PROAIM SS90 User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
SS90 Studio Camera Stand 4 / 8 with Side
Spigot Arm (TP-SS90-01)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Studio Stand
3 x Wheels
Side Spigot Arm
What’s In The Box
Upper Column
1 x Spanner (Size - 17)
(T-Type Allen Key (Size - 4mm)

2
Camera Stand Setup
• Aach the studio stand and wheel by match-
ing the holes.
• Secure the wheel by ghtening them properly
with the help of a spanner. As shown in the
image.
• Similarly, aach the reaming wheel with the
Studio Stand following the same process.
• Pull open with the help of the wheel of the
studio stand. As shown in the image.
NOTE: The collapsible design of the legs allows
the stand to fold up into a compact size,
ensuring quick setup, easy storage & travel.
• Stretch out the legs of the Stand and securely
ghten them using the provided knob.
• Push the side spigot arm into the stand.

3
• Once the arm is properly inserted, you can
again press the Spigot Arm to an upward/
downward posion.
NOTE: The Castor Wheels provide easy &
smooth movements across sets and lock via the
footbrake that each one of them is equipped
with.
• Remove the grub screw aached to the stu-
dio stand by loosening it with the help of the
Allen key
• Then insert the upper column matching the
screw holes of the studio stand.
• Again, Insert the grub screw and ghten it
properly with the help of the Allen key. Then
properly secure the upper column. As shown
in the image.
• Loosen the knob of the spigot arm, then re-
move the baby pin to change the angle of the
baby pin.
NOTE: The Side Spigot Arm comes equipped
with an adapter spigot which has a 1/4”-20
screw on one side and a 3/8”-16 screw on the
other side for facilitang mulple setup
conguraons.
Footbrake Lock
Footbrake unlock

4
• Now insert the Baby Pin aer changing its an-
gle and secure it by ghtening the knob of the
Spigot Arm.
• Mount the ashlight (Not Included) on the
5/8’’ baby pin.
NOTE: The Side Arm oers mulple setup
conguraons via the adapter spigot and 5/8”
Baby Pin receiver.
• Here is the nal assembled image of the Stu-
dio Camera Stand.
• Versale height: Use with or without the up-
per column.
Maximum: 7.6 / 92’’
Minimum: 4/ 49’’
1/4” screw
3/8” screw

5
YOUR PROAIM SS90 STUDIO CAMERA STAND 4FT / 8FT WITH SIDE SPIGOT ARM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.