Power Lift 81274A Quick start guide

Plate Loaded Chest Press
Assembly notes :
Fasteners provided to assemble machine:
(16) 1/2"X3-1/4" BOLTS
(8) 1/2"X4" BOLTS
(2) 3/8"X3-3/4" BOLTS
(6) 3/8"X1-1/4" FLANGE BOLTS
Tools required (Not Included)
:
- 3/4" Open-End Wrench
- 3/4" Socket
- 9/16" Open-End Wrench
- 9/16" Socket
- 1/8" Allen Wrench
Note: When assembling unit DO NOT tighten
any fasteners until specified.
A 6/4/19
POWER LIFT
REV.
PART NUMBER
R
81274A_assembly cover
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

1
3
5
7
STEP 1
Item #17
1/2"X4"
STEP 3
Item #15
1/2"X3-1/2"
STEP 3
Item #15
1/2"X3-1/2"
STEP 2
Item #17
1/2"X4"
17
18
18
19
15
16
18
14
Hardware Detail
Instructions
1.) Assemble item 1 and item 3 together using (2) 1/2"X4" bolts
and (2) thin lock nuts provided.
2.) Then assemble item 7 to item 3 using (2) 1/2"X4" bolts and
(2) thin nuts provided.
3.) Attach item 5 to both item 1, and 7 using (4) 1/2"X3-1/2" bolts
provided.
Note: When assembling unit DO NOT tighten any fasteners until
specified.
?
Frame Detail
A 6/4/19
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 82318 1
2 82345 2
3 82319 1
4 82320 1
5 82348 2
6 82349 2
7 82350 2
8 82351 2
9 82325 2
10 82326 1
11 16071 PLATE, ENDCAP, 2X3 6
12 11007 PLATE, BASE PAD 4
13 11035 4
14 11036 6
15 82354 2
16 82328 1
17 82357 2
18 82353 2
19 82337 1
20 82338 4
21 82364 1
22 82344 1
23 82346 1
24 82347 1
25 82355 1
26 82356 1
27 99673 RUBBER COLLAR 10
28 99521 BOLT, HHCS, .5-13X4, GR5, ZINC 4
29 99585 1/2" SAE FLATWASHER 20
30 99571 1/2" -13 THIN NYLON LOCK NUT 8
31 99520 1/2" -13 X 3-1/2" HHCS ZINC GRD 5 4
32 99620 1/2" -13 NYLON INSERT L.N. 4
33 80010 PLATE, SPACER 4
34 99563 RUBBER FOOT PAD 2
35 99603 1/2"-13X3" HHCS ZINC 4
36 11041 UHMW, SHAFT COVER, 7-1/4" 6
37 11040 SHAFT COVER 4
Item No. Part Number Part Name Qty
1 82308 RIGHT SIDE FRAME 1
3 82310 BRACE 1
5 82312 TOP BRACE 1
7 82314 LEFT SIDE FRAME 1
Item No. Part Number Part Name Qty
14 99620 1/2"-13 NUT 4
15 99520 1/2"X 3-1/2" BOLT 4
16 80010 PLATE, SPACER 4
17 99521 1/2"X4" BOLT 4
18 99585 1/2" FLATWASHER 12
19 99571 1/2"-13 THIN NUT 4
POWER LIFT
REV.
PART NUMBER
R
81274A_page1
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

A
6
7
1
STEP 4
Item #15
1/2"X3-1/2"
Hardware Detail
15
16
18
14
Instructions
4.) Assemble item 6 to item 1, and 7 using (4)
1/2"X3-1/2" bolts provided.
Note: When assembling unit DO NOT tighten
any fasteners until specified.
Frame Detail
A 6/4/19
Item No. Part Number Part Name Qty
1 82308 RIGHT SIDE FRAME 1
6 82313 HIGH BRACE 1
7 82314 LEFT SIDE FRAME 1
Item No. Part Number Part Name Qty
14 99620 1/2"-13 NUT 4
15 99520 1/2"X3-1/2" BOLT 4
16 80010 PLATE, SPACER 4
18 99585 1/2" FLATWASHER 4
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 82308 1
2 82310 1
3 82312 1
4 82313 1
5 82314 1
6 99673 RUBBER COLLAR 10
7 99521 BOLT, HHCS, .5-13X4, GR5, ZINC 4
8 99585 1/2" SAE FLATWASHER 24
9 99571 1/2" -13 THIN NYLON LOCK NUT 8
10 99520 1/2" -13 X 3-1/2" HHCS ZINC GRD 5 8
11 99620 1/2" -13 NYLON INSERT L.N. 8
12 80010 PLATE, SPACER 8
13 99563 RUBBER FOOT PAD 2
14 99603 1/2"-13X3" HHCS ZINC 4
15 11041 UHMW, SHAFT COVER, 7-1/4" 6
16 11040 SHAFT COVER 4
POWER LIFT
REV.
PART NUMBER
R
81274A_page2
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

