PROAIM MC-RONS User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is
listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable
copyright statutes or in wring by the Publisher.
Assembly Manual
Accessory Mounng Clamp for DJI Ronin-S Gimbal
(MC-RONS)
Gimbal Mounng Clamp
3mm Allen Key 1 X 16mm & 19mm Bush
NATO Handle

2
Setup
 Loosen the knob of Nato handle to aach it
with Gimbal mounng clamp.
 Slide the Nato handle onto the Gimbal
mounng clamp (through the Nato Rail sys-
tem) and ghten it with provided knob.
 To aach it with any standard Arm & Vest Sta-
bilizaon system remove the boom clamp of
Nato handle.
 Now insert the bush into the boom of handle
& t it properly. (use bush size as per your
requirement)
Note: Nato Handle having 22mm Mounng Pin
diameter. We provided two bushes which
converts it into 16mm & 19mm diameters.
 Insert the Accessory Mounng Clamp onto the
stabilizaon arm (Not Included). Now you can
aach your Ronin-S gimbal on it.

3
YOUR PROAIM ACCESSORY MOUNTING CLAMP
ALL DRESSED UP AND READY TO GO!
Warranty: We oer one year warranty for our products from date of purchase. Within this period of
me, we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor
does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to
inspecon and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling
in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our
company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.