Prestigio GEOVISION 5055 User manual

GEOVISION 5055
You may find detailed warranty information at: www.prestigio.com/support/warranty-terms.
© Copyright 2015 Prestigio. All rights reserved.

www.prestigio.com
Unboxing
Inside your package
• Prestigio GPS
• Mounting cradle
• Car charger
• USB cable
• Quick start guide
• Warranty card
Your device at a glance
RESET
1
2
3
4
5
6
1. Power button
2. Earphone jack
3. SD card slot
4. Mini USB port
5. Reset button
6. Speaker
Inside your package
Your device at a glance

www.prestigio.com
Getting started
Install memory card
Mount your device
Charge the battery
Power on your device
Mount your device
1. Install the bracket to mounting cradle.
2. Remove the protection plastic film from
the suction cup, and position it on the clean
windshield or dashboard.
3. Hold firmly against the surface and lock the
suction cup lever. The mount will suction and
stick firmly onto the surface.
4. Lock device on the bracket with bottom on the
appropriate socket.
5. Rotate the knob to adjust device to desired
viewing angle.
Make sure that the device has a clear
view of sky to attain best GPS reception.
Congratulations on your purchase and welcome to
Prestigio. To get the most from your product and
enjoy all that Prestigio has to offer, please visit:
http://www.prestigio.com/catalogue/Navigators
For more details about your product, please visit:
www.prestigio.com/support
Install memory card
Before power on, please insert a microSD card (not
included) into the slot until it locks in place.
The device will automatically recognize
it as default storage, and save mapping
data or user’s music, photo or video on
this card.

www.prestigio.com
Install memory card
Mount your device
Charge the battery
Power on your device
• Please fully charge the battery (for
at least 8 hours) before initial use.
The battery status indicator glows in
red color when charging, and turns
bright amber color when charging is
complete.
• Charging time is approximately 2
hours after initial use.
• It is not necessary to start charging
the device before the battery is fully
discharged.
Power on your device
Press and hold the power button to turn on your
device.
To turn it off, press and hold the power
button, and and then tap power icon on
the pop-up screen.
Dismount your device
1. Push the tap on top of the mounting cradle to
release the device.
2. Lift the suction cup lever to easily remove the
suction cup from windshield or dashboard.
Charge the battery
• Using the car charger: after vehicle engine is
started, charge the device through vehicle 12V
cigarette lighter, to protect the device from
sudden surges in current.
• Using mini USB cable: connect the device to AC
adapter or the USB port of a computer.

www.prestigio.com
Maps & navigation
Program interface
Routing
Some additional features
4 Information
panel
The sign shows the upcoming
maneuver (for example, turning)
and distance to the maneuver.
Tapping on the sign opens the
menu containing route options,
for instance an option which
allows stopping route guidance.
5 Route Visualization of a current route.
6 Information
panel
The panel shows current speed,
the remaining time to the
destination point,
distance to the destination point,
and estimated arrival time.
7 GPS-cursor Indication of a current position on
the map, when the GPS receiver is
switched on.
8 Menu Tapping on the button opens the
main program menu.
9 Information
panel
The panel shows the name of
the street you are currently
driving along. The information is
available only if GPS/GLONASS
connection is established and the
map contains such information.
If there is no street name, the
direction will be displayed.
Program interface
2
4
5
6
8
11
12
14
15
7
3
10
116 13
9
№Name Function
1 Sound Tapping on the button opens the
sound menu.
2 Compass Tapping on the button opens the
context menu, which controls
options of map orientation
("North up" – the map will
always be oriented northwards,
"Track up" – the map will always
be oriented in the direction of
movement along the route), type
of map view (Plain view "2D",
Panoramic view "3D") and skins
("Night skin", "Day skin", "Auto").
3 Road lanes The sign displays road lanes with
possible maneuvers.

www.prestigio.com
Program interface
Routing
Some additional features
16 "Navitel.
Friends"*
The icon of the “Navitel.Friends”
service, tapping on which opens
its menu. The service is intended
for adding friends, viewing
their location and exchanging
messages with them.
10 Scale
button
Zoom out button.
11 Scale
button
Zoom in button.
12 "Navitel.
Events"*
Button for controlling the
“Navitel.Events” service.
13 Route
progress
bar
The progress bar displays the
remaining route, waypoints (if
any) and traffic density on the
route marked by color.
14 Battery The icon indicates the level of
battery charge. Tapping on the
icon shows free device memory.
15 GPS GPS-connection indicator. Grey
indicator – GPS/GLONASS-
receiver is off; red – receiver
is turned on, but there is no
connection with satellites;
yellow – bad connection; green
– connection is established. The
number in the icon indicates the
number of satellites.

www.prestigio.com
Program interface
Routing
Some additional features
21 Updates
*
Provides access to the program and
map update menu screen.
22 Track
recording
Button for track recording: red dot–
recording is on, grey dot – recording
is stopped.
23 Navitel.
Traffic*
The icon displays general traffic
intensity on ten-point scale. Tapping
on the button shows the menu for
controlling the “Navitel.Traffic”
service.
24 Navitel.
SMS*
The icon allows reading/sending
messages and using coordinates in
them. It also shows the number of
unread messages.
18
17
20
22
23
24 21
19
№Name Function
17 "Cursor"
button
Tapping on the button shows the
menu for operations with the
point marked on the map (making
it a destination point by pressing
"Go!" button or proceeding to the
properties screen.
18 "Save
WP"
button
Saves the point marked on the map
as a waypoint.
19 2D/3D Switching between the plain 2D and
the panoramic 3D map formats.
20 Point on
the map
Short tap on the map marks the
point for further operations with it:
saving as a waypoint, adding to the
route or viewing the object’s data,
and others.