4
3
5
STEP 5
Item #17
1/2"X4"
STEP 6
Item #17
1/2"X4"
17
16
17
18
19
18
18
14
Hardware Detail
Instructions
5.) Assemble item 4 to item 5 using (2) 1/2"X4" bolts
provided with thicker lock nuts.
6.) Then attach item 4 to item 3 using (2) 1/2"X4"
bolts provided with thin lock nuts.
7.) Now tighten all bolts starting from the bottom
working toward the top.
Frame Detail
A 6/4/19
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 82308 1
2 82310 1
3 82311 1
4 82312 1
5 82313 1
6 82314 1
7 99673 RUBBER COLLAR 10
8 99521 BOLT, HHCS, .5-13X4, GR5, ZINC 8
9 99585 1/2" SAE FLATWASHER 32
10 99571 1/2" -13 THIN NYLON LOCK NUT 11
11 99520 1/2" -13 X 3-1/2" HHCS ZINC GRD 5 10
12 99620 1/2" -13 NYLON INSERT L.N. 11
13 80010 PLATE, SPACER 10
14 99563 RUBBER FOOT PAD 2
15 99603 1/2"-13X3" HHCS ZINC 4
16 80494 LABEL, SEAT ADJUST NUMBER 1
17 71102PL SHAFT, SEAT STOP 1
18 99779B SEAT RACK FRONT 1
19 99682 BOLT, FHSCS, .5-13X4, BL-OX 1
20 99778B SEAT RACK BACK 1
21 80096 WLDT, SEAT 1
22 99781B SEAT ROLLER 3
23 99010 3/8" -16 X 4-1/4" HHCS 3
24 99784 1
25 99782 6203-2RS BEARING 6
26 80099 WLDT, SEAT LEVER 1
27 99531 WASHER, FLAT, .375, USS 8
28 99540 NUT, .375-16, LOCK, NYLON INSERT 3
29 99530 3/8" LOCK WASHER 2
30 99502 ADJ. HANDLE GRIP (40005K24) 1
31 99783B SEAT ROLLER INSERT 6
32 11041 UHMW, SHAFT COVER, 7-1/4" 6
33 11040 SHAFT COVER 4
Item No. Part Number Part Name Qty
3 82310 BRACE 1
4 82311 SEAT FRAME 1
5 82312 TOP BRACE 1
Item No. Part Number Part Name Qty
14 99620 1/2"-13 NUT 2
16 80010 PLATE, SPACER 2
17 99521 1/2"X4"BOLT 4
18 99585 1/2" FLATWASHER 6
19 99571 1/2"-13, THIN NUT 2
POWER LIFT
REV.
PART NUMBER
R
81274A_page3
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

