- 3 -
04. GOOD TO KNOW
• USB-C Port (Port 1) is for data transfer only.
• The computer will automatically install the driver at the first time when connecting to the Hub. Please wait for approximately five seconds to allow the installation to
complete automatically.
• To operate the product smoothly, please make sure that both the cables and adapter are completely plugged in when using the product.
• In order to enjoy the super speed of 5Gbps, your PC host and OS must fully support USB 3.0; otherwise it can only reach the speed of USB 2.0 standard.
• To prevent damage to the contents of the USB/memory/media card, please ensure you are following the correct procedure for removing storage from the operating system you are using.
• In a Windows® operating environment, when the USB/memory/media card is first connected, the Safely Remove Hardware icon will appear. Right-click on the icon, and
select Safely Remove Hardware. When the Safely Remove Hardware window appears, select USB Mass Storage Device, then click on Stop. This will, in turn, open the Stop
a Hardware Device window. Select the USB Mass Storage Device again, and click on OK, then wait for the operating system to notify you that it can now be safely removed.
• In a MAC OS operating environment, the added memory cards will appear on the desktop as disk drives. To safely remove the indicated drive(s), simply click and drag the
icon to the Trash.
Please read this manual before using the device to ensure safe and proper use. Images may differ in
appearance from the actual product. Content is subject to change without prior notice. Appearances
and specications are subject to change without prior notice. Failure to comply with safety warnings
and regulations can cause serious injury, property damage or death. This monitor stand securely
supports up to 9 kg (20 lbs). Do not place any monitors and devices heavier than the recommended
weight limit. Do not use the device for anything other than its intended use. Your device may mal-
function. Do not insert the device or supplied accessories into the eyes, ears, or mouth. Doing so
may cause suffocation or serious injuries. Do not bite or suck the device. Doing so may damage the
device or result in an explosion or re. Children or animals can choke on small parts. If children use
the device, make sure that they use the device properly. The device can be used in locations with an
ambient temperature of 0°C to 40°C. You can store the device at an ambient temperature of -10°C to
50°C. Using or storing the device outside of the recommended temperature ranges may damage to
the device or reduce the device lifespan. Do not use damaged power cords or plugs, or loose electrical
sockets. Unsecured connections can cause electric shock or re. Use manufacturer-supplied power
cable, data cable, and converter adapter. Using other cable and adapter may shorten the life of your
device or cause the device to malfunction. They may also cause a re or cause the devise to explode.
Protect the device from damage. Avoid exposing your device to very cold or very hot temperatures.
Extreme temperatures can damage the device and reduce the capacity and life of your device. Keep
your device dry. Humidity and liquids may damage the parts or electronic circuits in your device. Do
not turn on your device if it is wet. There may be some events such as wireless charging begins after
4-5 seconds even though your device is positioned on a charging area properly.
It is a normal situation that magnetic eld is transferring between a charging pad and a mobile de-
vice. Do not drop or cause an impact to the device. Handle and dispose of the device with care. Never
dispose of the device in a re. Never place the device on or in heating devices, such as microwave
ovens, stoves, or radiators. The device may explode when overheated. Follow all local regulations
when disposing of used device. Never crush or puncture the device. Do not disassemble, modify, or
repair your device. Any changes or modications to your device can void your manufacturer’s war-
ranty. If your device needs servicing, take your device to a Service Center. Do not use your device with
the back cover removed. Doing so may result in damage or malfunction. Do not drop your device or
cause impacts to your device. Your device may be damaged or may malfunction. If bent or deformed,
your device may be damaged or parts may malfunction. Do not touch the device, power cords, plugs,
or the electric socket with wet hands or other wet body parts. Doing so may cause electric shock. Do
not pull the power cord excessively when disconnecting it. Doing so may cause electric shock or re.
Do not bend or damage the power cord. Doing so may cause electric shock or re. Do not use your
device outdoor during a thunderstorm. Doing so may result in electric shock or device malfunction.
Please note that when removing USB/memory/media cards connected to the device, you are re-
quired to properly remove/eject the device from within the operating system (i.e. in Windows, use
the Safely Remove Hardware function). Failure to remove devices properly can result in lost data,
or permanent damage to the USB memory, Card Reader, or other devices. BROS&COMPANY INC.
highly recommends that you back up all data on your storage device before using the device. BRO-
S&COMPANY INC. is not responsible for any data lost due to data transfer, formatting, partitioning
or using a device. BROS&COMPANY INC. will not be held responsible for any damage to disk or hard
disk data caused by improper use.
05. WARNING / CAUTION / NOTICE
