Ppa C36 User manual

C36 Smart Alarm

Self-monitored alarm board by Android and IOS app with sending

notiﬁcation in real time, automation and integration with the PPA On line

through the internet via a Wi-Fi connection. Fast and simple registration,

intuitive operation.

Main features:

- Equipped with switched power supply;

- Siren output;

- 12V 7Ah battery charger;

- 1 conﬁgurable auxiliary output;

- 4 wired zones;

- Up to 32 wireless zones;

- Up to 32 remote controls;

- Internal, intelligent, timed and 24h zones;

- Internal arming by control key;

- Led (armed and disarmed status);

- Programmable siren time;

- Programmable exit time;

- Programmable entry time;

- Conﬁgurable arm/disarm beep;

- Shutdown function on sensors and zones (ignores after 4 shots);

- Monitors battery and power failure;

- Protection against battery short.

Technical features:

Power: 90-240Vac;

Battery: Lead acid 12V 7Ah;

Wi-Fi communication: 802.11 b/g/n 2.4GHz standard;

Wireless Sensors: Open Standard, Fixed Code Compatible with HT6P20;

Remote controls: PPA rolling code, anti-cloning;

Consumption: 300 mA (max);

Dimensions: 230x240x100mm (HxWxD);

Weight: 690g.

Leds:

POWER: Power indicator on source input

STATUS PROG: Reception indicator from a wireless remote control or

sensor

PROG WIFI: WiFi connection status indicator.

Oﬀ = Initializing / Oﬄine

Fast ﬂashing = Smart registration mode.

Slow ﬂashing = AP registration mode.

Flashing 1 time = Searching for Wi-Fi signal.

Flashing 2 times = Searching cloud server.

On = Connected to Wi-Fi and cloud.

STATUS: Armed board indicator (On) Disarmed (Oﬀ) Shooting (Flashing)

Keys:

PROG: Learning remote controls / Wi-ﬁ connection setup, follow the

app instructions.

APRENDER: Learn wireless sensors / Reset to factory default.

Connections:

CN2: Switched source input of the board.

12V / GND: Power output for sensors.

Z1: Zone 1 wired sensor input. Can be disabled by closing jumper Z1.

Z2: Zone 2 wired sensor input. Can be disabled by closing jumper Z2

Z3: Zone 3 wired sensor input. Can be disabled by closing jumper Z3

Z4: Zone 4 wired sensor input. Can be disabled by closing jumper Z4

SIRENE / GND : Connection to siren.

NA: Auxiliary relay normally open contact.

CO: Auxiliary relay common contact.

NF: normally closed contact of the auxiliary relay.

Operation:

Wireless sensors programming: With the board in Disarmed mode.

Press the 'Learn' key brieﬂy, 'Status Prog' LED ﬂashes quickly. Trigger the

wireless sensor.

Programming the remote controls: With the board in Disarmed mode.

Press 'Prog' key brieﬂy, 'Status Prog' LED ﬂashes quickly. Press a button

on the remote.

Product description:

Panic Trigger: Press any key on a remote control registered and hold for

3s or more.

Reset to Factory Default: Press the 'Learn' key and the keep it pressed

for 15s until the 'Status Prog' led turns on. All remote controls and

sensors will be erased and settings will return to factory defaults. (WiFi

connection setting is not aﬀected).

Trigger: When there is a sensor violation or panic trigger, the board will

activate the siren for the programmed time (default 5 min), the STATUS

led ﬂashes fast indicating the trigger until the board is disarmed or

rearmed.

Auxiliary Relay: The auxiliary relay provides a dry contact output for

trigger loads such as high-powered lamps, sirens, or provide status to

other equipment. Its default operation is to trigger along with the siren

output and can be customized in the app as to triggering time and mode.

The possible trigger modes are: Trigger with the control panel disarmed,

with the board armed, with the internal arming and with the trigger.

Sensor inputs: (Z1, Z2, Z3, Z4). One or more wired sensors can be

connected between terminals Z(1-4) and GND. It will be considered

violated if the connection is interrupted.

Jumpers Z(1-4): If closed, deactivate the zone corresponding Z(1-4).

Unused zones must be disabled.

Siren Output: The output is suitable for connecting one or more sirens

with total consumption of up to 1A. If this output goes into a short circuit

or presents a very high consumption due to a defect or an attempt at

sabotage, the “Siren Sensor” will be violated and the board will be

triggered. In this situation, it is ideal to have a second siren installed with

the PGM relay in the “Start with siren” mode.

