Prevue Hendryx Hampton Deluxe F070 User manual

F070—03/23—A4A M de in Chin for Prevue Pet Products, Inc., 224 N M plewood Ave, Chic go IL 60612 USA • www.prevuepet.com • 1 [312] 243-3624 • customerservice @ prevuepet.com
]C7
]C6
]C5
]B2
]B1
]F1
]F2
]L1
]L2
]R2
]R1]C4
]C3
]C2
]C1
]T
]G
]T
]G
]D
Hex Screw
26 pcs +1
Corner Bracket
4 pcs
Endcap
4 pcs
Allen wrench
1 pcs
Plastic Connector
4 pcs
Rolling Caster
2 pcs
Locking Caster
2 pcs
HARDWARE
INCLUDED:
KEY:
B= BACK Panel
R=RIGHT Side Panel
C=CORE Center Parts
F=FRONT Panel
L=LEFT Side Panel
G=GRILLE
T=TRAY
D=DI IDER
CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL [e-mail]
Hampton Deluxe
Divided Breeding Cage w/Stand
PARTS LIST
Instructions online at www.prevuepet.com
F070
MODEL #
These parts are
interchangeable:
F1 = B1
L1 = R1
L2 = R2
C2 = C3
C4 = C5 = C6
Gs are the same
Ts are the same
⁕
CUPS
PERCHES
PERCHES
CUPS

CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Pro ucts:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL [e-mail]
F070—03/23—A4.1 Made in China for Prevue Pet Produ ts, In ., 224 N Maplewood Ave, Chi ago IL 60612 USA • 1 [312] 243-3624 • www.prevuepet. om • ustomerservi e @ prevuepet. om
1PIECES
interchangeable
interchangeable
Ha pton Deluxe
Divided Breeding Cage w/Stand
ASSEMBLY
Instructions online at www.prevuepet.com
F070
MODEL #
Insert the plasti onne tors into the
top of the stan frames.
Align the bottom hole of the connector
with the hole on the frame leg.
1
Han -tighten the hex screws
at the top to attach stan frame
sides to the front an ba k
frames.
Leave screws LOOSE for the
next step.
2
Insert the exten e wires of
the storage shelf into the holes
along the insi e lower rails of
the front an back frames.
Finish the stan assembly with
han -tightene hex screws at
the bottom corners, an then
tighten ALL screws with the hex
key.
3
Insert asters into the base of
the frame legs. Position the
two lo king asters where you
fin them best suite for your
expecte use.
INSTALLATION TIP :
Use the allen wrench to keep the plastic
connector from going too deeply into
the frame, and to align the holes in the
post and frame.
]B1
]C1
]L1
]R1
]F1
x 8x 4
1
2
3
CASTERS

C6
F070—03/23—A4.2 For more wonderful ages, toys, and a essories for ats, birds, hi kens, rabbits, ferrets, dogs and small animals, visit www.prevuepet. om
2PIECES
3PIECES
]L2 and R2
are interchangeable
]C4 ]C5 and C6
are interchangeable
]C2 and C3
are interchangeable
]B2
]L2
]R2
]F2
x 8
x 10
NOTE : For Step 2 and 3, the cage body will be a embled UPSIDE DOWN for ea e of a embly.
Grille/tray tracks
face the interior
Turn the front panel an
right side panel upsi e-
own.
Gui e the exten e wires
on the si e panel into the
holes along the insi e
frame of the front panel.
Secure the panels together
with hex screws.
With the cage bo y still upsi e
own, install the two tray hannel
rails. Orient the channels as
shown in the etail.
Attach the channels with han -
tightene hex screws.
After the tray channel rails are
attache , install a square rail with
hex screws.
Tighten all screws with the hex key.
A the ba k panel an left
side panel in the same metho ,
securing all panels together
with hex screws.
]R2
]C2
]C3
]C4
]C5

3continued...
4PIECES
F070—03/23—A4.3 Made in China for Prevue Pet Produ ts, In ., 224 N Maplewood Ave, Chi ago IL 60612 USA • 1 [312] 243-3624 • www.prevuepet. om • ustomerservi e @ prevuepet. om
Turn the cage bo y
upright.
Slip the assemble
cage unit over the
corner connectors on
the cage stan .
Flip the cage body upright
Install the two remaining
square rails. Secure the
rails with hex screws.
Insert the slotte en s of
the per hes on a vertical
wire an resting on a
horizontal wire or frame
rail.
Sli e the cup oors
up an insert the
food/water ups.
The close oor hol s
the cup in place.
Rotate the grille/tray lo k
out of the way an sli e the
grill into the top channels
an the tray into the
bottom channels for each
cage si e.
grilles and
trays are
interchangeable
CUPS
PERCHES
]G
]G
]T
]T
]D

4continued...
Assembly complete . {
F070—03/23—A4.4 For more wonderful ages, toys, and a essories for ats, birds, hi kens, rabbits, ferrets, dogs and small animals, visit www.prevuepet. om
Leave the center divider
grille out for full-cage use,
or slip it in place to ivi e
the cage interior into two
separate spaces.
Set the roof panel into place.
Back the corner screw out
an slip a orner bra ket
over the corner as shown in
the etail. Tighten the screw
to secure the bracket on the
corner.
Repeat the metho for all
corners to fully secure the
roof in place.
Tap the end aps into
each corner to finish
off the assembly.
5PIECES
]C7
BRACKETS
END CAPS

F070+F075—03/23—A4B M de in Chin for Prevue Pet Products, Inc., 224 N M plewood Ave, Chic go IL 60612 USA • www.prevuepet.com • 1 [312] 243-3624 • customerservice @ prevuepet.com
1. REMOVE ENDCAPS
From the top unit, remove
the footer endcaps.
From the bottom unit,
remove the top endcaps.
2. REMOVE HE SCREWS
From the bottom unit,
remove the four top corner
hex screws.
3. INSERT PLASTIC
CONNECTOR POSTS
Into the frame corners
of the bottom unit, insert
the plastic connectors,
following the INSTALLATION
TIP at the top of the page.
4. REPLACE HE SCREWS
On the bottom unit, replace
the hex screws in each
corner, making sure to keep
the corner brackets in place.
5. STACK THE UNITS
After all corner connectors
and corner brackets are
installed securely, slide the
frame corners of the top unit
over the connector posts
on the bottom unit.
• Three cage units can
be stacked safely.
• Do not exceed three
stacked cages.
INSTALLATION TIP :
Use the allen wrench to keep the plastic
connector from going too deeply into the
frame, and to align the holes in the post
and frame.
TOOLS NEEDED :
An allen wrench and maybe
a screwdriver or pliers to
help in removing endcaps.
CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL [e-mail]
1PIECES
x 4
HOW TO STACK
ASSEMBLED UNITS
Instructions online at www.prevuepet.com
Hampton Deluxe Cages
F070
MODEL #
F075
MODEL #
+