Power Lift 11336B User manual

Assembly notes :
Fasteners provided to assemble machine:
(80) 3/8"X3/4" Flange Bolts
(4) 3/8"X4" Bolts
Tools required (Not Included):
- 9/16" Open-End Wrench
- 9/16" Socket
- Rubber Mallet
- 4 ft ladder (recomended)
Note: When assembling unit DO NOT
tighten any fasteners until specified.
Power Rack
A 6/6/19
POWER LIFT
REV.
PART NUMBER
R
11336B_assembly cover
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

31
2
21
Hardware Detail
Frame Detail
STEP 2
Item #21
3/8"X3/4"
STEP 1
Item #21
3/8"X3/4"
Instructions
1.) Assemble item 1 to item 3 using (4) 3/8"X3/4" flange bolts
provided. (Tighten bolts)
2.) Then assemble item 2 to item 1 using (4) 3/8"X3/4" flange bolts
provided. (Tighten bolts)
Note: When assembling unit DO NOT tighten any remaining fasteners
until specified.
A 6/6/19
Item No. Part Number Part Name Qty
1 39565A K BRACE 1
2 11502 RIGHT BASE 1
3 11501 LEFT BASE 1
Item No. Part Number Part Name Qty
21 99004 3/8"X3/4" FLANGE BOLT 8
ITEM NO. PART NUMBER DESCRIPTION
With spotters/QTY.
1 39565A
1
2 11502 1
3 11501 1
4 99062 DECAL, WARNING
1
5 99072 DECAL, POWER LIFT, U.S. PATENT
1
6 99417 PLUG, BLACK PLASTIC 5/16"
4
7 99004 BOLT, SFHHCS, .375-16X.75, ZINC
8
POWER LIFT
REV.
PART NUMBER
R
11336B_page1
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

A
7
4
5
6
2
3
STEP 4
Item #21
3/8"X3/4"
STEP 6
Item #21
3/8"X3/4"
STEP 5
Item #21
3/8"X3/4"
Instructions
3.) Assemble item 4 to item 2 using (4) 3/8"X3/4" flange bolts
provided. (NO LOWER BOLT HOLES ON INSIDE)
4.) Assemble item 7 to item 3 using (4) 3/8"X3/4" flange bolts
provided. (NO LOWER BOLT HOLES ON INSIDE)
5.) Assemble item 5 to item 3 using (4) 3/8"X3/4" flange bolts
provided. (LOWER BOLT HOLES ON INSIDE)
6.) Assemble item 6 to item 2 using (4) 3/8"X3/4" flange bolts
provided. (LOWER BOLT HOLES ON INSIDE)
Note: When assembling unit DO NOT tighten any fasteners
until specified.
LOWER
BOLT HOLES
NO LOWER
BOLT HOLES
STEP 3
Item #21
3/8"X3/4"
21
LOWER
BOLT HOLES
Hardware Detail
Frame Detail
A 6/6/19
Item No. Part Number Part Name Qty
2 11502 RIGHT BASE 1
3 11501 LEFT BASE 1
4 11357A RIGHT FRONT UPRIGHT 1
5 11874A LEFT REAR UPRIGHT 1
6 11875A RIGHT REAR UPRIGHT 1
7 11359A LEFT FRONT UPRIGHT 1
Item No. Part Number Part Name Qty
21 99004 3/8"X3/4" FLANGE BOLT 16
POWER LIFT
REV.
PART NUMBER
R
11336B_page2
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

A
5
22
1
23
6
Hardware Detail
STEP 7
Item #21
3/8"X3/4"
21
B
STEP 8
Item #21
3/8"X3/4"
Instructions
7.) Assemble item 22 to items 1 and 5 using (8) 3/8"X3/4" flange bolts
provided.
8.) Then assemble item 23 to item 1 and 6 using (8) 3/8"X3/4" flange bolts
provided.
Note: When assembling unit DO NOT tighten any fasteners until specified.
Frame Detail
A
6/6/19
Item No. Part Number Part Name Qty
1 39565A K BRACE 1
5 11874A LEFT REAR UPRIGHT 1
6 11875A RIGHT REAR UPRIGHT 1
22 40101 LEFT SPOTTER 1
23 40103 RIGHT SPOTTER 1
Item No. Part Number Part Name Qty
21 99004 3/8"X3/4" FLANGE BOLT 16
POWER LIFT
REV.
PART NUMBER
R
11336B_page3
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

