Prem-I-Air TC1046 User manual

S
SE ER RV VI IC CE EW WA AR RR RA AN NT TY Y
Do not operate the unit with a damaged cord or plug after the unit,
malfunctions has been dropped or damaged,.
For your convenience record the complete model number and product name,
(located on the Product Identification Plate the date you purchased the),
product and attach your purchase receipt as proof of purchase,.
To ensure your product is covered by warranty the complete,faulty product
together with your purchase receipt should be returned to your retailer.
This product has been manufactured to comply with EEC Directives
2006/95/EG and EEC89/336/
Waste electrical products should not be disposed of with
household waste Please recy.cle where facilities exist Check.
with your Local Authority or retailer for recycling advice.
EHS Manchester M RN,,171
EHS 02/08
Please read and retain these
instructions for future reference
ONE YEAR LIMITED WARRANTY(1)
Save This Warranty Information
EHS International Ltd Guarantees th(). is product free from defects in
materials and workmanship for a period of one year(1) .
Should this unit be operated under conditions other than those
recommended at voltages other than th,e voltage indicated on the unit or,
any attempts made to service or modify the unit will render this,
WARRANTY VOID.The product you buy may sometimes differ slightly
from illustration This warranty is in.,,addition to and does not affect your
statutory rights.
Should you have a problem with this product please call our Help Desk on,:
[phone].
Model TC1046
10000 BTU Mobile Air Conditioner
14

2 3
SPECIFICATION
Model no.
Cooling capacity 10000 /BTU hr
2930 watts
Power Ampere consumption for cooling/ * 1050 / 4.5WA
Air volume max speed( . ) 360 /mh
3
Humidity removal capacity 28.8 /L day
Recommended room size
Power supply 220~240 /50 /1V Hz phase
Compressor rotary
Refrigerant 410RA
Refrigerant load* 410 g
Fan speed 2
Timer 1 - hours24
Working temperature :18~32Cooling oC
Exhaust pipe Diamenter x mm27 1500
Net Weight 29kgs
Dimension HxDxW()
Please note The data marked with may vary for technical reasons for:'*' :
greater precision please refer to the rating label placed at the back of the unit,.
Measuring condition for above is Cooling DB WB:27,19
oCoC
IMPORTANT SAFETY INSTRUCTIONS
1. & .Transport store the unit in an upright position only Leave it in an upright
position for at least hours before first use3.
2. , .Always place the unit on an even level surface
3. An opening in a window or wall is required to accommodate the exhaust
hose to expel the hot air.
4. Ensure the unit is connected to an earthed power supply of the correct
rating Refer to the rating label located at the back of the unit.( ).
5. 18 ~32The unit will cool when the room temperature is between C C
OO
depending on the thermostat setting.
6. DO NOT use this unit for functions other than those described in this
instruction manual.
7. .DO NOT tilt the unit
8. .DO NOT cover or obstruct the appliance inlet and outlet grilles
6. ,Your air conditioner has been designed to be used only in the home
office and similar conditions and should not be used for any other purpose.
7. .This unit is for indoor use only
8. ,Never unplug the air conditioner while it is working this could damage the
electronic circuits.
9. ,DO NOT use the appliance in a wet room such as a bathroom or laundry
room to avoid the risk of electrical shocks.
10. .DO NOT bend or crush the warm air exhaust hose
11. .DO NOT sit or place articles on the appliance
12. .DO NOT use the appliance with wet or damp hands
13. .DO NOT let chemical substances come into contact with the appliance
14. DO NOT use the appliance in the presence of flammable substances or
vapours such as alcohol insecticides petrol etc,,,.
15. .DO NOT use the plug to start and stop the appliance ALWAYS use the
intended control panel to start and stop the unit.
16. ALWAYS turn off the appliance when it is not in use and remove the
mains plug from the socket outlet.
17. ,ALWAYS turn the unit off and remove the mains plug before cleaning
carrying out maintenance or moving location.
18. , / .Avoid the use of adapter plugs multiple sockets and or extension leads
If their use is necessary ensure they conform to current safety standards,.
19. :Do not pull the electrical cable or place it near a source of heat always
unroll it completely to avoid dangerous overheating If the power cord.
becomes damaged the service agent or a similarly qualified person must,
replace it in order to avoid a hazard,.
20. ,The filter must be used with the product at all times when removing it for
clearing always turn the unit off and unplug the mains plug from the
socket.
21. ,Do not operate the unit with a damaged power cord or plug after it
malfunctions has been dropped or damaged If the power cord is,.
damaged it must be replaced by the manufacturer or a qualified service
engineer to avoid a hazard.
22. Closely supervise any children and pets when unit is in use
23. Only use in the upright position on a
flat level surface at least cm from
any objects
,50
.
-TC
1046
WALL
50cm
50cm
745 395 365xx mm