8
7
Frame Detail
Hardware Detail
1516
14
1313
8
STEP 8
Instructions
8.) Make sure items 13 is on each end of item 8.
9.) Attach item 8 to item 7 using (4) 1/2"X3-1/2"
bolts provided.
STEP 9
Item #15
1/2"X3-1/2"
A 6/4/19
Item No. Part Number Part Name Qty
7 82314 LEFT SIDE FRAME 1
8 82315 LEFT PUSH ARM 1
13 99773 BEARING, FOR 1 1/4" SHAFT 2
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 82308 1
2 82310 1
3 82311 1
4 82312 1
5 82313 1
6 82314 1
7 82315 1
8 99673 RUBBER COLLAR 10
9 99773
BEARING, 2 BOLT FLG. FOR 1 1/4"
SHAFT
2
10 99620 1/2" -13 NYLON INSERT L.N. 15
11 99520 1/2" -13 X 3-1/2" HHCS ZINC GRD 5 14
12 80010 PLATE, SPACER 14
13 99521 BOLT, HHCS, .5-13X4, GR5, ZINC 8
14 99585 1/2" SAE FLATWASHER 36
15 99571 1/2" -13 THIN NYLON LOCK NUT 13
16 99670 BRONZE, .75X1X.75, FLANGED, 841 2
17 60004PL BUSHING, .75X.12X4.09 2
18 82215 1
19 82216 1
20 82214 1
21 99594 1
22 99766 2
23 99563 RUBBER FOOT PAD 2
24 99603 1/2"-13X3" HHCS ZINC 4
25 80494 LABEL, SEAT ADJUST NUMBER 1
26 71102PL SHAFT, SEAT STOP 1
27 99779B SEAT RACK FRONT 1
28 99682 BOLT, FHSCS, .5-13X4, BL-OX 1
29 99778B SEAT RACK BACK 1
30 80096 WLDT, SEAT 1
31 99781B SEAT ROLLER 3
32 99010 3/8" -16 X 4-1/4" HHCS 3
33 99784 1
34 99782 6203-2RS BEARING 6
35 80099 WLDT, SEAT LEVER 1
36 99531 WASHER, FLAT, .375, USS 8
37 99540 NUT, .375-16, LOCK, NYLON INSERT 3
38 99530 3/8" LOCK WASHER 2
39 99502 ADJ. HANDLE GRIP (40005K24) 1
40 99783B SEAT ROLLER INSERT 6
41 11041 UHMW, SHAFT COVER, 7-1/4" 6
42 11040 SHAFT COVER 4
Item No. Part Number Part Name Qty
14 99620 1/2"-13 NUT 4
15 99520 1/2"X3-1/2" BOLT 4
16 80010 PLATE, SPACER 4
POWER LIFT
REV.
PART NUMBER
R
81274A_page4
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

STEP 11
Item #15
1/2"X3-1/2"
13
1
2
Instructions
10.) Make sure items 13 is on each end of item 2.
11.) Attach item 2 to item 1 using (4) 1/2"X3-1/2" bolts
provided.
12.) Tighten bolts on each arm while making sure
both arms are aligned and move symmetrically.
13.) Check that set screws on bearings (Item #13) are
tightened.
Frame Detail
Hardware Detail
15
16
14
A 6/4/19
Item No. Part Number Part Name Qty
1 82308 RIGHT SIDE FRAME 1
2 82309 RIGHT PRESS ARM 1
13 99773 BEARING, FOR 1 1/4" SHAFT 2
Item No. Part Number Part Name Qty
14 99620 1/2"-13 NUT 4
15 99520 1/2"X3-1/2" BOLT 4
16 80010 PLATE, SPACER 4
POWER LIFT
REV.
PART NUMBER
R
81274A_page5
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

Instructions
14.) Attach item 43 to item 35 using the (2)
3/8"X3-3/4" and (2) 3/8"X1-1/4" bolts provided.
Note: DO NOT over tighten fasteners into seat.
Frame Detail
Hardware Detail
43
35
STEP 14
Item #44
3/8"X3-3/4"
STEP 14
Item #60
3/8"X1-1/4"
44
41
60
A 6/4/19
Item No. Part Number Part Name Qty
35 80096 SEAT FRAME 1
43 80030 SEAT PAD 1
Item No. Part Number Part Name Qty
41 99531 3/8" FLATWASHER 2
44 99664 3/8"X3-3/4" BOLT 2
60 99954 3/8"X1-1/4" FLANGE BOLT 2
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 82308 1
2 82309 1
3 82310 1
4 82311 1
5 82312 1
6 82313 1
7 82314 1
8 82315 1
9 99673 RUBBER COLLAR 10
10 99773
BEARING, 2 BOLT FLG. FOR 1 1/4"
SHAFT
4
11 99620 1/2" -13 NYLON INSERT L.N. 19
12 99520 1/2" -13 X 3-1/2" HHCS ZINC GRD 5 18
13 80010 PLATE, SPACER 18
14 99521 BOLT, HHCS, .5-13X4, GR5, ZINC 8
15 99585 1/2" SAE FLATWASHER 40
16 99571 1/2" -13 THIN NYLON LOCK NUT 15
17 99670 BRONZE, .75X1X.75, FLANGED, 841 4
18 60004PL BUSHING, .75X.12X4.09 4
19 82215 2
20 82216 2
21 82214 2
22 99594 2
23 99766 4
24 99563 RUBBER FOOT PAD 2
25 99603 1/2"-13X3" HHCS ZINC 4
26 80494 LABEL, SEAT ADJUST NUMBER 1
27 99441 BOLT, SFHHCS, .375-16X1.5, ZINC 2
28 71102PL SHAFT, SEAT STOP 1
29 99779B SEAT RACK FRONT 1
30 99682 BOLT, FHSCS, .5-13X4, BL-OX 1
31 99778B SEAT RACK BACK 1
32 80096 WLDT, SEAT 1
33 99781B SEAT ROLLER 3
34 99010 3/8" -16 X 4-1/4" HHCS 3
35 99784 1
36 99782 6203-2RS BEARING 6
37 80099 WLDT, SEAT LEVER 1
38 99531 WASHER, FLAT, .375, USS 8
39 99540 NUT, .375-16, LOCK, NYLON INSERT 3
40 80030 ASSY, SEAT PAD 1
41 99664
BOLT, HHCS, .375-16X3-3/4", GR5,
ZINC
2
42 99530 3/8" LOCK WASHER 2
43 99502 ADJ. HANDLE GRIP (40005K24) 1
44 99783B SEAT ROLLER INSERT 6
45 11041 UHMW, SHAFT COVER, 7-1/4" 6
46 11040 SHAFT COVER 4
POWER LIFT
REV.
PART NUMBER
R
81274A_page6
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

