PROAIM RS-1-00 User manual

Proaim 15mm Pro Rail Support
(RS-1-00)
All rights reserved
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permied by
the applicable copyright statutes or in wring by the Publisher.
I N S TR UC T I O N M A N UA L

PROAIM 15mm Pro Rail Support 2
I N T RO DUC T I O N
Proaim 15mm Pro Rail Support is specically designed to work for Follow Focus and long lenses. If
follow focus is used to simplify and enhance the focusing technique, the rod support system along
with quick release and base plate is used to lessen the burden of camera. Rail System help take the
weight o the front of the camera and takes the strain o the lens mount. Also support follow-focus
systems.
W H AT ’s I N TH E B OX
Please inspect the contents of your shipped package to ensure you have received all that is pictured
and listed below.
2x 150mm Male Threaded Rods
L-Key
Shim Set
2x 300mm Female Threaded Rods
Allen Bolts
Quick Release with Base Plate
 Camera Mounng: The quick release makes easier to mount the camera on the rail system.
Simply screw-in the camera with the quick release plate and insert it into the quick release
base adapter of the rail system.
A S S E M B L IN G YOUR PROA I M 1 5 M M P R O R A I L S U P P O R T

PROAIM 15mm Pro Rail Support 3
S H I M S A P PL IC AT I O N I N ST R UC TI O N S:
If you need to add the shim on it, go through the following steps:
 First remove the quick release adapter
with L-key.
 Then remove the center-adapter by
removing the boom Allen-bolts with
L-key provided.
Shims Set – Height Adjustment: The height of
the camera can be adjusted by adding the
shims.
This kit includes 6 shims (in 1mm, 3mm &
6mm two of each).
 And then add shims as per need and
re-assemble it with longer 4x30mm or
4x25mm screws.

PROAIM 15mm Pro Rail Support 4
 The le image shows maximum height 60mm with shim set and the right image shows
minimum height 45mm without shim set.
THE PROAIM 1 5 M M P RO R A IL S U PPO R T IS R EADY TO U S E
Exclusive of Tripod Stand, Mae Box, Mic & Camera setup
WARRANTY
We oer a one year warranty for our products from the date of purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note that
we will not cover any shipping costs for returning the product to us. If any VAT or import dues are
applied to the return, we will also charge these costs to the customer.
The warranty does not include, by the way of example, damage caused by products that we do not
supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product , or
service by anyone other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or
occurring due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of the

PROAIM 15mm Pro Rail Support 5
replacement parts only) to the customers aer the Warranty Period has expired. We will cover
the complete cost of sending replacement parts within the warranty period. Aer that, Nominal cost
of the product & Actual shipping cost will be charged.
Do not send the unit to us without rst geng a response and geng the approval to send back the
item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our
Best to help you out. For any other assistance you can reach us via email.
For any other assistance you can reach us via email.