POSIFLEX KS-7410 User manual

1
Package Contents
10” KS-7410 or 12” KS-7412 fanless touch
terminal (x 1)
Power adapter (x 1)
Power cord (x 1)
User manual (x 1)
16930900030 Ver. B0
http://www.posiflex.com
KS-7410/7412 Fanless Touch Terminal
User Manual

2
Views of KS-7410
Front View
Rear View
Left-side View
Cable Exit
3-Track Magnetic Stripe Reader
LED Indicator
Cable Cover
2nd Display
Mounting Holes
10” P-CAP
Touch Panel
Power Button
Base Stand

3
Views of KS-7412
Front View
Rear View
Left-side View
Cable Exit
12” Resistive Touch Panel
LED
Indicator
Cable Cover
2nd Display
Mounting Holes
Power Button
Base Stand
LED
Indicator
12” P-CAP Touch Panel

4
View of I/O Interface of KS-7410
View of I/O Interface of KS-7412
DC-In Power Jack
CR Port
LAN Port
VGA Port
COM Port (DB9)
COM Ports (RJ50)
USB 2.0 Ports
Line Out Jack
COM Ports (RJ50)
COM Port (DB9)
DC-In Power Jack
USB 2.0 Ports
LAN Port
VGA Port
Line Out Jack
COM Port
(DB9)
CR Port

5
Positioning your screen for a Perfect Viewing Angle
Tilt the screen in the direction shown by the arrow in the
figure. Please do not press on the LCD panel while
setting up the tilt angle.
Connecting VGA and USB Cables
The base stand of KS-7410/7412 features its own cable management to help
you well organize the cords. The following will provide some useful cable-
routing instructions for you to connect VGA and USB cables to KS-7410/7412.
1. Tilt the display all the way down.
2. To remove the cable cover at the rear of the
terminal, pull the four locking levers outwards
with your fingers and slide the cover in the
direction shown by the arrow.
3. Tilt the screen upwards, and then pass the
necessary cables through the cable exit.
4. Connect the connector of the power adapter to
the 12VDC-IN power jack.
5. After tilting the screen all the way down, push
back the cable cover. Please also make sure that
cables can be routed through the cable exit.
Cable exit

6
Installing Optional Upgrade Kits and Peripherals
KS-7410/7412 is an expandable model which allows you to upgrade its own
capacity by additionally installing multiple peripheral devices, such as
magnetic stripe reader (MSR), RFID reader, fingerprint reader, 2nd monitor and
cash drawer, according to your preference. The following will give you
installation instructions on how to expand on your current POS system with
these optional upgrade kits. Before proceeding with the installation of
peripherals, please make sure the POS system is completely shut down to
prevent damage.
Installing Side Mount Upgrade Kits
Located at left side on the back of the terminal, side mount compartment
is mainly used for installation of side-mounted equipment, including
magnetic stripe reader, RFID reader, and fingerprint reader. For detailed
installation instructions, please refer to the user manual specific to the
device which you intend to mount.
KS-7410
KS-7412
Installing Rear Top Mount Upgrade Kits
Rear top mount upgrade kits, including customer pole displays and 2nd
monitors, have to be mounted onto the top side on the rear of your POS
terminal as shown in the figure. As for the detailed installation
instructions, please be advised to read the user manual specific to the
device you intend to install.
KS-7410
KS-7412

7
Powering ON/OFF KS-7410/7412
Power ON KS-7410/7412
Press down the power button to power on the POS.
Power OFF KS-7410/7412
In most cases, press the power button of the POS to power the system
off. If the terminal fails to turn off the machine for unknown reasons,
please be advised to hold the power button more than 10 seconds to
force a shutdown of the system.
Status LED Indicator
LED status indicator, which is located at the bottom edge of the terminal, is
mainly responsible for notifying users of the current system status by emitting
various LED signals. In the chart provided below, it describes all the possible
LED status as a quick reference.
LED
Status
Description
POWER LED
Solid orange
System standby
Solid blue
System ON
Installing an Operating System
You are highly advised not to install an operating system on KS-7410/7412
without professional instructions. Not only might the careless handling during
installation cause irreversible damage to your machine, but also the improper
installation likely leads to system malfunction or failure. Please contact with
your dealers about the issues of operating system installation.
Performing System Recovery
For KS-7410/7412 models with preloaded operating systems, Recovery DVD
which includes useful utilities will be provided in the package to assist you in
efficiently restoring or repairing your damaged system. However, you are not
encouraged to recover your system without the help of system integrators.
Please be advised to contact your service center for further assistance with
system recovery.
Operation Environment
To prevent KS-7410/7412 from overheating, it is strongly suggested to
position your terminal in a well-ventilated working environment. In doing so,
please be advised to keep the POS terminal at least 25mm away from other
devices to ensure the machine is properly cooled down and functioning
normally.

8
Specifications
KS-7410
KS-7412
CPU
Intel Bay Trail J1900
System Memory
DDR3L SO-DIMM x 1
Storage Device
SATA Port x 1
Power Supply
12V / 60W
OS Support
Windows 7 / POSReady 7 / Windows 8.1 / Windows 10
LCD Display
9.7" TFT LCD
12" TFT LCD
LCD Resolution
1024 x 768
Touch Function
P-CAP
P-CAP or Resistive
Touch Controller
USB interface
Serial Port
3 ports, DB9 x 1 + RJ50 x
2
4 ports, DB9 x 2 + RJ50 x
2
Parallel Port
1 port, proprietary port connector inside service window
(Optional)
PS/2 Port
Pin header inside service window (Optional)
Standard USB Port
USB 2.0 x 6
LAN Port
10 / 100 / 1000 Mb x 1
VGA Port
VGA x 1
CR Port
1, controlling 2 CR via optional Y-cable
Audio
Internal 2W speaker x 1 + lineout jack
Environmental
Requirements
Operating:
0°C 〜40°C, 20%RH〜90%RH
Storage:
-20°C 〜70°C, 10%RH 〜90%RH
Attachment
KS-7410
Pole Display : PD-2604UE, PD -2605UE,
PD-309UE, PD-310UE, PD-76X4R
Programmable Keypad : KP-450
KS-7412
2nd Monitor : LM-2412, LM-2512E
Magnetic Stripe Reader : SA-104, SA-304