PROAIM P-QRG-01 User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Pro Quick Release Plate (P-QRG-01)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Pro Quick Release Plate
Bush
2 x Camera Bolts
(Size: 1/4” & 3/8”)

2
• Mount the Handgrip (Not included) on the
Pro Quick Release Plate, as shown in
the image.
• Aer mounng the Handgrip, ghten the
screw 1/4”-20 using the screwdriver
Now, ghten the ratchet knob, as shown in
the image.
NOTE: 1. Our Plate oers double security for
your Camera with its locking lever and locking
buon.
2. If the handle of the Gimbal is too slim to t
into the Plate, we’ve included a bush to solve
this problem.
Pro Quick Release Plate Setup
• Remove the 3/8” -16 mounng screw of the
Pro Quick Release Plate using a screwdriver
(Not included).
NOTE: The Quick Release Plate has a 3/8"-16
and a 1/4"-20 mounng screw for safe
mounng of various professional Cameras.
• Mount the Ronin RS2 (Not included) on the
Handgrip.
NOTE: It's built to withstand the rigors of
professional use, plus the padding on the
Plate protects your Camera from twisng or
scratching.
• Now, properly lock the gimbal in posion
using the locking knob. The Ronin RS2 has
been properly mounted on the Handgrip.

3
• Aer sliding in the Ronin, properly ghten
the ratchet knob.
• Now, press the push pin to fully slide the
Gimbal into the Pro Quick Release Plate, as
shown in the image.
• Aer sliding the Camera on the Plate, use
the locking knob to properly lock the
Camera in its posion as shown in the
image.
• Properly slide the Camera (Not included) on
the Pro Quick Release Plate.
• Loosen the ratchet knob of the Dampener
(Not included) and slide it into the
Dampener of the Gimbal.
Camera Mounng Setup
NOTE: Our Quick Release Plate is designed to
seamlessly integrate with popular gimbal
stabilizers like DJI RS Series, ensuring universal
compability.

4
YOUR PROAIM PRO QUICK RELEASE PLATE
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.