Wiring Instructions Should it be necessary to change the plug please:
note the wires in the mains lead are coloured in accordance with the
following code :
BLUE NEUTRAL-
BROWN LIVE-
GREEN AND YELLOW EARTH-
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your plug,
proceed as follows:
1. The BLUE wire is the NEUTRAL and must be connected to the terminal
which is marked with the letter N or coloured BLACK.
2. The BROWN wire is the LIVE and must be connected to the terminal
which is marked with the letter L or coloured RED.
3. /The GREEN YELLOW is the EARTH and must be connected to the
terminal which is marked with the letter E or or coloured GREEN OR
GREEN YELLOW/.
4. .Always ensure that the cord grip is positioned and fastened correctly
If a A BS fused plug is used it must be fitted with a A BS13 ( 1363) 13 ( 1362)
fuse If in doubt consult a qualified electrician..
Wiring for a Amp Plug BS13 ( 1363)
Please note The Earth Terminal is marked with the letter E or Earth Symbol.
PARTS
Front Back
ACCESSORIES
Exhaust hose
Drain tube for continuous drainage
BS PLUG WIRING INSTRUCTIONS
1. Control Panel
2. Air outlet
3. Carrying handle
4. Caster
5. Air filter
6. Air inlet
7.
cord compartment
8. Exhaustair outlet
9. drainage point
Cord storage Power--
Drain cap ()installed on unit
4 5

Active carbon filter
Remote control
Round cap for filling the hole in wall window/.
Outdoor adaptor for insertion over hose and into hole in-
the wall window/.
INSTALLATION
This unit is a portable air conditioner which can be moved from room to room,.
Using the adaptor
Cut a mm diameter hole in the130
wall or window using the,
appropriate tools and safety
equipment.
Feed exhaust hose through the
window or wall and attach the
outdoor adaptor from the outside
as shown.
When not in use cover the hole,
with the cap provided.
Installing the exhaust hose
Use only the hose provided and clip exhaust hose and unit adaptor to the
back of the air conditioner.
Avoid kinks and bends in the
exhaust hose as this will cause
expelled moist air to build up
causing the unit to overheat and
shut down.
The hose may be extended from
300 1500 ,mm to mm but for
maximum efficiency use the
shortest length possible.
WARNING!
Installing the carbon filter
1. Remove the filter frame from the
unit.
2. Remove the active carbon filter
from its plastic bag.
3. Insert the active carbon filter into
the back of the unit.
4. Re fit the filter frame inside the-
unit.
Wall or window
outdoor adapter
Do not replace or extend the hose
.as this could cause the unit to malfunction
Rubber Plug ()installed on unit
Adaptor for insertion ov er hose-
hole in the wall window/).
an d into window
spacer or into(
6 7

ventilation settings.
Turning On Off/
Sleep function
1. ,By pressing the SLEEP button in cooling mode the set temperature will
increase C after the st hour and another C after the second hour11 1 .
Unit will then stay at that temperature.
OO
Close doors and windows.
Keep curtains and blinds closed during the sunniest part of the day.
Regularly clean filters.
Once room has reached the desired conditions reduce temperature and,
1. / , .Press button the unit will start automatically If the ambientON OFF
temperature is
-23, .higher than C the unit will work in cooling model
o
-20 23,higher than C but below or equal to C the unit will work in
oo
ventilation model.
2. Indicators of the functions in progress come on at the same time NOTE.
The display window shows the ambient room temperature from oC
0
to oC50
3. To turn the unit off press ON OFF button again,/ .
Setting mode function/
Press MODE button to select required working mode automatic cooling or:,
fan The indicator of your selected mode comes on..
Setting temperature
1. ' ' ' 'Press Temperature up or Temperature down button to set the desired
temperature.
2. The display window will show the temperature you set as you press
''' '.,Temperature up or Temperature down button Otherwise it will always
show the ambient temperature
The pre set temperature of this machine is oC for cooling
.
-:24
3.
Setting ventilation speed
1. ( ).Press SPEED button to choose the ventilation speed you high or low
The speed indicator light will indicate which speed setting is in use.
2. If the unit is in AUTO mode it will choose the ventilation speed,
automatically according to the ambient temperature the related(
indicators will light on at this time the speed switch is invalid), , .
Setting timer
1. .Press TIMER button to set your desired running time The timer
indicator will illuminate to show the number of hours selected.
When the running time has ended the air conditioner will turn off,
automatically The display window will show the hour s you set.()
as you press TIMER button If the timer button is not pressed the.,
unit will work continuously.
2. By pressing the timer but without turning on the other functions,
you can PRE SET the time for the machine to work For example-.,
if you press the timer to the unit will work automatically after'2', 2
hours.
OPERATING INSTRUCTIONS
For Maximum Efficiency
1. ( )Speed ventilation button
2. Timer
3. Display window
4. Receiver for remote control
5. ( )Mode function button
6. Automatic mode indicator
7. Cooling operating indicator
8. Fan operating indicator
9. " "Temperature up button
10. " "Temperature down button
11.Power indicator
12. " "Water Full indicator
13. ON OFF/( )power button
14. Sleep function button
15. 2 ( )/ ( )TiO UV ionizer button optional
16. Compressor operation indicator
17. 2 / ( )TiO UV ionizer indicator optional
18. Sleep operating indicator
19. Timer operating indicator
20. Low ventilation indicator
21. High ventilation indicator
SLEEP
TIMER
SPEED
COMP.
hi
lo
DOWN
UP
MODE COOL
auto
FA N
8 9

