Potek BC0401 User manual
PRIOR TO USE, READ AND UNDERSTAND
PRODUCT SAFETY INFORMATION.
Failure to follow the instructions may result in ELECTRICAL
SHOCK, EXPLOSION, or FIRE, which may result in SERIOUS
INJURY, DEATH, DAMAGE TO DEVICE or PROPERTY.
Do not discard this information.
Smart Battery Charger
6/12V Car & Motorcycle
BC0401
IP65
CAUTION: Personal Safety
About BC0401
IMPORTANT SAFETY INFORMATION
INSTRUCTION MANUAL
RISK OF EXPLOSIVE GASES.
WARNING: Explosion and Fire Hazard
CHOOSE THE GROUND SYSTEM YOU WILL USE AND FOLLOW THE STEPS
CAUTION:
Charging Modes
Failure Display
Votage or Failure Code Display
B. CHARGING BATTERY INSTALLED IN VEHICLE
C. CHARGING BATTERY REMOVED FROM VEHCILE
LCD Display Manual
Note: Connect and disconnect the DC output clamps ONLY AFTER removing the AC plug from the
electrical outlet. Never alow the DC output clamps to touch each other. This may cause a spark.
* Keep pressing the Mode buon for more than 3 seconds, you can change between and .
.
a
a
a
e
e
e
CAUTION:
It is important to understand the differences and purpose of each charge mode and baery type.Do
not operate the charger unl you confirm the appropriate charge mode and baery type for your
baery.
6V
MALFUNCTIONS AND SOLUTIONS TECHNICAL SPECIFICATIONS
* Back current drain is the current that drains the baery if the charger is not connected to the mains.
Baery chargers has a very low back current.
.
Cause
CUSTOMER SERVICE
18-month limited warranty Lifetime technical support
@PotekSupport
@Potekelectronic
@Potek.fans
302-261-8788 (US)
Table of contents
Other Potek Batteries Charger manuals
