Premium PAC12040A User manual

Modelo/Model:
Aire Acondicionado Air Conditioner
PAC9040A PAC12040A
PAC12520A
PAC13040A
PAC18040A
PAC24040A
013374

32

CONTENTS
Safety Precautions--------------------------------------------------------------------
WEEE Warning----------------------------------------------------------------------------
Parts Names
---------------------------------------------------------------------
Operation------------------------------------------------------------------------------------
Remote controller operation
------------------------------------------------
Manual operation
--------------------------------------------------------------------
Notices-----------------------------------------------------------------------------------------
Checking before operation
---------------------------------------------------
Safety tips
-------------------------------------------------------------------------------
Care and Maintenance
--------------------------------------------------------------
Cleaning
----------------------------------------------------------------------------------
Maintenance
--------------------------------------------------------------------------
Troubleshooting
------------------------------------------------------------------------
Installation Guide ----------------------------------------------------------------------
Customer Guide ----------------------------------------------------------------
Notices
-------------------------------------------------------------------------------------
Buttons description ---------------------------------------------------------------
How to Use
-------------------------------------------------------------------------------------------
Fix batteries -------------------------------------------------------------------------
Automatic operation mode ----------------------------------------------
Cooling/Heating operation mode ----------------------------------
Fan operation mode ------------------------------------------------------------
Drying operation mode -----------------------------------------------------
Attention -----------------------------------------------------------------------------------
Night Luminous Function of Remote Controller
1
2
3
4
4
4
5
5
5
6
6
6
6
8
8
8
9
13
13
13
13
14
14
15
14
------------
31

WARNING
Safety Precautions
Incorrect operation due to ignoring instruction will cause harm or damage.
The seriousness is classified by the following indications
WARNING
CAUTION
This symbol indicatesthe possibility ofdeath or seriousinjury.
This symbol indicates the possibility of injury or damage to properties only.
The power plug must be inserted tightly.
Otherwise, it can cause
electric shock or overheating,
even fire.
It can cause electric shock
or fire.
Don t pullout the powerplug during
operation or withwet hands.
,
Don t pull the power cord when pull
out the power plug.
,
The damage of pulling
power cord willcause
serious electric shock.
Don t install air conditioner in a place
where there is flammable gas or liquid.
The distance between
them should above 1m.
,
Don t put a finger, a rod or other object
into the air outlet or inlet.
As a fan is rotating at a high
speed, it will cause injury.
,
It may cause fire.
It may clampyour finger
and damage thedriving
parts of thewind vanes.
,
Don t touch the swinging wind vanes.
Don t attempt to repair the air
conditioner by yourself.
,
You may be hurt or cause
further malfunctions.
Children should be supervised to ensure
that they do not play with the
appliance.
Stop operation and cut off the main power
in storm or hurricane. Operation
with windows opened may
cause electric shock.
Lightning
The air conditioner must be grounded.
Incomplete grounding may result in
electric shocks. Do not connect the ground
wire to the gas pipeline, water pipeline,
lightning rod, or telephone ground wire.
Cut off the
power supply
switch
Cut off the main power switch when not
using the unit for a long time.
Otherwise, it may cause
failure or fire.product
An earth leakage breaker with rated capacity
must be installed to avoid
possible electric shocks.
Danger
Take care not let the remote control
and the indoor unit watered or
being too wet,or may short
circuit even causefire
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been
given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
Don t share the socket with other electric
appliance, and use the broken or
unstandord cord.
Otherwise, it
can cause electric shock even fire.
Clean the dust on the plug regularly.
Otherwise the dust mixed, humidity
will result in insulation fault even fire.
Don t use liquid or corrosive cleaning
agent wipe the air-conditioner and
sprinkle water or other liquid
either. Otherwisethe enclosure
will be damaged even electric
shock.
,
,
130