www.prestigio.com
Program interface
Routing
Some additional features
28 "Route
through"
The button is active only when
there is an existing route. Pressing
the button marks the selected
point as a point to be included in
the route. The last added point
becomes the first one in the route
after the starting point.
29 Map Back to map.
* – functionality is available only for devices, having
access to the Internet.
25
28
26 27
29
№Name Function
25 "Go!" Tapping on the button gives a
command to the program to
calculate a route from the current
position or the set initial point to
the selected point.
26 "Set start" Tapping on the button determines
the selected point as a starting
point of the route (GPS-receiver
must be switched off).
27 "Set finish" The button is active only when
there is an existing route. Pressing
the button continues the route up
to the selected point making it the
destination point of the route.

www.prestigio.com
Program interface
Routing
Some additional features
Route to an address
To have a route calculated to a point of a known
address, press "Menu" in the bottom left corner of
the screen [1] → "Find" [2] → "By address", then
press "Select country" [3] and start entering the
name of a country [4]. Press the icon in the upper
right part of the screen to hide the keyboard. Select
the country [5]. "Select city", "Select street" and
"Select building" become active only if the previous
fields were filled out [6]. When all information is
entered the object will be shown in the screen [7].
Press "Go!". The program will automatically plan
a route from a current location to the indicated
address [8]. Now you can follow the route [9].
Fig.1 Fig.2
Fig.3 Fig.4
Routing
Route to a point selected on the map
You can have a route planned to a point, which
can be found and marked on the map and then set
as the destination, while current position of the
device, determined by the GPS system becomes the
starting point. To plan a route press on the map to
mark the point, select "Cursor" [1] and then "Go!"
[2]. The route will be displayed on the map [3].
Fig.1
Fig.1 Fig.2
Fig.3

www.prestigio.com
Program interface
Routing
Some additional features
the map: tap on the map to mark the point, press
"Cursor" [4] and then press "Go!" in the "My route"
screen [5]. The program will automatically plan a
route [6].
Fig.1 Fig.2
Fig.3 Fig.4
Fig.5 Fig.6
Fig.5 Fig.6
Fig.7 Fig.8
Fig.9
Manual setting of all route points
To plan a route, where the starting and the
destination points are determined manually, first
mark a point on the map where you plan to start
and press "Cursor" [1] to proceed to the "My
route" screen. Tap on the information panel at the
bottom of the screen [2]. Press "Set start" in the
"Properties" screen [3]. The GPS-receiver must be
switched off. The point will be marked on the map
as a starting point. Select a destination point on

www.prestigio.com
Program interface
Routing
Some additional features
Navitel. Friends
The "Navitel.Friends" interactive service allows
viewing positions of friends on the map in real-time
mode, to plan a route, using their coordinates, to
share coordinates of other points and exchange
messages. To turn the service on select "Menu" →
"Settings" → "Online services" and set the switch in
the "Turn on Navitel.Friends" field to "On" position.
Fig.1
Some additional features
For those devices which support Internet
connection, various NAVITEL® online services,
including "Navitel.Traffic" and "Navitel.Friends" are
available.
Navitel.Traffic
The service provides and displays real-time
information about density of traffic on the map.
If a part of a road is marked green on the map
this means that road traffic here is normal, if it is
marked yellow – traffic is rather dense, orange –
traffic is heavy, red – there is a traffic jam [1]. To set
the service select "Menu" → "Settings" → "Online
services".
Fig.1

www.prestigio.com
Specifications
MSB2531A Cortex A7,
800 MHz
RAM 128 MB + 4 GB Flash
Micro SDHC/SDXC ≤ 32GB
5” touch LCD, 480*272
1050 mAh
137.5*88.5*12.5 mm (H*W*D)
170 g

www.prestigio.com
Troubleshooting
vehicle, you can use the external GPS antenna
to solve this problem.
Theunitcanreceivesignalsnowbutcan’tthen;
signalsreceivedarenotstable.
-Use the adaptor to supply power or charge the
battery.
-Remove the veil.
-Avoid great swing of the unit.
Take steps described in the tables below to solve
simple problems before contacting customer
service.
Immediately turn off the device and
disconnect the power adapter if the
device is not working properly. Never
try to repair the unit without authorized
professionals for it may damage the
unit.
Userscan’tturnontheunit.
-Connect the adaptor correctly.
-Use the adaptor to supply power or charge the
battery.
Thereisnosound.
-Turn up the volume or turn on the sound
output.
Thereisnopicture.
-Adjust the brightness of the LCD.
Theunitcan’treceivesatellitesignalsorcan’t
orient.
-Make sure to use the unit out of room; if in the

www.prestigio.com
Safety instructions
• To reduce the risk of electric shock, do not
remove the cover (or back). Only PRESTIGIO
certified technicians are qualified to repair your
device.
• The manufacturer should not hold responsibility
for the damage caused by any substitutions
and modifications of the product without
authorization from the manufacturer or
authorized unit.
• To prevent fire or shock hazard, do not expose
your device to rain or moisture.
• Do not put, store or leave your device near heat
sources, in direct strong sunlight, or in a high
temperature location.
• Maintain well-ventilated conditions around the
unit to avoid overheating.
• Operating temperature: -20°C to 60°C.