Prestigio GEOVISION 5055 User manual

GEOVISION 5055
You may find detailed warranty information at: www.prestigio.com/support/warranty-terms.
© Copyright 2015 Prestigio. All rights reserved.

www.prestigio.com
Unboxing
Inside your package
• Prestigio GPS
• Mounting cradle
• Car charger
• USB cable
• Quick start guide
• Warranty card
Your device at a glance
RESET
1
2
3
4
5
6
1. Power button
2. Earphone jack
3. SD card slot
4. Mini USB port
5. Reset button
6. Speaker
Inside your package
Your device at a glance

www.prestigio.com
Getting started
Install memory card
Mount your device
Charge the battery
Power on your device
Mount your device
1. Install the bracket to mounting cradle.
2. Remove the protection plastic film from
the suction cup, and position it on the clean
windshield or dashboard.
3. Hold firmly against the surface and lock the
suction cup lever. The mount will suction and
stick firmly onto the surface.
4. Lock device on the bracket with bottom on the
appropriate socket.
5. Rotate the knob to adjust device to desired
viewing angle.
Make sure that the device has a clear
view of sky to attain best GPS reception.
Congratulations on your purchase and welcome to
Prestigio. To get the most from your product and
enjoy all that Prestigio has to offer, please visit:
http://www.prestigio.com/catalogue/Navigators
For more details about your product, please visit:
www.prestigio.com/support
Install memory card
Before power on, please insert a microSD card (not
included) into the slot until it locks in place.
The device will automatically recognize
it as default storage, and save mapping
data or user’s music, photo or video on
this card.

www.prestigio.com
Install memory card
Mount your device
Charge the battery
Power on your device
• Please fully charge the battery (for
at least 8 hours) before initial use.
The battery status indicator glows in
red color when charging, and turns
bright amber color when charging is
complete.
• Charging time is approximately 2
hours after initial use.
• It is not necessary to start charging
the device before the battery is fully
discharged.
Power on your device
Press and hold the power button to turn on your
device.
To turn it off, press and hold the power
button, and and then tap power icon on
the pop-up screen.
Dismount your device
1. Push the tap on top of the mounting cradle to
release the device.
2. Lift the suction cup lever to easily remove the
suction cup from windshield or dashboard.
Charge the battery
• Using the car charger: after vehicle engine is
started, charge the device through vehicle 12V
cigarette lighter, to protect the device from
sudden surges in current.
• Using mini USB cable: connect the device to AC
adapter or the USB port of a computer.

www.prestigio.com
Maps & navigation
GPS modes
Navigation menu
Navigation
Map screen
• Advanced mode: you have access to the full
functionality of Prestigio GeoVision.
This manual covers actions in Simple mode.
Later you can switch between the two operating
modes:
• To switch from Simple mode to Advanced
mode: on the startup screen (Navigation
Menu), tap Settings > Advancedmode.
• To switch from Advanced mode to Simple
mode: on the startup screen (Navigation
Menu), tap Settings > Simplemode.
GPS modes
When Prestigio GeoVision is started the first time,
you need to select whether to start the program in
Simple mode or in Advanced mode.
The two operating modes of Prestigio GeoVision
mainly differ in the menu structure and the number
of available features. The controls and screen
layouts are the same.
• Simple mode: you have easy access to the most
important navigation functions and the basic
settings only. The rest of the settings are set to
values that are optimal for typical use.

www.prestigio.com
GPS modes
Navigation menu
Navigation
Map screen
destinations.
• Tap Map to navigate or to browse the map.
• Tap Settings to customise the way Prestigio
GeoVision works.
• Tap Exit to stop navigation, and exit Prestigio
GeoVision.
Navigation menu
After selecting Simple mode, the Navigation menu
appears. From here you can reach all parts of
Prestigio GeoVision.
The Navigation menu contains the following
options:
• Tap FindAddress to specify an address as your
destination.
• Tap Historyfor the list of recent destinations.
• TapFindPOI to select one of the stored Points
of Interest.
• Tap Favourites for the list of your favourite

www.prestigio.com
GPS modes
Navigation menu
Navigation
Map screen
state, tap Cityname.
2. Start entering the settlement name on the
keyboard.
3. Get to the list of search results:
• After entering a couple of characters, the
names that match the string appear in a list.
• Tap Done to open the list of results before it
appears automatically.
4. Pick the settlement from the list.
Navigation
In the Navigation menu, tap FindAddress.
By default, Prestigio GeoVision proposes the
country/state and settlement where you are.
If needed, tap the button with the name of the
country/state, and select a different one from the
list. If needed, change the settlement:
• To select the settlement from the list of recently
used ones, tap the button.
• To enter a new settlement:
1. Tap the button with the name of the
settlement, or if you have changed the country/

www.prestigio.com
GPS modes
Navigation menu
Navigation
Map screen
3. Tap Done to finish entering the address.
The map appears with the selected point in the
middle. Tap Navigateto from the Cursor menu. The
route is then automatically calculated, and you can
start navigating.
Enter the street name:
1. Tap Streetname.
2. Start entering the street name on the keyboard.
3. Get to the list of results:
• After entering a couple of characters, the names
that match the string appear in a list.
• Tap Done to open the list of results before it
appears automatically.
4. Pick the street from the list.
Enter the house number:
1. Tap Housenumber.
2. Enter the house number on the keyboard.

