PROAIM VI-252-00 User manual

Airwave Vibration Isolator Arm
(VI-252-00)
All rights reserved
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the publisher.
I n s t r u c t i o n M a n u a l

Proaim Airwave Vibraon Isolator Arm 2
Table of Contents
Subject Page
Foreword 3
Introducon 4
Safety Hints 5
Assembling 6-8
Warranty 9
At Proaim, our goal is to ensure 100% Customer Sasfacon in all that we do.
We back our sales with a 1 year warranty from the date of purchase and work hard
to resolve any problems in the unlikely event one should arise.
With our commitment to connuous improvement and your Feedback, building on
our reputaon of providing aordable, quality products is
PRIORITY #1.

Proaim Airwave Vibraon Isolator Arm 3
Welcome To Proaim!
Dear Client,
On behalf of all the people that work so hard to provide you with the most
up-to-date, exible and cost-ecient producon gear, we would like to welcome
you into the Proaim family.
By purchasing your Airwave Vibraon Isolator Arm, you have just joined a host of
designers, engineers, machinists, assembly, customer service and oce sta that
take great pride in all that they do. Our mantra of connuous improvement has
been the guiding principle of how we conduct our business since day one.
Once you have the opportunity to experience your new Isolator Arm, we hope you
will agree that we cra quality products at a compeve price. Products designed
to meet and exceed the standards of today’s real producon world.
Standards set by our valued clients and standards we strive to maintain.
With Best Wishes,
Proaim Team

Proaim Airwave Vibraon Isolator Arm 4
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received
all that is listed below.
 Proaim Airwave Vibraon Isolator Arm
 Isolator
 Ronin Mounng Plate
Proaim Airwave Vibraon Isolator Arm
Ronin Mounng Plate
Isolator
The Proaim Airwave Isolator Arm is a 3-axis dampening system with an addional
An-Vibraon Mount for stabilizing roll and lt errors as well as vercal moon and
vibraons. The Airwave arm is especially designed to be used with Handheld 3-Axis
Camera Gimbals like DJI Ronin, Movi and Shotover G1. The Isolator Arm with
An-Vibraon Mount soens the vibraons typically experienced when shoong
from moving plaorms on rough terrain. for gimbals that you want to mount on
vehicles such as cars, ATVs, boats, snowmobiles etc.
Introducon

Proaim Airwave Vibraon Isolator Arm 5
Safety Hints
ATTENTION: PLEASE READ THIS BEFORE USING TO PREVENT SERIOUS DAMAGE TO
TRACK!
The Airwave Vibraon Isolator Arm is designed to deliver best possible damping,
shock absorpon, and years of service.
This is accomplished by using materials and components of the highest quality that
are extremely expensive. To avoid costly damage, and experience its full potenal,
please observe the following guidelines.
ALWAYS SET THE CORRECT PRESSURE
Aer mounng the Shock Absorber and assembling the Iso Dampener, head and
camera, the pressure of the suspension shock needs to be set.
NEVER HAVE DIFFERENT SPRING ADJUSTMENTS
For ner tuning and addional tension support, adjust the 2 springs to the same
degree of tension.
ALWAYS KEEP FINGERS CLEAR FROM ANY OF THE MECHANICAL MOVING PARTS
Operate the Arm from outside of any of the crossing arms and from the spring
sha.
FOLLOWING THESE GUIDELINES WILL PROVIDE BETTER IMAGES AND TROUBLE
FREE OPERATION.
SHOULD YOU NEED ADDITIONAL INFORMATION, TECHNICAL ASSISTANCE IS
AVAILABLE ‘ONLINE’ BY CONTACTING YOUR SALES REPRESENTATIVE.
FOLLOWING THESE GUIDELINES WILL PROVIDE BETTER IMAGES AND TROUBLE FREE
OPERATION.
SHOULD YOU NEED ADDITIONAL INFORMATION, TECHNICAL ASSISTANCE IS
AVAILABLE ‘ONLINE’ BY CONTACTING YOUR SALES REPRESENTATIVE.

Proaim Airwave Vibraon Isolator Arm 6
Assembling
 Loosen the knob of pole clamps and insert onto the pole and ghten the clamp properly.
 Aach the isolator onto the nose
bracket with the help of bolt and ghten
the bolts with the help of allen key.
NOTE: The nose bracket can be adjusted up and down as shown in the image.

Proaim Airwave Vibraon Isolator Arm 7
1. load resistance can be easily
adjusted .Loosen the spring anclockwise to
decrease the weighing capacity & ghten
the to anclockwise to increase the
weighing capacity.
 The nose plate can be installed in the
opposite direcon .
NOTE: With the arm at the level posion or
slightly above the horizontal, push down the
front of the arm and check the movement of
the arm
SPRING ADJUSTMENT

Proaim Airwave Vibraon Isolator Arm 8
1. The Ronin can be easily aach onto the Isolator with 1/4”-20— 3/8”-16 threads.
2. Aach the ronin plate onto the nose in order to your ronin setup .
 In order to smoothen the spring tension,
turn the adjustment knob in the
direcon of H (hard). incase arm is too
so. If the arm is rigid turn it in the
direcon of S (so)
ATTACHING THE RONIN

Proaim Airwave Vibraon Isolator Arm 9
WARRANTY
We oer a one year warranty for our products from the date of purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note
that we will not cover any shipping costs for returning the product to us. If any VAT or import
dues are applied to the return, we will also charge these costs to the customer.
The warranty does not include, by the way of example, damage caused by products that we do
not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product ,
or service by anyone other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or
occurring due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of the
replacement parts only) to the customers aer the Warranty Period has expired. We will cover
the complete cost of sending replacement parts within the warranty period. Aer that, Nominal
cost of the product & Actual shipping cost will be charged.
Do not send the unit to us without rst geng a response and geng the approval to send back
the item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our
Best to help you out. For any other assistance you can reach us via email.
YOUR PROAIM AIRWAVE VIBRATION ISOLATOR ARM
ALL DRESSED UP AND READY TO GO
(SHOWN WITH OPTIONAL ACCESSORIES)