PROAIM LB230 User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
SnapRig L-Bracket (LB230)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Magnezed Screwdriver
Camera bolt size: 1/4
SnapRig L-Bracket

2
SnapRig L-Bracket Setup
• There is a magnezed screwdriver at the
boom of the SnapRig.
• Use the magnezed screwdriver to loosen
the screw.
• Mount the SnapRig and ghten the knob of
the ball head.
• Loosen the knob of the ball head and remove
the camera plate.
• Now, extend the side plate.

3
YOUR PROAIM SNAPRIG PROFESSIONAL KIT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
• Now, mount the SnapRig vercally on the ball
head.