Pro-Form 10.8x Bike User manual

Serial
Number
Decal
Model No. 831.21932.0
Serial No.
Write the serial number in the
space above for reference. BIKE EXERCISER
Userʼs Manual
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
• Assembly
• Operation
• Maintenance
• Part ist and Drawing
Sears, Roebuck and Co.
Hoffman Estates, I 60179
All manuals and user guides at all-guides.com
all-guides.com

2
WARNING DECA P ACEMENT
This drawing shows the location(s) of the
warning decal(s). If a decal is missing
or illegible, call 1-888-533-1333 and
request a free replacement decal.
Apply the decal in the location shown.
Note: The decal(s) may not be shown at
actual size.
TAB E OF CONTENTS
WARNINGDECA P ACEMENT ..............................................................2
IMPORTANTPRECAUTIONS ................................................................3
BEFOREYOUBEGIN ......................................................................4
ASSEMB Y ...............................................................................5
HOWTOUSETHEEXERCISEBIKE .........................................................11
MAINTENANCEANDTROUB ESHOOTING ...................................................18
EXERCISEGUIDE INES ...................................................................19
PART IST ..............................................................................22
EXP ODEDDRAWING ....................................................................23
ORDERINGREP ACEMENTPARTS ..................................................BackCover
90DAYFU WARRANTY ..........................................................BackCover
All manuals and user guides at all-guides.com

3
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your exercise bike before using your exercise bike.
ICON assumes no responsibility for personal injury or property damage sustained by or through the
use of this product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or per-
sons with pre-existing health problems.
2. Use the exercise bike only as described in
this manual.
3. It is the responsibility of the owner to ensure
that all users of the exercise bike are ade-
quately informed of all precautions.
4. The exercise bike is intended for home use
only. Do not use the exercise bike in a com-
mercial, rental, or institutional setting.
5. Keep the exercise bike indoors, away from
moisture and dust. Do not put the exercise
bike in a garage or covered patio, or near
water.
6. Place the exercise bike on a level surface
with at least 2 ft. (0.6 m) of clearance around
the exercise bike. To protect the floor or
carpet from damage, place a mat under the
exercise bike.
7. Inspect and properly tighten all parts regu-
larly. Replace any worn parts immediately.
8. Keep children under age 12 and pets away
from the exercise bike at all times.
9. Wear appropriate clothes while exercising;
do not wear loose clothes that could become
caught on the exercise bike. Always wear
athletic shoes for foot protection.
10. The exercise bike should not be used by
persons weighing more than 250 lbs.
(113 kg).
11. The pulse sensor is not a medical device.
Various factors, including the user's move-
ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
12. The exercise bike does not have a free
wheel; the pedals will continue to move until
the flywheel stops. Reduce your pedaling
speed in a controlled way.
13. Always keep your back straight while using
the exercise bike; do not arch your back.
14. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
IMPORTANT PRECAUTIONS
All manuals and user guides at all-guides.com

4
Thank you for selecting the new PROFORM®10.8X
exercise bike. Cycling is one of the most effective
exercises for increasing cardiovascular fitness, build-
ing endurance, and toning the body. The 10.8X
exercise bike offers a selection of features designed to
let you enjoy this healthful exercise in the convenience
and privacy of your home.
For your benefit, read this manual carefully before
you use the exercise bike. If you have questions
after reading this manual, please see the back cover
of this manual. To help us assist you, note the product
model number and serial number before contacting
us. The model number and the location of the serial
number decal are shown on the front cover of this
manual.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Seat
Adjustment Knob
Pedal/Strap
Console
Pulse Sensor
Wheel
Backrest
Fan
Handlebar
BEFORE YOU BEGIN
All manuals and user guides at all-guides.com

5
ASSEMB Y
Assembly requires two persons. Place all parts of the exercise bike in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver and an
adjustable wrench .
See the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART IST near the end of this manual. The number following
the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if
it has been preassembled. To avoid damaging parts, do not use power tools for assembly. If a part is
missing, call 1-888-533-1333.
M10 Locknut
(63)–4
M8 Locknut
(60)–4
M8 Split
Washer (59)–5
M6 Washer
(55)–8
M8 x 25mm Button
Screw (33)–3
M8 x 70mm Button
Bolt (54)–2
M6 Locknut
(27)–4
M10 x 75mm Carriage Bolt (51)–4
M6 x 42mm Button
Screw (49)–4
M6 x 38mm Patch
Screw (48)–4
M6 x 38mm Button
Bolt (69)–4
M4 x 16mm
Screw (52)–4
All manuals and user guides at all-guides.com