A
Frame Detail
Hardware Detail
9
4
STEP 15
Item #60
3/8"X1-1/4"
60
Instructions
15.) Attach item 9 to item 4 using the (4) 3/8"X1-1/4"
bolts provided.
Note: DO NOT over tighten fasteners into Back
Cushion.
A 6/4/19
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 82308 1
2 82309 1
3 82310 1
4 82311 1
5 16587B
ASSY, PAD, 12" BACK CUSHION,
BENCH
1
6 82312 1
7 82313 1
8 82314 1
9 82315 1
10 99673 RUBBER COLLAR 10
11 99773
BEARING, 2 BOLT FLG. FOR 1 1/4"
SHAFT
4
12 99620 1/2" -13 NYLON INSERT L.N. 19
13 99520 1/2" -13 X 3-1/2" HHCS ZINC GRD 5 18
14 80010 PLATE, SPACER 18
15 99521 BOLT, HHCS, .5-13X4, GR5, ZINC 8
16 99585 1/2" SAE FLATWASHER 40
17 99571 1/2" -13 THIN NYLON LOCK NUT 15
18 99670 BRONZE, .75X1X.75, FLANGED, 841 4
19 60004PL BUSHING, .75X.12X4.09 4
20 82215 2
21 82216 2
22 82214 2
23 99594 2
24 99766 4
25 99563 RUBBER FOOT PAD 2
26 99603 1/2"-13X3" HHCS ZINC 4
27 80494 LABEL, SEAT ADJUST NUMBER 1
28 71102PL SHAFT, SEAT STOP 1
29 99779B SEAT RACK FRONT 1
30 99682 BOLT, FHSCS, .5-13X4, BL-OX 1
31 99778B SEAT RACK BACK 1
32 80096 WLDT, SEAT 1
33 99781B SEAT ROLLER 3
34 99010 3/8" -16 X 4-1/4" HHCS 3
35 99784 1
36 99782 6203-2RS BEARING 6
37 80099 WLDT, SEAT LEVER 1
38 99531 WASHER, FLAT, .375, USS 8
39 99540 NUT, .375-16, LOCK, NYLON INSERT 3
40 80030 ASSY, SEAT PAD 1
41 99664
BOLT, HHCS, .375-16X3-3/4", GR5,
ZINC
2
42 99530 3/8" LOCK WASHER 2
43 99502 ADJ. HANDLE GRIP (40005K24) 1
44 99783B SEAT ROLLER INSERT 6
45 11041 UHMW, SHAFT COVER, 7-1/4" 6
46 11040 SHAFT COVER 4
47 99954 6
Item No. Part Number Part Name Qty
4 82311 SEAT FRAME 1
9 16587B BACK CUSHION 1
Item No. Part Number Part Name Qty
60 99954 3/8"X1-1/4" BOLT 4
POWER LIFT
REV.
PART NUMBER
R
81274A_page7
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date