PROAIM JB-FLMS-01 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Fly-master 13 Telescopic Carbon Fiber
Jib Crane (JB-FLMS-01)
Fly-Master Jib for Zhiyun Crane-2
Top Cable Wire
Cable Guide Rod
Weight Rod

2
 Loosen the boom clamp of the uid head
(Not Included) and mount it on the stand.
Fly Master Jib Setup
 Then properly ghten the boom clamp on
the 100mm bowl stand (Not Included), as
shown in the image.
NOTE: It comes with a tripod mount with 1/4"
-20 and 3/8"-16 threads on the boom to mount
it on the uid head.
 Now remove the uid head plate by pressing
the lock lever.
 Aach the plate to the Fly-master Jib and
securely ghten it, matching the threads, with
the help of a screwdriver.
NOTE: It extended when not in use at
congested shoot sites. Just slide in or out when
required.
 Now mount the Fly-master Jib on top of the
uid head and properly ghten it with the
locking lever.

3
 Loosen the knob and increase the height of
the jib as shown in the image.
 Aach the Gimbal mounng adapter to the
Gimbal (Not Included) and properly ghten
using a screwdriver.
NOTE: Any other gimbal with a handle,
featuring a 1/4"-20 or 3/8" -16 threaded hole at
its boom, can be aached.
NOTE: You can increase the lengths of jib as
per requirement.
 Loosen the ratchet knob and open the clamp.
 Then remove the Gimbal mounng adapter,
as shown in the image.
 Aach the Gimbal (Not Included) to the clamp
and properly ghten it via the knob.
Gimbal Setup

4
 Then properly ghten the knob.
NOTE: High-grade Aluminum constructed
clamps at each secon’s end promise a strong
clamping force.
 Loosen the knob and insert the weight rod.
 Properly ghten the knob.
NOTE: Provided highly robust weight rod
supports universal weight plates with a 25mm
hole diameter.
 Loosen the clamp’s knob and rotate the
clamp.
 Insert weight (Not Included) according to
your requirement.
Inserng weight rod in Fly master jib
NOTE: It’s compable with Zhiyun Crane-2 &
other hand-held gimbals with 1/4” or 3/8”
Mounng threads.

5
 Now loosen the clamp's knob and rotate the
clamp.
 Now, properly ghten the knob and insert the
cable guide rod.
 Then insert the top cable wire into the rod, as
shown in the image.
NOTE: Set the Cable Guide rods’s posion
according to your requirement.
 Similarly, insert the second end of the wire
into the clamp, as shown in the image
NOTE: It facilitates convenient underslung &
over-slung operaons for various shot
requirements.
 Properly aach the rst end of the top cable
wire to the clamp.
Aaching Top cable wire

6
NOTE: Compable gimbals- Zhiyun-Tech
Crane-2 Gimbal (Direct) Single Handle Gimbals
with 1/4"-20 & 3/8"-16 Mounng Threads.
 Then properly ghten with the help of the
knob.
NOTE: Tripod mount also has a total of three
1/4"-20 threaded holes on the sides to aach
monitors & other accessories.
LCD Monitor Setup
Maximum Extandable Length of Fly Master Jib
NOTE: Fully extended length=13. & Length of 1st 3 each secon =3. & length of last secon=4.
 Properly match the threads of the LCD (Not
Included) and mount the LCD, as shown in the
image.

7
YOUR PROAIM FLY-MASTER TELESCOPIC CARBON FIBER JIB CRANE
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.