www.prestigio.com
GPS modes
Navigation menu
Navigation
Map screen
detour it means from the active route. This
can be useful if you search for a later stopover
that causes only a minimal detour. For example
upcoming petrol stations or restaurants.After
this, the list of POI categories appear.
On the Map screen, tap Menu to return to the
Navigation menu.
In the Navigation menu, tap FindPOI.
Select the area around which the POI should be
searched:
• Aroundaddress: The POI will be searched
around a given address.
• Aroundcursor: The POI will be searched around
the Cursor.
• AroundGPSposition: The POI will be searched
around the current GPS position.
• Arounddestination: The POI will be searched
around the destination of the active route.
• Alongroute: The POI will be searched not
around a given point but by the size of the

www.prestigio.com
GPS modes
Navigation menu
Navigation
Map screen
route is then automatically calculated, and you can
start navigating.
You can narrow the search with the following:
• Select the POI group (e.g. Accommodation), and
after that, if needed, select the POI subgroup
(e.g. Hotel or Motel).
• To find the POI by its name, tap Search, and use
the keyboard to enter a part of the name.
• To list all POIs in a given POI group, press
Search, and then Done without entering any
letters of its name.
[optional] When finally the list of results appear,
you can change the list order with the Orderby
nameor Orderbydetourbutton.
Tap the desired POI in the list.
The map appears with the selected point in the
middle. Tap Navigateto from the Cursor menu. The

www.prestigio.com
GPS modes
Navigation menu
Navigation
Map screen
2D or3D: Switches between 2D (classic top-down
view) and 3D (perspective view for navigation) map
modes.
Menu: Opens the Navigation menu.
If you have moved the map, a button appears.
Tap this button to move the map back to the
current GPS position.
Map screen
The most important and most often used screen
of Prestigio GeoVision is the Map screen. The map
looks similar to a conventional road-map. The blue
arrow represents your current position, and the
green line shows the recommended route.
There are several screen buttons and data fields on
the screen to help you navigate. Their functions are
explained in detail in the User Manual.
During navigation, the screen shows route
information and trip data (left screenshot),
but when you tap the map, additional buttons
and controls appear for a few seconds (right
screenshot). Most parts of the screen behave as
buttons.

www.prestigio.com
Specifications
MSB2531A Cortex A7,
800 MHz
RAM 128 MB + 4 GB Flash
Micro SDHC/SDXC ≤ 32GB
5” touch LCD, 480*272
1050 mAh
137.5*88.5*12.5 mm (H*W*D)
170 g

www.prestigio.com
Troubleshooting
vehicle, you can use the external GPS antenna
to solve this problem.
Theunitcanreceivesignalsnowbutcan’tthen;
signalsreceivedarenotstable.
-Use the adaptor to supply power or charge the
battery.
-Remove the veil.
-Avoid great swing of the unit.
Take steps described in the tables below to solve
simple problems before contacting customer
service.
Immediately turn off the device and
disconnect the power adapter if the
device is not working properly. Never
try to repair the unit without authorized
professionals for it may damage the
unit.
Userscan’tturnontheunit.
-Connect the adaptor correctly.
-Use the adaptor to supply power or charge the
battery.
Thereisnosound.
-Turn up the volume or turn on the sound
output.
Thereisnopicture.
-Adjust the brightness of the LCD.
Theunitcan’treceivesatellitesignalsorcan’t
orient.
-Make sure to use the unit out of room; if in the

www.prestigio.com
Safety instructions
• To reduce the risk of electric shock, do not
remove the cover (or back). Only PRESTIGIO
certified technicians are qualified to repair your
device.
• The manufacturer should not hold responsibility
for the damage caused by any substitutions
and modifications of the product without
authorization from the manufacturer or
authorized unit.
• To prevent fire or shock hazard, do not expose
your device to rain or moisture.
• Do not put, store or leave your device near heat
sources, in direct strong sunlight, or in a high
temperature location.
• Maintain well-ventilated conditions around the
unit to avoid overheating.
• Operating temperature: -20°C to 60°C.