PROAIM VI-ISSC-8 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
8" Sucon Camera Vibraon Isolator, 5-15kg (VI-ISSC-8)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Assembly Manual
3/16”, 3mm, 4mm Allen keys
8x 1” slots for
Safety straps
Tension Cables
Quick Mount for
DJI Ronin
8” Sucon Cup
Accessory mounng
threads
Shock module
4 x Red Wires

2
 Press down the sucon cup and keep the
pushing pump to x it on smooth surface.
You Can remove the sucon cup by push the
buon.
Vibraon Isolator Setup
NOTE: You can interchange the wires according
to the payload requirement.
 Loosen allen bolts on the top plate & boom
plate with the help of allen key. Remove the
wire.
 Aach the red wire on top plate & boom
plate with the help of allen key.
YOUR PROAIM PRO CAMERA VIBRATION ISOLATOR FOR GIMBALS,
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)

3
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.