1.Don t installthe indoor unitunder direct sunlight.
2.Don t block air inlet or air outlet, otherwise, the cooling or heating capacity will be
weakened, even cause system stop operating.
3.Don t apply the cold air to the body for a long time. It will deteriorate your physical
conditions and causehealth problems.
4.Close the windows and doors, otherwise, the cooling or heating capacity will be
weakened.
5.If the air filter isvery dirty, the cooling or heating capacity will be weakened. Please
clean the air filter regularly .
6.It is prohibited to standor put things onto thetop of the outdoor, to avoid drop or
damage. In nocase should childrenbe allowed tosit on the outdoor unit.
7.Set a suitabletemperature, especially ifthere are oldpeople, children andpatients
in the room.Generally, keep the temperature difference for 5 between the inside
and outside.
8.In case thatthe unit occursclosing down dueto the severe interference from outer
environments such asmobile phone, pleasecut off the plug and plug in to restart
the air conditioner after several seconds .
9.It is forbiddento let theair conditioner keepprecision instrumentation, artistic
production for longtime and makefood fresh, otherwise abnormal using will cause
damage and weaken.
10.It is forbidden to let children and the disabled use air-condition without adult
super vision.
11.Open windows frequently after using air-condition for a long time.
12. If the equipement emissions cannot meet the technical requirement of
IEC 61000-3-3,FollowingAttention should betake care.
Attention!
Through poor conditions of the electrical MAINS, shortly voltage drops can appear
when starting theEQUIPMENT. This can influence other equipment (eg. Blinkingof
a lamp). Ifthe MAINS-IMPEDANCE Zmax< OHM(See attached nameplate),
such disturbances are not expected. (In case of need, you may contact your local
supply authority forfurther information).
CAUTION
WEEE Warning
Do not dispose of electrical appliances as unsorted municipal
waste, use separatecollection facilities.
Contact you local government for information regarding the
collection systems available.
If electrical appliancesare disposed ofin landfills ordumps,
hazardous substances can leak into the groundwater and get
into the food chain, damaging your health and well-being.
When replacing old appliances with new ones, the retailer is
legally obligated to take back your old appliance for disposals
at least free of charge.
Meaning of crossed out wheeled dustbin:
,
,
,
2
29

Indoor Unit
Note:
1.If the power supply from outdoor unit, you can find the power supply card is
fitted in the outdoor unit.
2.
.
The descriptions in this user manual text and figures may have slight
difference to the promotion information and actual appliance. Please refer to
the real appliance purchased, Thank you
Parts Names
Indoor Unit
Outdoor Unit
1 Front panel
2 Air filter
3 Handling switch
4 Louver
5 Signal receptor
6 Supply cord
7 Remote controller
8 Drain hose
9 Refrigerant gas/
liquid pipe
10 Cut-off valve
11 Air outlet cover
Outdoor Unit
Air inlet
Air outlet
Air inlet
Air outlet
5
12
3
4
6
7
8
9
10
11
328

3
Operation
Manual operation
Manual operation
When the remote controller does not work or can not be found, please follow
these steps:
1.As the unit is operating, you can press the Auto button
to stop operating.
2.As the unit is stopping, you can press the Auto button
to start operating.
Use your hands to move the vertical airflow
vane and change horizontal wind
direction.
the
Note:
a. Adjustthe horizontal airflow direction before
the air-conditioner starts. Don t insert your finger
into air intake or outlet vents when the air-conditioner is operating.
b. For appliancewith auto pendulumwind function, pleaserefer to air
conditioner remote controller instruction for how to adjust horizontal air flow.
Adjusting air flow direction
1. orizontal air flowmanually.Adjusting h
Remote controller operation
See air conditioner remote controller instruction
2. Adjusting vertical air flowdirection(up-down)
Refer to air conditioner remote controller instruction for how to adjust vertical
direction through adjusting the horizontal airflow vane by remote controller.airflow
Note:
Adjust the verticalair flow directionby remote controller. When youadjust the
airflow vane byhand, the machinemay cause problem.horizontal
When the air-conditioner stops, the horizontal wind vane will close the wind
outlet of conditioner.air
Manual operation canbe used temporarilyin case youcan not useremote
controller or batteries are exhausted.its
8
,
4
27

