM-3114E LCD Panel
14” TM-3114E P-Cap Touch Panel
Cable Exit
OSD button
EXT button
＋button
－button/ Power button
4

I/O Ports
Views of the LM/TM-3115E/3315E
Front View
Rear View
OSD Control Button
Side Mount Cover
Neck Cover
Cable Cover
Cable Exit
15” LM-3315E LCD Panel
15” TM-3315E Resistive Touch Panel
Gen 7L Base
15” LM-3115E LCD Panel
15” TM-3115E P-Cap Touch Panel
LED indicator
LED indicator
OSD button
EXT button
＋button
－button/ Power button
VGA Port
USB (Type B) Port
DC-IN Power Jack
USB Port
Power LED Indicator
5

Bottom View
I/O Ports
Positioning your monitor for a Perfect Viewing Angle
9.7” LM/TM-3110E/ 3310E
With simpler and lighter design, the miniature standalone base for 9.7”
LM/TM-3110E/3310E makes it easy for you to set up the tilt angle. Please
refer to below suggestion to tilt your monitors:
To find the ideal viewing angle for 9.7”
LM/TM series monitors, please adjust the
monitor up or down in the direction indicated
by the arrow. Be careful NOT to touch the
panel while tilting the screen.
Rubber Feet with Fixing Screw
Rubber Feet with Fixing Screw
Cable Holder
VGA Port
USB (Type B) Port
DC-IN Power Jack
Cable Exit
USB Port
6

14” or 15” LM/TM-31XXE/33XXE
Different from the miniature base used by 10” LM/TM series monitors, the
adjustable Gen 7L base featuring its unique tilt adjustment mechanism allows
you to determine an ideal position for 14” and 15” LM/TM-31XXE/33XXE
series monitors. In general, it provides three standard positioning solution as
indicated in the below figures: Flat Folded mode, Low Profile mode, and Full
Extended mode.
14” or 15” LM/TM-31XXE/33XXE with Gen 7L Base
Flat Folded mode
Low Profile mode
Full Extended mode
LM/TM-31XXE/33XXE will be set up beforehand in Flat Folded mode
before being packaged into the box for shipping. After it is unpacked, you may
re-adjust the monitor in either Low Profile mode or Full Extended mode
according to your situation. The following describes the steps of adjusting Gen
7L base connected to the monitor among different positioning modes.
1. Unpack LM/TM-31XXE/33XXE, which is
supposed to be set in Flat Folded mode, out of
the package box and then lay your POS system
on a flat surface.
2. Steady the base stand with one hand, and then
tilt the screen downwards.
7

3. Position your monitor in Full Extended mode.
3.1 After grabbing the bottom edge of the screen with your hand,
gently move the screen upward until the screen is locked into place
with a click sound.
3.2 With the screen facing toward you, tilt the
screen up or down to your desired angle.
Please do not press on the LCD panel while
setting up the tilt angle.
4. Restore your monitor to Flat Folded mode from Full Extended
mode.
4.1 Tilt your screen in a horizontal position.
Then, remove the cable cover from the base
stand.
4.2 Support the screen with one hand holding onto its bottom edge.
While pulling the lever backwards, move the screen downwards
until the lever is lifted off the hook as shown in the figure
4.3 Push the cable cover back.
4.4 Tilt the screen again to the horizontal
position.
Hook
Lever
8

5. Position the monitor in Low Profile mode.
5.1 Follow Step 4 to set up the monitor in Flat
Folded mode.
5.2 Tilt the screen all the way down
5.3 To tilt screen up or down to your desired
angle, please be advised to keep the base
stand steady with one hand to do so. Do
NOT press on the LCD panel while setting
up the tilt angle.
Connecting VGA and USB Cables
The following section will provide the instructions on how to connect power
adapter, VGA and USB type A to B cables, and introduce helpful cable-
routing tips you may need to use while organizing cables.
For TM-31XXE/33XXE users, please note that USB type A to B cable needs
to be well attached to both of your monitor and terminal to allow touch screen
function to work normally.
1. Lay the monitor with its rear facing toward you and tilt the screen all
the way down.
9.7” LM/TM-3110E/3310E
14” or 15” LM/TM-31XXE/33XXE
9