Application:

Search the store for the 'PPA ON' app.

Create the account in the app.

Add a device.-> Alarm (Wi-Fi)

Keep the cell phone close to the module at the installation site. Check

that the signal level of the mobile Wi-Fi network is good.

Press the PROG button for 5s.

Follow the onscreen instructions.

WARNING:

Do not use the equipment

without referring to this

manual rst.

P30394 - 10/2022

Rev. 1

MANUAL

C36 SMART

ALARM

Historic:

Displays the history of the latest

alarm events, like arming,

disarming, shooting, etc..

Accessories:

Screen for registration and

consultation of accessories

(wired and wireless sensors and

remote controls).

PPA

Restart device ﬁrst

If the Wiﬁ Led (Blue) is ﬂashing quickly,

skip the reset step.

1 On

2 Press the PROG button for 5 seconds

3 Make sure the Wiﬁ Led (Blue) is ﬂashing

quickly

Conﬁrm that the Wiﬁ Led (Blue)

is ﬂashing quickly

Select a 2.4GHz Wi-Fi network

and enter the password.

If Wi-ﬁ is 5GHz, set it to 2.4GHz before

proceeding. Common method of

router conﬁguration.

Add device

Make sure the device is turned on

Accessories Accessories

Wireless Wireless

Wireless Sensor 0

Type: Contact

Zone: Normal

Type: Movement

Zone: Internal

Type: Movement

Zone: Timed

Type: Movement

Zone: Normal

Type: Movement

Zone: Normal

Type: Movement

Zone: Normal

Type: Panic

Zone: 24h

Status: Normal

Wireless Sensor 1

Wireless Sensor 2

Panic

Unknown 1?

Unknown 2?

Unknown 3?

Sensor Remote Control Sensor Remote Control

Wired Sensor Wired Sensor

Standard Control

Cancel

EZ mode

Restart devices

Password

Analyze

the devices

device on

the Cloud

Start

the device

Accessory Types:

Wireless Sensor: Sensors and remote controls with ﬁxed code for panic

triggering. The board allows up to 32 devices of this type.

Remote Control: Remote Controls with Rolling Code Compatible with

PPA. (Ex.: ZAP4 and Slim models). Up to 32 registered remotes are

allowed.

Wired Sensor: Inputs for wired switchboard sensors (Z1,Z2,Z3 and Z4)

and siren sensor. When deleted, these devices return to the factory

default settings.

Zone Type:

Immediate: Default zone type, triggers the siren and sends notiﬁcation

if the switch is armed.

Internal: Special zone for motion sensors and interior doors, which do

not trigger when the alarm is in 'Internal Arm' mode. Ideal for when the

alarm is armed with residents within the protected perimeter.

24 Hours: Zone that triggers the siren and notiﬁcation at all times, even

with the alarm in 'Disarmed' mode, ideal for use with panic devices and

perimeter sensors such as electric fence alarm outputs.

Delayed: Zone that ignores triggers within the tolerance time for input

and/or output programmed into the system.

Follower: This zone type behaves like an Immediate zone normally,

however, it becomes a Delayed zone if a Delayed type zone is in time

count.

Zone Attribute:

None: Standard operation.

Smart: With this attribute type there must be 2 openings in the zone in

less than 1 minute or an opening lasting longer than 1 minute to be

considered a violation. It is generally used to prevent false triggering on

some types of wired sensors. Has no eﬀect on wireless sensors.

Silent: When triggering it does not trigger the siren, but sends the

notiﬁcation to the application normally.

Not Self Bypassing: The zone does not obey the autobypass rule after 4

shots.

Add

Tipo: Movimiento

Zona: Normal

Tipo: Movimiento

Zona: Normal

Status: Normal

Desconocido 2?

Desconocido 3?

Delete/Edit name

Accessories

Wireless

Wireless Sensor 0

Type: Contact

Zone: Normal

Type: Movement

Zone: Internal

Type: Movement

Zone: Timed

Type: Movement

Zone: Normal

Type: Movement

Zone: Normal

Type: Panic

Zone: 24h

Status: Normal

Wireless Sensor 1

Wireless Sensor 2

Panic

Unknown 2?

Unknown 3?