SET TEMPERATURE( )
SET
ON/OFF
MODE
CLEAN SPEED
SLEEP
FRESH
STRONG
SWING DUST FEELING
HEALTH
FUNGUSPROOF
SCREEN TIMER
AUTO FAN
COOL HIGH
DRY MID
HEAT LOW
1
9
11
13
3
2
4
5
6
7
8
15
14
12
10
FEELING
TIMER
SPEED
TRANSMIT ON/OFF
ROOM
SET
TIMER ON OFF
DIGITAL
RUNNING
MODE
RUNNING
MODE
In order touse the airconditioner properly, please refer to its working temperature
range. Otherwise, indoorunit automatic protectionfunction may beactivated,
cooling or heating efficiency will be weakened.
Safety tips
The air-conditioner maycan t runin normal followedunder mentioned
table
Notices
1.Make sure that the ground wire is connected safely and reliably.
2.Make sure thefilter net isproperly fixed.
3.Make sure that air outlet and inlet are not blocked.
4.Please clean thefilter before startingthe air-conditioner referringto page to6
Cleaning for how to operate.
5.Check to seewhether the outdoorinstall bracket isdamage. If yes, please contact
our Service centerlocally.
Checking before operation
To prevent injury and property damage, Please pay attention to these following before
operating the air conditioner.
Cooling
Heating
Indoor
Outdoor
Indoor
Indoor
Outdoor
18
Dehydrating
43
24
-7
27
18
,
526

Care and Maintenance
Troubleshooting
1.Turn off the air-conditioner and remove the electrical plug from the outlet.
2.Wipe the indoor unit with dry cloth or wet cloth which is dipped by cold water.
Cleaning the indoor unit
Cleaning
Note :
Cleaning air filter
Maintenance
Air filter
Front panel
Air filter
Front panel
Check the following before requesting on service centre if the malfunction occurs.
Don t usethinner, polishingpowder, benzeneand other volatile chemicals.
Don t use water above 45 to wash the panel, or it could cause deformation or depigment.
1.Raise up the front panel of indoor unit until it suddenly stops, then raise up the
protruded part ofair filter, and then take it out.
2. Use a vacuum cleaner or wash it with water, then dry it in the shade.
3. Reinsert theair filter intothe indoor unituntil being entirely fixed, then closethe
front panel.
1. Select FAN operation mode,
make the air conditioner run a
long time todry.
2. Turn off the air conditioner and cut
off the power supply.
4. Clean airfilters and otherparts.
3. Take out the batteries from the remote
controller.
Don t use liquid or corrosive detergent clean the appliance and don t splash water or other
liquid onto it , otherwise, it may damage the plastic components, even cause electric shock.
Phenomenon Trouble shooting
Air conditioner does
not operate at all
Has the power been shut down?
Is the wiring loose?
Is the voltage higher than 1.1 times of max rated voltage
or lower than 0.9 times of min rated voltage?
Is the fuse burnt?
Does it reach the set time for start up?
,
,
,
6
25

