Prevue Hendryx 91340 User manual

CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL customerservice @ prevuepet.com
1804 +91340—03/20—A4 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • 1 [312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
91340
Instructions online at www.prevuepet.com
MODEL # Flight Cage
ASSEMBLY
1PIECES
2PIECES
1
2
3
4
5
Place the removable grille
into the base.
Slide the removable
tray into the opening.
Add the back panel to the 3-panel
mesh. Start at the bottom and
weave the alternating hooks
together up the seam.
Done correctly, the seam will
look like this →
Weave the panels together
on the remaining seam by the
same method.
Add the assembled mesh to the
base, by inserting the extended
loops along the sides into the open
slots on the base.
Along the front and back edges,
set the mesh between the raised
tabs and the rim.
18041804
MODEL #

1804 +91340—03/20—A4 For more wonderful cages, toys, and accessories for cats, irds, chickens, ra its, ferrets, dogs and small animals, visit www.prevuepet.com
*CLEANING INSTR CTIONS
To prolong the life of your new
Prevue Pet Products cage, we recommend:
→When cleaning the cage and parts, use a
soft cloth or non-abrasive scrub pad (such
as Prevue’s Cage Saver (#109)).
→Wash all parts with warm water and a mild
environmentally friendly, pet-safe soap.
→Rinse thoroughly.
→Hand dry all parts completely with a soft dry
cotton cloth before reassembling the cage.
→Do not leave plastic parts in the sun to dry
as they may warp.
3PIECES
Starting on one end, catch the roof
on the looped hooks along the side,
then along the front and back panels,
and finish with the hooks on the
opposite end.
Assembly completed. {
Install the perches on
horizontal wires at an
equal height.
Assemble the
two-piece cups,
slide the cup doors
up and insert the
cups into place.