2. , .In sleep mode ventilation remains at low speed
3. Press the EEP button and the temperature and ventilation speed
will return to those preselected.
4. The unit will shut down automatically after the SLEEP function has
been running for hours12 .
5. ,Please note the sleep function is not available while the unit is
working ventilation dehumidification or auto mode It is only,.
available in cooling.
6. ,When the machine is in sleep function the Fan Speed will remain
in Low Speed.
Remote control
All the above functions can also be performed with the
supplied remote control This remote control requires x CR. 1 2025
battery to operate.
Note Batteries contain materials which are hazardous to:,
the environment they must be removed from the appliance;
at the end of their life and disposed of safely.
Regulating air flow direction
Turn the roller on the air vent
horizontally to control the air flow
direction.
NOTE
1. ' , ,To prolong the compressor s life after switching off the unit please wait
forat least minutes before switch back on
The cooling system will switch off if the ambient temperature is lower
3.
2.
than the termperature set The ventilation however keeps working on.,,
the set level If the ambient temperature rises above the selected level.,
the cooling system will start operating.
DRAINAGE
This unit is self evaporating and the condensate will vent out of the exhaust
hose However during the coiling process any excess will collect in the.,
reservoir inside the unit.
If the reservoir is full the compressor and motor will stop operating and the
unit will make a beeping noise and the Water Full light will flash Pressing(), .
any button on the control panel will stop this sound.
To enable the cooling system to start operating again the water inside the unit,
required draining in one of the following ways
Turn off the air conditioner
:
1.
and unplug from the power
socket While the reservoir.
is full avoid moving the unit,.
2. Position the water tray
underneath the drain hole.
3. Remove the drain cap and
rubber plug from the drain
hole and allow the water to
drain out.
4. Once drained replace the
rubber plug and firmly
tighten the drain cap.
5. -Switch on the unit the Water Full
light should not be flashing.
If you wish to operate the unit without the need to empty you can fit the,
optional drain hose.
1. Remove the drain cap and
rubber plug and retain for,
future use Connect the drain.
tube supplied as shown and
locate the other end into a
drain.
2. The drain tube may be
extended by adding
an extension tube and using a
suitable connector not,(
supplied by the manufacturer)
Approx mm outer diameter18 .
Please note
The drain must be at or below the outlet level.
Flashing Water Full indicator will not function in this mode of
drainage.
Water hole
Rubber plug Drain knob
Drain knob
Rubber plug
10 11

MAINTENACE
Always switch off and unplug the air conditioner from the mains before
cleaning To maximize the efficien.cy of the air conditioner clean
regularly.
Cleaning the housing
Use a soft damp cloth to wipe the body clean Never use aggressive,.
chemicals petrol detergents chemically treated cloths or other cleansing,, , ,
solutions These could all damage the unit casing..
Cleaning the filter
Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt
from the filters and then rinse thoroughly under running water no hotter than(
40°C Dry thoroughly before replacing Never operate the unit without the). .
filters.
End of season storage
• Drain any water in the unit before completely operating the unit on
ventilation only mode for a few hours to thoroughly dry the inside,.
• Clean or change the filter.
• Unplug and store the power cord as shown.
• Replace in the original carton or cover for storage.
TROUBLE SHOOTING
The air conditioner does not run
• Is the air conditioner plugged in?
• Is there a power failure?
•
• Is the room temperature below the set temperature?
The machine seems to have little cooling effect
• Is there direct sunshine Please close the curtains or blinds?( .)
• Are too many windows or doors open?
• Are there too many people in the room?
• Is there something in the room producing lots of heat?
The machine is not cooling
• Is the filter dusty contaminated,?
• Is the air intake or output blocked up?
• Is the room temperature below your selected temperature?
Too noisy
• Is the machine positioned unevenly thus creating vibration,?
• Is the floor underneath the machine uneven?
The compressor doesn't run
• It is possible the overheat protector for the compressor is in operation.
Wait for the compressor to cool down.
*Never try to repair or dismantle the unit yourself
Is the indicator flashing?
Wa te r F u l l
12 13