Phenomenon Troubleshooting
Remote controller is not available
Is the remote controller out of effective
distance to the indoor unit?
Is the battery exhausted?
Are there any obstructions between the
controller and the signal receptor?
Indoor unit does not operate
immediately when the air
conditioner is restarted
Once the air conditioner is stopped,
it will not operate in approximately
3 minutes toprotect itself.
There is unusual smell blowing from
the outlet after operation is started.
This is caused by the odour in the
room permeated from building
material, furniture, or smoke.
Sound of waterflow can beheard
during cooling operation
This is caused by the refrigerant
flowing inside theunit.
Mist is emitted during cooling
operation.
Mist is emitted during heating
operation.
Because the air of the room is cooled
down rapidly by the cold wind and it
looks like the fog.
This generate due to moisture in
defrosting process.
Low noise can be heard during
operation
A lowhissing sound is caused by
the refrigerant flowing.
A lowsqueak sound is caused by
the deformation ofplastic due to
temperature.
Cooling (Heating)efficiency is not
good
Is the setting temperature suitable?
Is the air inlet or outlet obstructed?
Are air filter dirty?
Is indoor fan speed set at low speed?
Is there any heat source in your room?
In case anyof the followingsituations happen, pleaseimmediately stop all
operations and cut off the power supply, then contact with service centre .
The fuse andswitch often breaks.
Carelessly splash water or something into air conditioner.
Unusual noise can be heard during operation.
Electrical wiring andpower plug arevery hot.
Wind blowing from the outlet smells terrible during operation.
The Run light or other display flashes rapidly and keeps flashing after repluging.
7 24

1.The installation must be done by a professional referring to the Installation
instructions .
2.The wiring mustbe done bya qualified electricianaccording to theelectrical safety
requirements.
3.The customer should have a qualified power supply which coincides with the tag of
air conditioner, the normal voltage should be in the range of 90-110% of its rated
voltage.
4.The air conditionermust be wellgrounded, the switchof the main power of air-
conditioner must be reliably grounded.
5. n all-pole switch
must be installed in the fixedwiring and thedistance between contactsshould be
no less than 3.0 mm.
6.
leakage protector must be installed in the
fixed wiring.
7.The power supply circuit should have leakage protector and air switch of which the
capacity should be more than 1.5times of themaximum current.
If your air conditioner is not fitted with a supply cord and a plug, a
If your air conditioner ispermanently connected tothe fixed wiring and have a
leakage current that may exceed 10mA,
Guide for customer
Notices
1.The air conditioner must be installed on well strong supporter.
2.The appliance shall be installed in accordance with national wiring regulations.
3.Fix the machine firmly, otherwise it will produce abnormal noise and vibration.
4.Install the outdoor unit in the place where it wouldn t disturb your neighbour.
5.The method of connection of the appliance to the electrical supply and inter
connection of separate somponents, please see the electric connection
elements shart which stick on the machine.
6.Is the power supply cord is damaged, it must be replaced by the manufacture
or its service agent or a similar qualified person.
7.After installation, the power plug should be easily reached.
Installation Guide
,
8
11
23

Buttons description
SET TEMPERATURE( )
SET
ON/OFF
MODE
CLEAN SPEED
SLEEP
FRESH
STRONG
SWING DUST FEELING
HEALTH
FUNGUSPROOF
SCREEN TIMER
AUTO FAN
COOL HIGH
DRY MID
HEAT LOW
1
9
11
13
3
2
4
5
6
7
8
15
14
12
10
1. ON/OFF button
You can start the air-conditioner by pressing this button
and stop its operation by pressing it again.
2. FRESH button
3. SPEED button
You can select fan speed show as the follow:
High
Low Auto
Med
FEELING
TIMER
SPEED
TRANSMIT ON/OFF
ROOM
SET
TIMER ON OFF
DIGITAL
RUNNING
MODE
RUNNING
MODE
LCD displays instruction
ON/OFF display:
when the remote controller is
on state, the LCD will display
otherwise will not display.
Digital display:
Under normal operation,it
display set temperature,
while starting,it will display
room temperature, and on time
mode,it will display set timer.
This button is invalidation.
4. STRONG button
Only under the state of cooling or heating mode, press this
button, the fan speed is adjusted to strong automatically and
the LCD displays high fan , the strong function is
started to reach the highest cooling or heating.
9 22