2. Adjust the screen downwards, and release the cable cover from the
base.
For 9.7” LM/TM-3110E/3310E monitors,
please directly remove the neck cover from
the base.
If you are using 14” or 15” LM/TM-series monitors, refer to the
below figures to first remove cable cover and then neck cover in the
direction shown by the arrow.
3. After adjusting the screen to the horizontal position, take one end of
the VGA cable and have it passed through the cable exit.
9.7” LM/TM-3110E/3310E
14” or 15” LM/TM-31XXE/33XXE
4. Secure the VGA cable to the VGA port at the
bottom I/O plate of your monitor.
5. For TM series users, grab Type-B connector
of USB cable to route it through the cable,
and then insert it into Type-B USB port of
your monitor. If the monitor you are using
isn’t TM series, please skip this step.
Cable Exit
Cable Exit
10

6. If you intend to use Power adapter to supply
power to your monitor, thread the cable of
power adapter through cable exit, connect it
to DC-IN power connector of the monitor
and then another end to the electrical outlet.
7. Move the screen all the way down. Then, place back the cover into
place.
For 9.7” LM/TM-3110E/3310E users,
please place the neck cover back into place.
If you are using 14” or 15” LM/TM series monitors, first push
back the neck cover and then slide back the cable cover.
8. Properly attach VGA cable to your POS terminal. For TM series
users, please also insert Type-A connector of USB cable to the
terminal.
Installing an Magnetic Stripe Reader (Optional)
To expand functionality of your monitors, it allows you to additionally mount
an optional magnetic stripe reader (MSR), SL-104 for LM/TM-3114E models
or SL-105 for LM/TM-3X15E models. Before installing the peripheral device,
make sure that the monitor is properly powered off and is disconnected from
the external power source. For the detailed installation instructions of MSR,
please be advised to refer to the relevant user manual.
11

Identifying your Monitor as Secondary Touchscreen Monitor
in Extended Mode
Based on the type of your touch panels, you are required to adopt different
approaches to set up TM series as the extended monitor when you attempt to
extend the desktop across multiple monitors. In the following section the
related descriptions will be offered to help you achieve the purpose.
For TM-3315E Model with Resistive Touchscreen
For TM-3315E users, please follow the below instructions to complete
installation of The Dual Touch Manager, a tool designed to allow your monitor
to work as a secondary touchscreen monitor in extended mode.
1.
Make sure that the monitor is well connected to your POS terminal with
USB type A to B cable.
2.
Insert the Peripheral Information CD, which
is included in the package, into your CD-
ROM. Locate and double click the index
file.
3.
Click on Peripheral Drivers & Utilities.
4.
Click on TM/LM Series at the left side of
the menu.
5. Click on the Setup icon of USB Dual Touch Manager to install the
USB Dual Touch Manager.
6.
Follow the instructions to complete the manager installation. After the
installation is finished, restart your terminal.
12

For TM-31XXE Models with P-CAP Touchscreen
If your monitors are TM-31XXE models, you may configure the display
settings from Control Panel in Microsoft Windows to identify the monitor as
the secondary touchscreen monitor. Please go through the below steps to
complete configuration.
1.
Make sure that the monitor is well connected to your POS terminal
with USB type A to B cable.
2.
Go to
Control Panel>Display Settings
, change your display settings
to extended mode.
3.
Go to Control Panel, and then click on
Tablet PC Settings item.
4.
In Tablet PC Settings dialogue box,
click on Setup button.
5. Following the instruction shown on the screen, click on the screen
that you want to identify as the primary touchscreen display.
6. Press Enter button to proceed the configuration.
7.
Click on the screen you want to use as the secondary touchscreen
display.
13