Instructions
9.) Assemble item 8 onto item 5 and 7 using (8)
3/8"X3/4" bolts. ( A rubber mallet and ladder is
recommended to help line up bolt holes.)
10.) Then assemble the other item 8 onto item 4 and
6 using (8) 3/8"X3/4" bolts. ( A rubber mallet and
ladder is recommended to help line up bolt holes.)
Note: When assembling unit DO NOT tighten any
fasteners until specified.
7
4
6
5
88
STEP 10
Item #21
3/8"X3/4"
STEP 9
Item #21
3/8"X3/4"
21
Hardware Detail
Frame Detail
A 6/6/19
Item No. Part Number Part Name Qty
4 11357A RIGHT FRONT UPRIGHT 1
5 11874A LEFT REAR UPRIGHT 1
6 11875A RIGHT REAR UPRIGHT 1
7 11359A LEFT FRONT UPRIGHT 1
8 11520A TOP BRACE 2
Item No. Part Number Part Name Qty
21 99004 3/8"X3/4" FLANGE BOLT 16
POWER LIFT
REV.
PART NUMBER
R
11336B_page4
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

13
11
7
4
6
5
Instructions
11.) Assemble item 13 onto item 4 and 7 using (8)
3/8"X3/4" bolts. ( A ladder is recommended along
with a second pair of hands.)
12.) Then assemble item 11 onto item 5 and 6
using (8) 3/8"X3/4" bolts. ( A ladder is
recommended along with a second pair of hands.)
Note: When assembling unit DO NOT tighten any
fasteners until specified.
STEP 11
Item #21
3/8"X3/4"
STEP 12
Item #21
3/8"X3/4"
21
Hardware Detail
Frame Detail
A 6/6/19
Item No. Part Number Part Name Qty
4 11357A RIGHT FRONT UPRIGHT 1
5 11874A LEFT REAR UPRIGHT 1
6 11875A RIGHT REAR UPRIGHT 1
7 11359A LEFT FRONT UPRIGHT 1
11 11550A TOP CROSSBRACE 1
13 11595A FRONT CHIN BAR 1
Item No. Part Number Part Name Qty
21 99004 3/8"X3/4" FLANGE BOLT 16
POWER LIFT
REV.
PART NUMBER
R
11336B_page5
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

A
6
15
2
Frame Detail
Instructions
13.) Assemble item 15 to item 6 using (2) 3/8"X3/4"
bolts.
14.) Assemble item 15 to item 2 using (2) 3/8"X3/4"
bolts.
Note: When assembling unit DO NOT tighten any
fasteners until specified.
STEP 13
Item #21
3/8"X3/4"
B
STEP 14
Item #21
3/8"X3/4"
Hardware Detail
A 6/6/19
Item No. Part Number Part Name Qty
2 11502 RIGHT BASE 1
6 11875A RIGHT REAR UPRIGHT 1
15 11632A RIGHT WEIGHT STORAGE 1
Item No. Part Number Part Name Qty
21 99004 3/8"X3/4" FLANGE BOLT 4
POWER LIFT
REV.
PART NUMBER
R
11336B_page6
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

A
5
16
3
Instructions
15.) Assemble item 16 to item 5 using (2) 3/8"X3/4" bolts.
16.) Assemble item 16 to item 3 using (2) 3/8"X3/4" bolts.
17.) Now all bolts may be tightened starting from the bottom
to the top.
Frame Detail
STEP 15
Item #21
3/8"X3/4"
B
STEP 16
Item #21
3/8"X3/4"
Hardware Detail
A 6/6/19
Item No. Part Number Part Name Qty
3 11501 LEFT BASE 1
5 11874A LEFT REAR UPRIGHT 1
16 11631A LEFT WEIGHT STORAGE 1
Item No. Part Number Part Name Qty
21 99004 3/8"X3/4" FLANGE BOLT 4
POWER LIFT
REV.
PART NUMBER
R
11336B_page7
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

B
Instructions
18.) Assemble item 24 to item 15 and 16 using (4) 3/8"X4" bolts
provided. ( Make sure that the 3 hooks on item 24 face inside.)
16
15
2424
STEP 18
Item #25
3/8"X4"
25
26
26
27
Hardware Detail
Frame Detail
A 6/6/19
Item No. Part Number Part Name Qty
15 11632A RIGHT WEIGHT STORAGE 1
16 11631A LEFT WEIGHT STORAGE 1
24 32192 BAR STORAGE BRACKET 2
Item No. Part Number Part Name Qty
25 99549 3/8"X4" BOLT 4
26 99531 3/8" FLATWASHER 8
27 99540 3/8" NUT 4
POWER LIFT
REV.
PART NUMBER
R
11336B_page8
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

9
10
1212
Instructions
19.) Attach item 9 and 10 to the back uprights as shown.
20.) Attach items 12 to the side uprights as shown.
STEP 19
STEP 20
Frame Detail
A 6/6/19
Item No. Part Number Part Name Qty
9 11527A RIGHT BAR CATCH 1
10 11528A LEFT BAR CATCH 1
12 11585A SAFETY BAR 2
POWER LIFT
REV.
PART NUMBER
R
11336B_page9
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date