Power Lift 80745 Quick start guide

Assembly Notes :
Fasteners provided to assemble machine:
(24) 1/2"X3-1/2" BOLTS
(4) 1/2"X4-1/2" BOLTS
(2) 1/2"X4-3/4" BOLTS
(2) 1/2"X1-1/2" BOLTS
(2) 1/2"X4" BOLTS
(8) 3/8"X1-1/2" FLANGE BOLTS
Tools required (Not Included):
- 3/4" Open-End Wrench
- 3/4" Socket
- 9/16" Open-End Wrench
- 9/16" Socket
- 1/8" Allen Wrench
Note: When assembling unit DO NOT
tighten any fasteners until specified.
Plate Loaded Uni Lateral
Leg Press
A
8/13/19
POWER LIFT
REV.
PART NUMBER
R
80745_assembly cover
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

1
3
2
20
23
21
22
STEP 2
Item #20
1/2"X3-1/2"
STEP 1
Item #20
1/2"X3-1/2"
STEP 1
Item #20
1/2"X3-1/2"
Hardware Detail
Instructions
1.) Assemble item 2 to both items 1 using (4) 1/2"X3-1/2" bolts
provided.
2.) Assemble item 3 to both items 1 using (4) 1/2"X3-1/2" bolts
provided.
Note: When assembling unit DO NOT tighten any fasteners
until specified.
Frame Detail
A 8/13/19
Item No. Part Number Part Name Qty
1 81046 SIDE FRAME 2
2 81052 MIDDLE CROSS BRACE 1
3 81076 FRONT CROSS BRACE 1
Item No. Part Number Part Name Qty
20 99520 1/2"X3-1/2" BOLT 8
21 99585 1/2" FLATWASHER 8
22 99620 1/2"-13 NUT 8
23 80010 PLATE, SPACER 8
POWER LIFT
REV.
PART NUMBER
R
80745_page1
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

4
11
7
6
5
Instructions
3.) Assemble items 4 and 6 to item 1 using (4) 1/2"X3-1/2" bolts
provided. (An extra pair of hands may be needed.)
4.) Assemble items 4 and 6 to the other item 1 using (4) 1/2"X3-1/2"
bolts provided. (An extra pair of hands may be needed.)
5.) Assemble items 5, and 6 to item 1 using (2) 1/2"X3-1/2" bolts
provided.
6.) Assemble items 5, and 7 to the other item 1 using (2) 1/2"X3-1/2"
bolts provided.
Note: When assembling unit DO NOT tighten any fasteners until
specified.
STEP 4
Item #20
1/2"X3-1/2"
STEP 5
Item #20
1/2"X3-1/2"
STEP 3
Item #20
1/2"X3-1/2"
20
23
21
22
20
21
22
20
23
20
21
Hardware Detail
Frame Detail
A 8/13/19
Item No. Part Number Part Name Qty
1 81046 SIDE FRAME 2
4 80757 TOP FRAME 1
5 81052 BOTTOM CROSS BRACE 1
6 81092 RIGHT WEIGHT STORAGE 1
7 81086 LEFT WEIGHT STORAGE 1
Item No. Part Number Part Name Qty
20 99520 1/2"X3-1/2" BOLT 12
21 99585 1/2" FLATWASHER 14
22 99620 1/2"-13 NUT 12
23 80010 PLATE, SPACER 6
POWER LIFT
REV.
PART NUMBER
R
80745_page2
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

9
3
5
2
10
STEP 7
Item #24
1/2"X4-1/2"
STEP 8
Item #25
1/2"X4-3/4"
STEP 9
Item #24
1/2"X4-1/2"
24
21 21 22
A
STEP 9
Item #26
1/2"X1-1/2"
STEP 8
Item #25
1/2"X4-3/4"
26
21
21
22
25
21
21
22
A 8/13/19
Frame Detail
Hardware Detail
Instructions
7.) Assemble item 9 to item 5 using (2) 1/2"X4-1/2" bolts
provided.
8.) Assemble item 9 to item 3 using (2) 1/2"X4-3/4" bolts
provided.
9.) Assemble item 10 to both item 2 and 9 using (2) 1/2"X4-1/2"
bolts, and (2) 1/2"X1-1/2" bolts provided.
Note: When assembling unit DO NOT tighten any fasteners until
specified.
Item No. Part Number Part Name Qty
2 81052 MIDDLE CROSS BRACE 1
3 81076 FRONT CROSS BRACE 1
5 81052 BOTTOM CROSS BRACE 1
9 81078 SEAT FRAME 1
10 81095 SEAT CROSS BRACE 1
Item No. Part Number Part Name Qty
21 99585 1/2" FLATWASHER 16
22 99620 1/2"-13 NUT 8
24 99539 1/2"X4-1/2" BOLT 4
25 99827 1/2"X4-3/4" BOLT 2
26 99572 1/2"X1-1/2" BOLT 2
POWER LIFT
REV.
PART NUMBER
R
80745_page3
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

4
12
11
Instructions
10.) Make sure the bearings are on the inside and outside of items 11
and 12.
11.) Remove nuts from the top weight storage bolts. Insert item 11
and 12 workarms between items 1 and 4, one at a time. Assemble
items 11 and 12 to items 1 and 4 using (2) 1/2"X4" and (4) 1/2"x3-1/2"
bolts provided. (An extra pair of hands may be needed.)
12.) Tighten all bolts starting from the bottom and working toward the
top.
13.) Check that items 11 and 12 are aligned and move symetrically.
Hardware Detail
Frame Detail
20
22
22
27
STEP 11
Item #20
1/2"X3-1/2"
STEP 11
Item #27
1/2"X4"
12
11
8
STEP 10
A 8/13/19
Item No. Part Number Part Name Qty
4 80757 TOP FRAME 1
8 99773 BEARING 4
11 80753 RIGHT WORKARM 1
12 80746 LEFT WORKARM 1
Item No. Part Number Part Name Qty
20 99520 1/2"X3-1/2" BOLT 4
22 99620 1/2"-13 NUT 6
27 99521 1/2"X4" BOLT 2
POWER LIFT
REV.
PART NUMBER
R
80745_page4
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

13
14
9
1
15
Instructions
14.) Assemble item 13 to item 9 using (4) 3/8"X1-1/2" flange bolts
provided. (Tighten bolts, but DO NOT over tighten bolts into pad.)
15.) Assemble item 14 to item 9 using (4) 3/8"X1-1/2" flange bolts
provided. (Tighten bolts, but DO NOT over tighten bolts into pad.)
16.) Assemble item 15 to both of items 1 using (4) 1/2"X3-1/2" bolts
provided. (Tighten bolts)
17.) Make sure all bolts are tightened.
STEP 16
Item #20
1/2"X3-1/2"
STEP 14
Item #28
3/8"X1-1/2"
STEP 15
Item #28
3/8"X1-1/2"
28
20
23
21
22
Hardware Detail
Frame Detail
A 8/13/19
Item No. Part Number Part Name Qty
1 81046 SIDE FRAME 2
9 81078 SEAT FRAME 1
13 99772B BACK PAD 1
14 99771B SEAT PAD 1
15 71005 HANDLE 1
Item No. Part Number Part Name Qty
20 99520 1/2"X3-1/2" BOLT 4
21 99585 1/2" FLATWASHER 4
22 99620 1/2"-13 NUT 4
23 80010 PLATE, SPACER 4
28 99441 3/8"X1-1/2" FLANGE BOLT 8
POWER LIFT
REV.
PART NUMBER
R
80745_page5
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date