Premium Poly Patios Luxcraft Crestville Adirondack 2 User manual

2' Adirondack Poly Glider
(A) - Seat Assembly
(B) - Back Assembly
(C) - Glider Base right side
(D) - Glider Base left side
(E) - Front & Back Cross ieces
(F) - Lintels
(G) - Bearing Su ort Arms
(H) - Armrest Assembly right side
(I) - Armrest Assembly left side
Hardware
2 -5/16" x 4" Bolt
2 - 5/16" x 3" Bolt
4 - 5/16" x 2 1/2" Bolt
4 - Large Nut (3/8")
8 - Small Nut (5/16")
24 - Washers
48 - 2" Screws
1. 2.
3.
Attach (E) Front Cross iece to Glider Base Sides
using 2" Screws. **Be sure to match all letters and/or numbers**
Attach (E) Back Cross iece to Glider Base
Sides using 2" Screws.
**Be sure to match all letters and/or numbers**
Attach (F) Bearing Su ort Arms to Glider Base
Bearing Arms using 2" Screws.
**Be sure to match all letters and/or numbers**
2" Screws
A.
B.
.
D.
E. F. G.
H.
I.
Premium Poly Patios - Poly Lumber Furniture
www.Poly-Lumber-Furniture.com

*Hex Head Bolt require 2 Washers - Between bolt head - product & nut - product.*
*Hex Head Bolt require 2 Washers - Between bolt head - product & nut - product.*
*Hex Head Bolt require 2 Washers - Between bolt head - product & nut - product.*
*Hex Head Bolt require 2 Washers - Between bolt head - product & nut - product.*
5. 6.
7. 8.
9.
Attach (A) Seat Assembly to (B) Back Assembly
using 2 1/2" Bolts in to hole on each side.
**Be sure to match all letters and/or numbers**
Slide Seat & Back Assembly between Armrests
and install 4" Bolts in back u right and bottom
hole of seat assembly.
**Be sure to match letters and/or numbers**
Attach seat to front leg using 3" Bolts. Attach armrest to back su ort using 2 1/2"
Bolts.
Attach (F) Lintels to each side using 2" screws.
**Be sure to match all letters and/or numbers**
4.
Attach Armrest Assemblies to both sides of Glider Base.
Assembly order is: Washer - Armrest Assembly - Washer - Large Nut.
Washer
Washer
Armrest Assembly
Large Nut
2" Screws
Premium Poly Patios - Poly Lumber Furniture
www.Poly-Lumber-Furniture.com