Sensor Remote Control

Wired Sensor

Slide left

Settings:

Arm/Disarm Sound: Activates the Arm or Disarm notiﬁcation function

disarm the board by the siren output. It emits two beeps to indicate

board disarming and one beep to indicate disarming. The PGM output

does not trigger in this case even if it is in the “Sir with Siren” mode.

PGM Output Mode: Selects the relay triggering condition PGM.

Possible conditions: Trigger with siren, Trigger in Arming mode,

Triggering in Internal Arming mode or Triggering in Disarmed mode.

PGM output: (Enabled / Disabled) Indicates whether the siren must be

activated in case of a trip.

PGM time: Time in minutes for activating the PGM output. After the

conﬁgured time, the output is deactivated. A time equal to zero indicates

triggering with hold (inﬁnite as long as the triggering condition remains).

Siren Trigger Time: Time in minutes for activating the siren. After the

conﬁgured time, the siren is deactivated.

Siren Output: (Enabled / Disabled) Indicates whether the Siren must be

activated in the event of a trip.

Entry Delay: Tolerance time for triggering 'Delayed' type zones after

their violation. It is commonly used to allow the user to enter within the

perimeter and have a short period of time to disarm the switch without

ﬁring it.

Exit Time: Tolerance time for triggering zones of the type after the

switch is placed in 'Arm' or 'Internal Arm' mode. Violations in sensors in

these zones within the programmed time do not trigger the switch. It is

used to allow the user to arm the switch when leaving the secured

perimeter.

Made by:

Motoppar Indústria e Comércio de Automatizadores Ltda

Av. Dr. Labieno da Costa Machado, 3526 - Distrito Industrial

Garça - SP - CEP 17406-200 - Brasil

CNPJ: 52.605.821/0001-55

www.ppa.com.br | +55 14 3407 1000

GENERAL TERMS AND CONDITIONS OF WARRANTY

MOTOPPAR, Industry and Commerce of Automatic Gate Operators

Ltd., registered with the CNPJ (National Registry of Legal Entities)

under Number 52.605.821/0001-55, located at 3526 Dr. Labieno da

Costa Machado Avenue, Industrial District, Garça – SP – Brazil, Zip

Code 17400-000, manufacturer of PPA Products, hereby

guarantees this product against design, manufacturing or assembly

defects and/or supportively as a result of material quality ﬂaws that

could make its intended use improper or inadequate, within a legal

period of ninety days from time of acquisition, provided that the

installation instructions described in the instruction manual are

observed.

Due to the credibility and trust placed on PPA products, we will add

275 more days to the period mentioned above, reaching a warranty

period of one year, likewise counted from the time of acquisition

proven by consumer through proof of purchase (Customer Receipt).

In case of defect, within the warranty period, PPA responsibilities are

restricted to the repair or substitution of the product manufactured by

the company, under the following conditions:

1. Repair and readjustment of equipment may only be carried

out by PPA Technical Assistance, which is qualiﬁed to open,

remove, and substitute parts or components, as well as repair

defects covered by this warranty; thus, failure on observing

this guideline and the veriﬁed use of any non-original parts will

cause the resignation of this warranty on the part of the user;

2. The warranty will not extend to accessories such as cables,

screw kit, ﬁxing brackets, power supplies etc.;

3. Expenses for packaging, transportation and product

reinstallation will be sole responsibility of the consumer;

4. The equipment must be sent directly to the Company

responsible for the sale (manufacturer's representative),

through the address contained in the purchase invoice,

properly packed, thus avoiding loss of the warranty;

5. Within the additional period of 275 days, visits and

transportation in places where authorized technical

assistance is not available will be charged. The cost of

transportation of the product and/or technician will be sole

responsibility of the consumer and

6. The substitution or repair of the product does not prolong the

warranty time.

This warranty will be terminated if the product:

1. Is damaged by natural agents, such as atmospheric

discharges, ﬂoods, wildﬁres, landslides etc.;

2. Is installed in an improper electric power supply or if it is not

according to any of the installation instructions displayed on

the manual;

3. Shows defects caused by droppings, collisions or any other

physical accident;

4. Shows signs of product violation or attempted repair by

unauthorized personnel;

5. Is not used for its intended purpose;

6. Is not used under normal conditions;

7. Is damaged by accessories or equipment connected to it.

Recommendation:

We recommend that both the installation and the maintenance of the

operator to be performed by an authorized PPA technical service. If

the product fails or has an improper operation, seek an Authorized

Technical Service to ﬁx it..