Powering ON/OFF your Monitor
To start up LM/TM-31XXE/33XXE, you have to make sure that the monitor is
well connected to POS terminals and electricity is supplied to the monitor
either through POS terminal or through external power sources. For the users
who prefer Posiflex POS terminal as primary power sources to power your
monitor using VGA cable, please also refer to the Activating Power Output
to VGA Port via BIOS Settings section to confirm that VGA port of your
terminal is indeed enabled.
Power ON LM/TM-31XXE/33XXE
Press the power button of the terminal to power up the terminal. Few seconds
later the monitor will be initiated automatically.
Power OFF LM/TM-31XXE/33XXE
After following the standard shutdown procedure to shut down your terminal,
the monitor will be consequently turned off.
Activating Power Output to VGA port via BIOS Settings
In general, Posiflex terminals will disable the VGA controller in BIOS due to
safety concerns. In the case of using your terminal to supply power to monitors,
it is required to manually enable the VGA output of the terminals in BIOS
settings so that the monitor is able to extract power from the Posiflex terminals.
However, if the monitor you are using is not manufactured by Posiflex, it is
strongly suggested to deactivate the VGA port of your terminal in preventing
your device from being damaged.
The following will describe the steps required to enable VGA port in BIOS
setting. For those users who intend to power the monitors using power
adaptor included in your package, you may skip this section. Besides,
please DO NOT plug the VGA cable into VGA connectors while the terminal
is still running.
1. Make sure that LM/TM-31XXE/33XXE is well connected to the Posiflex
terminals using the VGA cable.
2. Press the power button of the POS to power on the POS. During the boot
process, hit F2 key to access BIOS setting.
3. Navigate through BIOS using arrow and Enter keys to access the setting
of VGA port. If it is set to be disabled, hit Enter key to enable the VGA
port.
4. Switch to Exit tab and select Exit Saving Changes option. Choose Yes in
Setup Confirmation message box to save your configurations.
5. After rebooting your POS, make sure the monitor is correctly detected.
14

Power LED Indicator
Power LED indicator, which is either located at the bottom of the screen or on
bottom I/O plate depending on your model type, is used to notify users of the
current status of your monitor by emitting various LED signals. Please refer to
the below chart to accurately interpret the of the indicators status to facilitate
your troubleshooting.
9.7” LM/TM-3X10E or 14” LM/TM-3114E
Status
Description
ON, solid green
System power ON
ON, solid orange
System Standby
OFF
System power OFF
15” LM/TM-3X15E
Status
Description
ON, solid blue
System power ON
ON, solid green
System Standby
OFF
System power OFF
Setting up Display Resolution for Your Monitor
The below chart defines the list of recommended display settings for
LM/TM-31XXE/33XXE. Improper display configuration will prevent the
monitor from properly displaying the image and lead to a warning message of
“out of range” prompted on the screen.
14” LM/TM-3114E
Display
Resolution
Horizontal Frequency
(KHz)
Refresh Rate (Hz)
640 x 480
31.47
60.00
800 x 600
37.88
60.32
1024 x 768
48.36
60.00
1280 x 720
45.00
60.00
1360 x 768
47.71
60.01
1366 x 768
47.71
59.79
15

9.7” LM/TM-3X10E or 15” LM/TM-3X15E
Display
Resolution
Horizontal Frequency
(KHz)
Refresh Rate (Hz)
640 x 400
37.9
70
640 x 480
31.5
60
37.9
72
37.5
75
720 x 400
37.9
70
800 x 600
35.1
56
37.9
60
48.1
72
46.9
75
1024 x 768
48.4
60
56.5
70
60
75
Using the OSD Menu
OSD, as known as On-Screen Display, is employed to assist users in adjusting
a variety of monitor-related settings depending on personal preference.
Through this section, it is expected to familiarize you with the options which
are accessible via OSD menu, and to optimize your experiences with
LM/TM-31XXE/33XXE.
Power & OSD Buttons
Power & OSD buttons are available on the rear,
right-hand side of the LCD monitor. Each of four
OSD controls works differently in various
occasions. Please refer to the below figure to get an
idea of how they could possibly function in relation
to OSD menu.
16

