PROAIM CINEMA Series User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Airwave V530 Shock-Absorbing Arm (5-30kg/ 11-66lb) (VI-ARWV-530)
Assembly Manual
Airwave V530 Arm
Vibraon Isolator Isolator Secon
Flight Case

2
Aach your Airwave Arm with Pole via clamps
and ghten knobs to secure it properly.
Loosen the bolt with allen key and remove
L-plate from the Airwave.
Airwave V530 Setup
Now aach the Isolator Secon with Airwave
Arm. Then ghten these bolts with Allen key
to secure properly.
Aaching Isolator Secon
In order to smoothen Dampening eect, turn
the adjustment knob. If the arm is too so,
turn it towards direcon of H (Hard). If the
arm is rigid turn it towards the direcon of
S (So).
NOTE: The valves should always be adjusted
evenly and set identically. Rebound and
compression of the hydraulic valves should be
set in such a way so that any loose swinging or
vibraon of the arm is eliminated.
Loosen springs for lower setup weights &
ghten them for higher setup weights.
Spring Adjustment
NOTE: Load Capacity can be easily adjusted by
adjusting springs. Adjust both springs equally.
Airwave parallel with the ground gives the best
performance.

3
YOUR PROAIM AIRWAVE V530 SHOCK ABSORBING ARM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
 Aach Vibraon Isolator with Isolator
Secon. Insert the bolts from both side of the
Isolator Plate then ghten all the Allen bolts
with the help of Allen key.
 Unlock the Quick Release Plate, aach your
Gimbal then lock the Quick Release Plate as
shown in image.