Pro-Elec PEL00925 User manual

1
Model: PEL00925
3kW Over Door Air Curtain Heater

2
When using electrical appliances, basic safety precautions should always
be followed to reduce the risk of re, electric shock and injury to persons or
property.
Read all instructions before using the appliance and retain for future reference.
• Check that the voltage indicated on the rating plate corresponds with that of the
local network before connecting the appliance to the mains power supply.
• This product must be earthed.
• Before drilling any xing holes, check that there are no hidden obstructions behind
the mounting surface, such as pipes or cables.
• Ensure the wall xing can support the weight of the device and that the wall xings
will be securely anchored into solid masonry.
• The air curtain can be mounted on normally ammable surfaces.
• This appliance is designed for indoor use only.
• There are no user-serviceable parts in this product. Refer servicing to qualied
personnel.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not operate this appliance with a damaged cord, after a malfunction or after
being dropped or damaged in any way.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualied persons in order to avoid a hazard.
WARNING: Do not use this appliance near bathtubs, showers, basins or other vessels
containing water.
• Do not block the air inlet or outlet as this will cause the air curtain to overheat.
• Do not place the air curtain near to soft furnishings as this may cause damage to
them.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out,
this appliance must not be supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on and off by the utility.
IMPORTANT SAFETY INFORMATION
WHAT’S INCLUDED
• Air Curtain
• Installation / operation manual
• Wall Plugs and mounting screws
PRODUCT OVERVIEW
• Ceiling or wall mounting (vertical or horizontal)
• Supplied with easy x bracket
• 3 switched controls for fan only and 2 heat settings
• 2 heat settings (1500W and 3000W)
• Pressed steel resin coated body
1. Screw
2. Wall bracket
3. Front panel
4. Switches
5. Body

3
INSTALLATION
• Remove the three screws securing the front panel and remove it.
• Loosen the retaining bolts just enough that the mounting bracket can be unhooked
and removed.
• Offer the mounting bracket up to the wall or ceiling having checked that there is no
hidden cables or pipes where the holes are required to be drilled.
• Mark the wall using the mounting bracket as a template and drill the wall or ceiling
and t the wall plugs or suitable alternatives as required.
• Secure the mounting bracket to the wall or ceiling using the screws supplied or if
not suitable for your particular installation, use suitable alternative xings.
• Hang the air curtain heater on to the mounting bracket so the bolts previously
loosened are located back into the slots in the bracket, ensuring the serrated
washer is located inboard of the bracket.
• Adjust the angle of the air curtain as required and tighten the bolts to secure the air
curtain in place. Do not over tighten the bolts.
• Ret the front panel and secure with the three screws.
• Switch off the mains supply before connecting the wiring as follows:-
Live - Brown or red
Neutral - Blue or black
Earth - Green and yellow or green
• If you are connecting to a fused spur, a 13A fuse should be used.
• Restore the power supply.
Washer
Bolt Mounting point

4
SPECIFICATIONS
CLEANING AND MAINTENANCE
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling of
the materials used. Contact your local authority for details of recycling schemes in your
area. Made in China. PR2 9PP
Man Rev 1.1
Voltage: 240V~/50Hz, Class I
Rated Power: 3000W
Air Volume: 254m³/hrs
Air Velocity (max): 4.8m/sec
Noise Level: 60dB
Net Weight: 5.2Kg
Dimension: 620×155×230mm
Gross Weight: 5.9Kg
• Disconnect the mains supply from the appliance and wait for it to cool completely
before cleaning.
• Clean with a soft damp cloth.
• Do not use any chemicals, abrasives or solvents that could damage the appliance.
OPERATION
• After nishing the installation, and switching on the power,
switch the larger switch ON.
• This powers just the fan so the curtain can provide
cooling air.
• The heating is controlled by the two smaller switches
marked I and II.
• Switch I allows warm air (1500W) to be delivered and switch II allows hot air
(3000W) to be delivered.
• If the unit overheats, an inbuilt thermal switch will cut the power and restore supply
when the unit has cooled down again.
• However severe overheating will cause internal thermal fuses to isolate and cut the
power for safety. These will not reset and are not user replaceable.
• Please contact a qualied electrician for repair having rst ascertained what caused
the air curtain to overheat and remedied it - airow restriction, excessive dirt etc.