Press this button can be used to set the feeling function.
The LCD shows the actual room temperature when the
function set and it shows the setting temperature when the
function cancelled. This function is invalid when the
appliance at the Fan mode.
5. FEELING button
When it displays FEELING button:
6. DUST button
7. TIMER button
This button is invalidation.
Setting the ON timer time
a. When remote controller is at off state, press TIMER
button, the LCD displays TIMER ON and the timer
time, the range of setting time is 0.5h to 24h.
b. You can press the or button to adjust the
timer time, each touch will be set time to increase or
reduce 0.5h before 10 hours ago, after ten hours will be
set time to increase or reduce 1h per pressing, to enables
your required timer.
c. Press TIMER button again, to set the timer on function.
d. You can set another function to insure the suitable state
after air conditioner turn on (including mode, temperature,
swing, fan speed and etc). The LCD will displays all your
setting and keep it, when the timer reach to the set time,
the air conditioner will be working according to your set
automatically.
Setting the OFF timer time
a. When remote controller is at on state, press TIMER
button, the LCD displays TIMER OFF and the timer
time, the range of setting time is 0.5h to 24h.
b. You can press the or button to adjust the
timer time, each touch will be set time to increase or
reduce 0.5h before 10 hours ago, after ten hours will be
set time to increase or reduce 1h per pressing, to enables
your required timer.
c. Press TIMER button again, to set the timer off function.
8. SCREEN button
You can let the LCD displays working or not by pressing this
button.
10
21

Press the
16 to 32 ,Display will change as you touch
the button.
+ or - button,you can set the temperature
range from
9. or button
10. CLEAN button
a. When remote controller is at the off state, press clean
button, the wind guiding bars turn to initial postions for
cooling, the A/C runs clean function with max duration
35mins.The purpose of its function is to clean dust on
evaporator and dry the inside water of evaporator and
to prevent the evaporator going moldy due to water
deposition and boasting strange smell.
b. After setting clean function, press clean button
again to cancel clean function or press ON/OFF
button to cancel clean function and start A/C.
c. The clean function will not work after 35 minutes
running working without any operation.
Note: clean function can be set in parallel with
time start function; in this case , time start
function will be executed after clean function.
11. MODE button
AUTO COOL DRY HEAT FAN AUTO
Remark: cold wind type has no heating function.
Which enables you to select different operation mode,
after each pressing, the operation mode will be changed. It
shows in the following display.
12. SLEEP button
1.press the SLEEP button, the sleeping indicator light of
indoor unit flashes on.
2.after the setting of sleeping mode, the cooling operation
enables the set temperature to increase 1 after 1hour
and another 1 automatically after 1 hour.
3.after the setting of sleeping mode, the heating operation
enables the set temperature to drop 2 after 1hour and
another 2 automatically after 1 hour.
4.the air-conditioner runs in sleeping mode for 7 hours and
stops automatically.
Remark: press the MODE or ON/OFF button, the remote
controller clears sleeping mode away.
11 20

13. SWING button
Press this button, the horizontal wind direction vanes can
rotate automatically, when you have the desired vertical
wind direction, press it again, the horizontal wind direction
vanes will be stopped at the situation of your choice.
14. HEALTH button
Press this button, you can turn on or off the health function.
15. FUNGUSPROOF button
This A/C has special dry and anti-mold function which
has yes two selections. This function is
controlled by the remote controller under cooling, dry and
auto (cooling and dry) modes, the horizontal wind guiding
bars are at the initial position for cooling. The A/C runs
under heating mode(the cooling only A/C only runs under
fan mode), the internal fan runs for three minutes with weak
wind before stop. The purpose of this function is to dry the
inside of the evaporator and to prevent the evaporator from
going mouldy due to water deposition and thus dispersing
strange smell.
or no
Note:
1.This function has not been set in the factory. You may
freely set and cancel this function. The setting method
is: under off status of the A/C and the remote
controller, point the remote controller toward the A/C
and continuously press pushbutton
for one time, the buzzer keep beeps five times again
after five times beeps, indicating that this function is
ready. In case this function has been set, unless the
whole A/C is powered off or the function is manually
cancelled, the A/C then has this function as a default;
2.Tocancel the function: 1. Power off the whole A/C; 2.
Under off status of the A/C and the remote
controller, point the remote controller toward the A/C
and continuously press pushbutton
for one time, the buzzer keep beeps three times again
after five times beeps, indicating that this function has
been cancelled;
3.When this function is on, it is suggested not to restart
the A/C before it is completely stop;
4.This function will not run in case of time stop or sleep
stop.
FUNGUSPROOF
FUNGUSPROOF
12
19

