Prestigio GeoVision 4466 User manual

EN-1
1. Important safety instructions ………………………………..…...
2. Accessories ………………………………………………………….
3. View of main unit …………………….……………………………...
4. Device connections ……………………….…………....................
5. Cautions on battery charging ………….……………..................
6. Getting started ………………………………………………………
7. Device Settings…………………………………………..…………..
8. Bluetooth Function …………………………….…………………...
9. FM Function ………………………...…………………....................
10. Programme Interface………...……………….…….......................
11. Autorouting …..……………………………....................................
12. Additional Features…………………………………………………
13. Troubleshooting …………………………………………………….
2
3
4
6
8
9
10
11
15
16
20
22
23
Contents
EN

EN-2
CAUTION
1. To reduce the risk of electric shock, do not remove the cover (or back). No
user-serviceable parts inside. Refer servicing to qualified service personnel.
2. The manufacturer should not hold responsibility for the damage caused by any
substitutions and modifications of the product without authorization from the
manufacturer or authorized unit.
WARNING
The device should not be exposed to dripping or splashing and no objects filled with
liquids should be placed on the device.
Important Safety
Instructions
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
EN

EN-3
Prestigio GeoVision 4466/5466/5466BTFM–Accessories List
ITEM NAME QTY
Car Charger 1
USB Cable 1
Stylus Pen 1
User Manual 1
Warranty Card 1
Driver/Document CD 1
Mounting Cradle
Accessories
EN
1

EN-4
Prestigio GeoVision 4466/5466/5466BTFM
Front and Side View
1. LCD Touch Screen
Tap the screen with touch pen or finger to select menu commands or to enter
information.
2. Battery Status Indicator
The indicator glows in bright green color when battery is fully charged and in red
color when charging.
3. Earphone Jack
Connects to earphones or headsets.
4. microSD Slot
Receiving microSD memory card for data access or memory expansion.
5. mini USB Port
Connection to USB Cable for data access or battery charging
6. Microphone
Records sound.
View of Main Unit
1
4
3
5
6
2
EN

EN-5
Prestigio GeoVision 4466/5466/5466BTFM
Rear and Top View
1. Speaker
Emits sound, voice or music.
2. Reset Button
Press to reboot the device.
3. Light Sensor
Adjust the brightness of touch screen
4. Power Button
Press to power the device ON/OFF.
View of Main Unit
1
4
2
3
EN

EN-6
Inserting microSD Card
zTo insert a microSD card, place the
connector towards the device and the
card label towards the front side of
the device.
zTo remove a microSD card, gently
press the edge of the card to release
the safety lock and pull the card out
of the slot.
NOTE:
Please always make sure that no application is accessing the microSD
card before extraction.
Connecting to External USB Device (Charging)
zInsert the USB connector into the
appropriate USB port.
zInsert the other USB connector into
the USB port on PC to start charging.
Device Connections
EN

EN-7
Connecting to Car Charger
zInsert the USB connector into the
appropriate USB port.
zInsert car charger connector into
vehicle 12V accessory/cigarette
socket to start charging.
NOTE:
Please connect the car charger to vehicle 12V accessory/cigarette
socket after the vehicle engine is started to protect the device from
sudden surges in current.
Device Connections
EN

EN-8
About Rechargeable Battery
The device is equipped with a built-in rechargeable battery. Please fully charge the
battery (for at least 5 hours) before initial use. The battery status indicator glows in red
color when charging and turns bright green color when charging is complete. Charging
time is approximately 4 hours.
Working conditions and precautions for the rechargeable battery
zDevices with new batteries should be fully charged before initial use.
zIt is not necessary to start charging the device before the battery is fully
discharged.
Cautions on Battery
Char
g
in
g
EN

EN-9
1. Press and hold Power Button to turn
on the device.
2. Shortly after the greeting screen is
shown, the main menu will be
displayed.
3. Tap the corresponding buttons with
touch pen included to navigate
through various functions.
4. Press and hold Power Button to turn
the device off or to allow the device to
enter sleep mode.
5. Tap Sleep icon to put the device to
sleep mode or Power Off icon to turn
the device off.
Getting Started
EN

EN-10
zIn the main menu, tap on to
enter the device settings.
zTap to display other settings.
Volume Adjust sound volume, mute device, or enable warning messages.
Backlight Adjust the brightness of touch screen, enable/disable auto
backlight.
Language Select desired language.
DateTime Set up Time Zone/Date/Time.
Calibration Calibrate the screen when position deviation occurs.
FM transmitter Transmit audio signals from the navigator to radio sets.
USB Set the data transmission mode between the navigator and
computer.
Factory Reset Restore all system settings to factory default values.
Device Settings
EN