PROAIM STD-PTZ-01 User manual

1
What’s In The
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
3-Stage PTZ Camera Support Stand w 5/8”
Baby Pin & Ball Head (STD-PTZ-01)
Assembly Manua l
Ball Joint
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
PTZ 3-Stage Stand Bag packing
Pouch for Ball Joint
3 x Foots

2
Camera Support Stand Setup
 Stretch out the legs and secure them properly
with the help of knobs.
NOTE: The stand comes with spiked feet &
rubber shoes, that makes it t to be used on
dierent surfaces with extra stability.
 Adjust the height of the stand by loosening the
top and boom knobs and then ghten it
properly.
 Insert the feet into the legs and ghten them
properly.
 Loosen the top and boom knobs as shown in
the image.
 Adjust the height of the PTZ-support stand
according to your requirement.

3
 Loosen the ball head's knob and mount it
properly on the 5/8" baby pin.
 By loosening the telescopic knob, adjust the
height of the stand and ghten the knob
properly.
 Properly ghten the knob, as shown in the
image.
 Loosen the knob of the ball head and remove
it.
NOTE: The Stand has 5/8" baby pin mount on
the top to aach the addional camera support
accessories.
NOTE: The support Stand has 3 secons to
adjust the height with quick & secure locking
knobs. The central main post of the stand is
adjustable, through which you can change its
height as per your requirement.

4
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.
YOUR PROAIM 3-STAGE PTZ CAMERA SUPPORT STAND
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)