Fix batteries
1.Slide open the cover according the direction indicated
by arrowhead.
2.Put into two brand new batteries (7#), position the
batteries to right electric poles (+ -).
3.Put back the cover.
Automatic operation mode
1.Press the MODE button, select the automatic operation
mode.
2.Press the SPEED button, you can select fan speed.
You can select fan speed from LOW, MID, HIGH, AUTO.
3.Press the ON/OFF button, the operation indicator is on,
the air-conditioner starts to operate the automatic mode.
Press the button again, the air-conditioner stops.
Cooling/Heating operation mode
(cold wind type has no heating function)
1.Press the MODE button, select the Cooling or Heating
operation mode.
2.Press the or button, set the temperature,
temperature can be set at 1 difference range from
16-32 .
3.Press the SPEED button, you can select fan speed.
You can select fan speed from LOW, MID, HIGH, AUTO.
4.Press the ON/OFF button, the operation indicator is on,
the air-conditioner starts to operate the automatic mode.
Press the button again, the air-conditioner stops.
Usage
13 18

Fan operation mode
Drying operation mode
1.Press the MODE button, select the Cooling or Heating
operation mode.
2.Press the SPEED button, you can select fan speed.
You can select fan speed from LOW, MID, HIGH.
3.Press the ON/OFF button, the operation indicator is on,
the air-conditioner starts to operate the automatic mode.
Press the button again, the air-conditioner stops.
Remark: In the circulation operation mode, to set the
temperature is noneffective.
1.Press the MODE button, select the Dry operation mode.
2.Press the or button, set the temperature,
temperature can be set at 1 difference range from
16-32 .
3.Press the SPEED button, you can select fan speed.
You can select fan speed from LOW, MID, HIGH, AUTO.
4.Press the ON/OFF button, the operation indicator is on,
the air-conditioner starts to operate the automatic mode.
Press the button again, the air-conditioner stops.
Night Luminous Function of Remote
Controller(Only the remote controller with
this function can be used)
For your convenient use of the remote controller in the
darkness without any lighting, this remote controller has
blue background light and luminous pushbuttons. Function
at you press on any of the pushbutton, the background light
will immediately release soft light so that you are easy to
operate the remote controller. If you do not operate the
controller within 10 seconds, the background light will
automatically disappear.
Note:
All the figures above are the displays after being
initially electrified or re-electrified after power off. In
actual operations, the remote controller screen
displays related items only.
14
17

1.Aim the remote controller towards the receiver on the air-
conditioner.
2.The remote controller should be within 8 meters away
from the receiver.
3.No obstacles between the remote controller and receiver.
4.Do not drop or throw the remote controller.
5.Do not put the remote controller under the forceful
sunrays or heating facilities and other heating sources.
6.Use two 7# batteries, do not use the electric batteries.
7.Take the batteries out of remote controller before stop its
using for long.
8.When the noise of transmitting signal can t be heard
indoor unit or the transmission symbol on the display
screen doesn t flare, batteries need be replaced.
9.If reset phenomenon occurs on pressing the button of the
remote controller, the electric quantity is deficient and
new batteries need to be substituted.
10.The waste battery should be disposed properly.
Attention
15
17
17
17
18
18
18
19
19
19
20
21
21
22
24
24
25
25
25
18
Funcionamiento
25
26
30
30
30
31
31
31
32
30