PROAIM P-18-JS User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Central
Post
LCD Mounng Arm
Tool Pouch
18 Camera Crane Jib with Stand (P-18-JS)
Assembly Manua l
Jib Stand
Secon 1st
Secon 2nd
Secon 3rd
Secon 4th
Secon 5th
Weight Closer
Weight Rod
Accessory Wire Tensioner Knob

2
 Slide Central Post of Jib onto the Jib Stand
and ghten knob-2 to secure it.
Jib Stand Setup
 Open shank from central post. Leave the
black washers at one side help of wrench.
 Insert the secon 4 inside central post then
Align holes of secon with central post to
screw in the shank back.
 Then ghten the bolt properly with the help
of a wrench, and to aach secon 5 to 4,
loosen the bolt from secon 4.
Knob 2
Jib Secons Setup
 Secon-5 has connecng bars aached with
secon-4 on both ends and then ghten
them together using provided Allen key.
 Connue the Arm build by sliding in secon
3 onto secon 4 as shown in the image.
Connecng Bar

3
 Loosen the bolt from the connecng bar with
the help of a 6mm Allen key and wrench,
then insert the bolt using the holes provided.
 Then ghten them together using provided
Allen key and wrench as shown in the image.
 Connue the Arm build by sliding in secon
2 onto secon 3, and nally secon 1 onto
secon 2.
 Connect the Wire/Cable Tensioner with
cable. Simply rotate the mid-secon handle
to ghten the cable adding required amount
of strength to the system.
Tighten Bolt
 Insert the weight rods into secon 5, and
then secure them to the weights with 1”
holes.
 Then ghten them together using provided
Allen key as shown in the image.
Note: The Jib Stand supports an incredible
payload of up to 90kg and is highly stable in
use.

4
 Secure your camera setup with weight closers
as shown.
Note: Once you discover correct balance, con-
sider marking the weights for that parcular
camera; facilitang an easier set up the next
me.
 Aach LCD mounng arm onto central fork
then ghten the knob.
 Lock the pin for keeping your camera in a
xed angle to take stable shots.
Note: The Jib has many great features such as
a two-arm design, camera mount lt control,
ribbed jib secons & monitor mounng.
Note: The Central fork has provision to aach
LCD Monitor (Not Included) via LCD Mounng
Arm.
Note: You can adjust the arm length from 18 feet to 14 feet and 12 feet by quickly removing the jib
secon. The ability to change the length allows you to use the crane in a variety of scenarios.
Fits in Almost Any Locaon Dierent Shoong Lengths

5
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
YOUR PROAIM 18 CAMERA CRANE JIB WITH STAND
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Note: The jib adapts to 3-axis gimbal, pan lt
and uid head. The Jib has Universal front
mounng to adapt Pan Tilt Heads and 3-Axis
Gimbal Stabilizers. Camera Mount Tilt Control
oers both Auto lt mode and a Manual lt
mode with a control handle.