6
1.
While another person lifts the front of the Frame (1),
attach the Front Stabilizer (3) to the Frame with two
M10 x 75mm Carriage Bolts (51) and two M10
ocknuts (63).
3
51
1
1
3. Attach the Wheels (18) to the Rear Stabilizer (4)
with two M8 ocknuts (60). Press a Wheel Cap (19)
onto each Wheel.
Attach the Rear Stabilizer (4) to the Rear Frame (2)
with two M10 x 75mm Carriage Bolts (51) and two
M10 ocknuts (63).
2. Slide the Rear Frame (2) out of the Frame (1), and
then tighten the Adjustment Knob (17) into the
Frame.
51
18
4
18
19
3
63
63
60
2
63
17
2
1
2
To make assembly easier, read the
information on page 5 before you begin.
All manuals and user guides at all-guides.com
all-guides.com

7
5. Attach the Backrest (5) to the Seat Frame (7) with
four M6 x 38mm Patch Screws (48) and four M6
Washers (55). Do not tighten the Patch Screws
yet.
5
5
7
55
55
48
48
4. Attach the Seat Frame (7) to the Handlebar (6) with
two M8 x 70mm Button Bolts (54), two M8 Split
Washers (59), and two M8 ocknuts (60). Do not
tighten the Button Bolts yet.
7
6
60
54
59
59
4
All manuals and user guides at all-guides.com

8
7
Battery Cover
Batteries
16
7. The Console (16) can use four 1.5V “D” batteries
(not included); alkaline batteries are recommended.
IMPORTANT: If the Console has been exposed
to cold temperatures, allow it to warm to room
temperature before inserting batteries.
Otherwise, you may damage the console dis-
plays or other electronic components. Remove
the battery cover and insert the batteries into the
battery compartment. Make sure to orient the bat-
teries as shown by the diagram inside the
battery compartment. Then, reattach the battery
cover.
To purchase an optional power adapter, contact
the store where you purchased this product or
call the telephone number on the cover of this
manual. To avoid damaging the console, use
only a manufacturer-supplied power adapter.
Plug one end of the power adapter into the recepta-
cle on the console; plug the other end into an outlet
installed in accordance with all local codes and ordi-
nances.
12
55
55
55
7
6
49
2
49
6. Have another person hold the Seat Frame (7) under
the Rear Frame (2) as shown. Attach the Seat
Frame and the Seat (12) to the Rear Frame with
four M6 x 42mm Button Screws (49) and four M6
Washers (55).
See step 4. Tighten the two M8 x 70mm Button
Bolts (54).
See step 5. Tighten the four M6 x 38mm Patch
Screws (48).
All manuals and user guides at all-guides.com

9
9. While another person holds the Console (16) near
the Upright (13), connect the console wire to the
Upper Wire Harness (36). Then, connect the con-
sole pulse wires to the Pulse Wires (71). Insert the
excess wire downward into the Upright.
Tip: Avoid pinching the wires. Attach the Console
(16) to the Upright (13) with four M4 x 16mm
Screws (52).
916
Console
Wire
Pulse Wires
52
13 Avoid pinching
the wires
36
71
8. Identify the eft Pulse Bar (65), which is marked
with a “ eft” sticker.
Have another person hold the eft Pulse Bar (65)
near the left side of the Upright (13). Make sure
that the hexagonal holes are in the indicated
location.
Insert the left Pulse Wire (71) into the Upright (13)
and pull it upward out of the top of the Upright.
Tip: Avoid pinching the wires. Slide the eft Pulse
Bar (65) onto the Upright (13). Attach the eft Pulse
Bar with two M6 x 38mm Button Bolts (69) and two
M6 ocknuts (27). Make sure that the ocknuts
are in the hexagonal holes.
Repeat this step for the Right Pulse Bar (66).
8
65
13
66
69
71
71
36
27
Avoid pinching
the wires
Hexagonal
Holes
All manuals and user guides at all-guides.com

10
11
Strap
24
Tab
31
11. Identify the eft Pedal (24), which is marked with a
“ eft” sticker.
Firmly tighten the eft Pedal (24) counterclock-
wise into the left arm of the Crank (31).
Tighten the Right Pedal (not shown) clockwise into
the right arm of the Crank (31).
Adjust the strap on the eft Pedal (24) to the
desired position, and press the end of the strap
onto the tab on the eft Pedal. Adjust the strap on
the Right (not shown) in the same way.
12. Make sure that all parts are properly tightened before you use the exercise bike. Note: Some hardware
may be left over after assembly is completed. Place a mat beneath the exercise bike to protect the floor.
13
36
10
10. While another person holds the Upright (13) near
the Frame (1), connect the Upper Wire Harness
(36) to the ower Wire Harness (8).
Tip: Avoid pinching the Wire Harnesses (8, 36).
Slide the Upright (13) onto the Frame (1). Attach the
Upright with three M8 x 25mm Button Screws (33)
and three M8 Split Washers (59).
8
33
33
59
59
1Avoid pinching the
Wire Harnesses (8, 36)
All manuals and user guides at all-guides.com