Premium Poly Patios Luxcraft / Crestville Plain 5 ft. Poly... User manual

5' Plain Poly Glider
(A) - Seat Assembly
(B) - Back Assembly
(C) - Glider Base right side
(D) - Glider Base left side
(E) - Bearing Supports
( ) - Armrest Assembly right side
(G) - Armrest Assembly left side
(H) - ront & Back Crosspieces
(I) - Crosspiece Supports
(J) - Lintels
Hardware
2 - 5/16" x 4" Bolt
2 - 5/16" x 3" Bolt
8 - 5/16" x 2 1/2" Bolt
4 - Large Nut (3/8")
12 - Small Nut (5/16")
32 - Washer
8 - 2 1/2" Screws
48 - 2" Screws
A.
B.
C. D.
E.
F. G.
H.
I.
J.
1. Attach (H) ront Crosspiece to Glider Base Sides
using fourteen 2" Screws.
**Be sure to mat h all letters and/or numbers**
2. Attach (H) Back Crosspiece to Glider Base Sides
using fourteen 2" Screws.
**Be sure to mat h all letters and/or numbers**
3. Install (I) Crosspiece Supports between Crosspieces
and attach using eight 2" Screws.
**Be sure to use all letters and/or numbers**
2" Screws
2" Screws
2" Screws
2" Screws
Premium Poly Patios - Poly Lumber Furniture
www.Poly-Lumber-Furniture.com

4. Attach (E) Bearing Supports to Glider Base
Bearing Arms using four 2 1/2" Screws on each side.
**Be sure to mat h all letters and/or numbers**
2 1/2" Screws
5. Attach Armrest Assemblies to each side.
Assembly order is: Washer - Armrest Assembly - Washer - Large Nut
Washer
Washer
Armrest Assembly
Large Nut
*Hex Head Bolt require 2 Washers - between bolt head - produ t & nut - produ t.*
*Hex Head Bolt require 2 Washers - between bolt head - produ t & nut - produ t.*
*Hex Head Bolt require 2 Washers - between bolt head - produ t & nut - produ t.*
10. Attach (J) Lintels to each side using 2" Screws.
**Be sure to mat h all letters and/or numbers**
2" Screws
6. Attach (A) Seat Assembly to (B) Back Assembly
using six 2 1/2" Bolts. Use two bolts in center
supports and one in top hole per outside supports.
**Be sure to mat h all letters
and/or numbers**
7. Slide assembled Seat & Back between Armrests
and install 4" Bolts in back upright and bottom
hole of seat assembly on each side.
**Be sure to mat h all letters and/or numbers**
8. Attach seat to front leg using 3" Bolts. 9. Attach Armrest to back support using 2 1/2"
Bolts.
Outside
Center
*Hex Head Bolt require 2 Washers - between bolt head - produ t & nut - produ t.*
Premium Poly Patios - Poly Lumber Furniture
www.Poly-Lumber-Furniture.com