PROAIM VI-2AXS-01 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
2-Axis Horizontal Vibraon Isolator for Camera Gimbals (VI-2AXS-01)
Assem b l y M a n u a l
2 Axis Vibraon Isolator Flight Case Mitchell Key

2
Start by unlocking the knob, as shown in the
image. This knob acts as an integrated brake
and helps in locking the movements of the
spring.
Adjust the isolator platform horizontally as per
your,need.
For even more smoothness, you can adjust the
hydraulic dampers via the knob present. The
knob has H & S marked on it. You can rotate
the knob either to its Soft (S) or Hard (H) side
as per the requirements.
After adjusting the platform to the desired
position, lock the knob back.
Vibraon Isolator Setup
The next step is to use a top mount as per your
fluid head requirements, as shown in the
image.
The vibration Isolator accepts camera heads in
various options such as Mitchell, 100mm Bowl,
150mm,Bowl.
Note: The Vibration Isolator minimizes
vibrations on the X and Y horizontal axis during
abrupt movements and can hold 10-100kg
payloads.
In the case of a Mitchell Slider (not included)
Setup, you can directly mount the vibration
isolator onto the slider as shown in the image.
Then attach your fluid head (not included) to
the isolator.
Note: The vibration isolator has a standard
Mitchell mounting and can be directly mounted
on any other Mitchell gear.

3
YOUR 2-AXIS HORIZONTAL VIBRATION ISOLATOR FOR CAMERA GIMBALS
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
To secure the fluid head, you will need to
install a Castle ring (not included) at the
bottom of the isolator platform and tighten it
correctly.
Then, Insert a Mitchell key into the bottom of
the vibration isolator and tighten the castle
ring to secure it properly.
Note: Mitchell Key ensures easy and fast
rigging of Mitchell mounts or Remote Heads to
the vibration isolator.
Now you can securely mount a camera setup
to the Vibration Isolator.

4
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.