Icon
Description
OSD button
to activate the OSD menu
to select the specific menu option
EXT button
to exit from the current configuration
“＋” Button
to navigate through OSD menu options
to increase the value of the specific item
auto-adjustment feature
“－”Button/Power
Button
to navigate through OSD menu options
to decrease the value of the specific item

turn on/off the monitor
To help you get started with the OSD menu, the following points are
guidelines you are suggested to go through:
1. Firstly, press the OSD button to access the OSD menu.
2. Scroll through OSD menu options using either the “
＋
” or “
－
” button.
3. Press the OSD button to select the particular menu option of interest. It
will lead you to its sub-menu page if the selected menu option contains
sub-menu items.
4. Under the selected menu item with available sub-menu items, use the
“
＋
” or “
－
” button to switch among different items. Then, press the
OSD button to select the sub-menu item which you intend to adjust.
5. Use the “
＋
” or “
－
” button to adjust the value of the selected OSD item.
Then, press the OSD button to save settings.
6. Press the EXT button to exit from the current configuration.
17

OSD Options
Please refer to the following table for further explanation of the accessible
items.
OSD Menu Options
Sub-menu items & Description
Picture

Backlight
Press the “
＋
” button to increase backlight
intensity;
Press the “－” button to decrease backlight
intensity.
Brightness
Press the “
＋
” button to increase brightness;
Press the “－” button to decrease brightness.
Contrast
Press the “
＋
” button to increase contrast;
Press the “－” button to decrease contrast.
Sharpness
Press the “
＋
” button to increase sharpness;
Press the “
－
” button to decrease sharpness.
Display
Auto Adjustment
Execute the auto-tune function for OSD menu,
which will automatically perform fine tune of
the image quality for optimizing screen
performance.
H Position
Press the “
＋
” button to move the screen to the
right;
Press the “－” button to move the screen to the
left.
V Position
Press the “
＋
” button to move the screen up;
Press the “－” button to move the screen down.
Pixel Clock
Use the “
＋
” or “－” button to adjust the
Clock setting for VGA input.
Phase
Use the “
＋
” or “－” button to adjust the
Phase setting for VGA input.
18

OSD Menu Options
Sub-menu items & Description
Other
Reset
Restore the current menu back to the default
setting.
Menu Time
Specify the length of time for OSD menu to
stay active on the screen.
Language
Specify the language used in the OSD menu.
Information
Display information regarding display resolution,
horizontal/vertical sync frequency, pixel clock
(PCLK), etc.
19

Specifications
LM-31XXE/33XXE Models
LM-3110E
LM-3114E
LM-3115E
LM-3310E
LM-3315E
Display
LCD Panel
9.7" TFT
LCD
14" TFT
LCD
15" TFT
LCD
9.7" TFT
LCD
15" TFT
LCD
Resolution
(H) x (V)
1024 x
768
1366 x
768
1024 x 768
Contrast
Ratio
500 : 1
650 : 1
600 : 1
500 : 1
600 : 1
Brightness
270 cd/m2
200 cd/m2
250cd/m2
270 cd/m2
250cd/m2
Touch
Touch type
N/A
Interface
N/A
General Specification
Display
Interface
VGA
Power
Supply
12V / 18W
12V / 50W
12V / 18W
12V / 50W
TM-31XXE/33XXE Models
TM-3110E
TM-3114E
TM-3115E
TM-3315E
Display
LCD Panel
9.7" TFT LCD
14" TFT LCD
15" TFT LCD
Resolution
(H) x (V)
1024 x 768
1366 x 768
1024 x 768
Contrast
Ratio
500 : 1
650 : 1
600 : 1
Brightness
270 cd/m2
200 cd/m2
250cd/m2
Touch
Touch type
Bezel-free P-CAP touch panel
5-wire Resistive
touch panel
Interface
USB
General Specification
Display
Interface
VGA
Power
Supply
12V / 18W
12V / 50W
※
The product information and specifications are subject to change without
prior notice. To get the detailed information on LM/TM-31XXE/33XXE,
please check this model from Posiflex Global Website
(http://www.posiflex.com/en-global/Download/download).
20