PROAIM CINEMA ST-HWK-01 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Vest Jacket
Hawk Gimbal Support Rig (ST-HWK-01)
Le Shoulder Arms with 1 x Rod
Bag Packing
Right Shoulder Arms with 1 x Rod

2
 Fasten the buckle around your chest to adjust
the vest.
NOTE: Adjustable waist is supported by Velcro
straps and Push-t buckles, making it a
comfortable t for all body types.
Hawk Gimbal Support Setup
 Wear the vest jacket and buckle up from the
waist.
 Use the strap to ghten or loosen the chest
Velcro as per your comfort.
 Similarly, follow the same procedure to adjust
the vest area with the help of the strap.
 Adjust the vest around your waist via the
provided strap.
 Now, Loosen the vest rod knob.
NOTE: It has an adjustable vest rod with a
ratchet knob.

3
 Aach the le arm with the rod by inserng it
into the hole of the rod.
 Now, set the length of the rod and secure the
posion by ghtening the bolt of the power
arm using the Allen Key.
 Tighten the ring of the le arm to properly
secure it, and loosen the bolt of the power
arm using the Allen Key.
 Similarly, follow the same instrucon to
assemble the right shoulder arm.
 Insert the le arm into the jacket as shown in
the image and repeat the same process for
the right arm.
 Adjust the rod per your requirement, then
ghten using the provided knob.

4
 Now, loosen the locking knob of the arms to
set them as required, and then ghten the
locking knob.
 Both arms will look like this, as shown in the
image.
NOTE: There is a locked area on the top Posion
power arms to support a payload of 8-12kg/
17-26lb and hold of 14Kg/30lb at the lock area.
NOTE: The rig oers you more stability and
control over your 2 Axis Gimbals during
handheld shoong and the dual rod system
removes the X & Y axis fricons for overall
stability and balance.
 Now, the Handheld Gimbal (Not Included) is
correctly aached to the arms.
 Aach the right arm’s hook with the Velcro of
the Handheld Gimbal (Not Included) and
repeat the same with the le arm.
 Remove the quick-release plate from the
Handheld Gimbal (Not Included) by loosening
the knob.

5
 Push the provided pin on the Gimble plate and
remove it to aach it to the camera
(Not Included).
 Now, slide the Gimble to aach it to the
Handheld Gimbal (Not Included) and ghten
the knob to secure it.
 Secure the Gimble plate with the camera
(Not Included) by ghtening with the provided
bolt using a screwdriver.
 Aach the Camera (Not Included) with the
Gimbal (Not Included) and pull the lock lever
to secure it.
 The Gimbal (Not Included) has been properly
aached to the camera (Not Included).

6
YOUR PROAIM HAWK GIMBAL SUPPORT RIG
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Dierent Angles During Wide Turning & Height Range

7
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.