
Kanaaldijk Noord 111 | 5642 JA | Eindhoven | Nederland
Page 5 of 9
©2018 PowerOak B.V. Netherlands
Charging K2
AC Charger
Put DC output connector of the AC charger into K2's input port, and connect to the wall AC
outlet.
Product Characters
1. Support charging and discharging at the same time.
2. Press ON-button: fast turn on, LED indicates the remaining power.
3. Press OFF-button: stay 2s for power off.
4. Auto turns off: K2 turns off automatically in the 30s if no load.
5. LED lights in discharging status
0-25%: LED1 lighting
25%-50%: LED1, LED2 lighting
50%-75%: LED1, LED2, LED3 lighting
75%-100%: LED1, LED2, LED3, LED4 lighting
Low voltage alarm: LED 1 flashing
6. LED lights in charging status
0-25%: LED1 flashing
25%-50%: LED1 lighting, LED2 flashing
50%-75%: LED1, LED2 lighting, LED3 flashing
75%-99%: LED1, LED2, LED3 lighting, LED4 flashing
100%fully charged: LED1, LED2, LED3, LED4 lighting
All LED indicators light off when charging cable is disconnected.