PROAIM RS274 User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
SnapRig Professional Kit (RS274)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
1 x Top Plates
2 x 12" 15mm Aluminium Rods
Dovetail Plate
15mm Baseplate with
Quick Release Plate
15mm Road Clamp Adapter
1x L-Type Allen Keys (Sizes: 4mm)

2
SnapRig Kit Setup
 Loosen the knob of the Fluid head
(Not Included).
 Then remove the quick-release plate by
pushing the push-pin knob on the back of the
uid head (Not Included).
 Properly ghten the knob of the Fluid head
(Not Included).
 Press the push-pin buon of the uid head
and then slide and isert the dovetail plate.
 Now aach the quick-release plate by
aligning it with the dovetail plate, and then
secure the assembly using the bold with a
screw driver.

3
Baseplate with Quick Release Plate
 Loosen the knob of the baseplate with
quick– release Plate.
 Push the pin axed to the dovetail plate, as
shown in the image.
 Loosen both the knobs of the baseplate.
 Baseplate has now been properly aached to
the dovetail plate.
 Then slide and insert the baseplate and
secure it by ghtening its knob.
 Then insert the Aluminum rod into the
baseplate.

4
YOUR PROAIM SNAPRIG PROFESSIONAL KIT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
 Similarly, follow the same procedure for
aaching another Aluminum Rod to
Baseplate.
NOTE: The baseplate mounts securely to an
ARRI-standard dovetail plate, with safety
latches on each end to secure your gear. It
easily aaches to a tripod or uid head via
1/4"-20 and 3/8"-16 mounng threads on the
dovetail plate.
 Now push the press buon of the baseplate
and remove the quick-release plate. Aach
the quick-release plate to the base of the
camera. Mount the FX6 camera
(Not Included) by sliding it over the baseplate.
 The camera mounts onto the quick-release
plate that further mounts the camera onto
the 15mm LWS baseplate.
Compable Camera :
Sony FX6 cinema camera

5
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.