PROAIM Quad Bazooka User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Quad Bazooka Doorway Dolly (P-QUAD-SB)
Assembly Manua l
Steering Push/Pull
Bar
Dolly
Side Boards
Seat Rod
Chair
Z-Bracket
Pneumac Wheels
100mm Bowl
Camera Riser
Telescopic Bazooka
Euro
Adapter
4 x Track Wheels

2
 Posion single Steering Push/Pull Bar centrally
on the steering rod mount located on rear
axle of dolly. Connect them properly by
locking with provided knob.
 Posion dual Steering Push/Pull Bar on the
steering rod mount located on rear axle of
dolly. Connect them properly by locking with
provided knob.
Doorway Dolly Setup
NOTE: You can use both the Steering Bars
together for heavier set ups.
 Insert both the Side Boards into 2 connecon
rods found on each side of Main Dolly
Plaorm and secure them properly.
NOTE: While controlling lightweight setups,
you can only use single Steering Bar.
 Take out the allen bolts from dolly base to
aach Euro Adapter.
 Place the Euro Adapter by carefully aligning
the holes on dolly. Then ghten the allen
bolts back to secure it properly on the base.

3
 To mount the Chair, you need to connect
Z-Bracket onto dolly base. Insert Seat Rod
into Z-Bracket and lock it securely with
locking knob. Now aach Chair with Z-Bracket
and ghten the provided knob to x it
accurately.
NOTE: Chair is adjustable and moves in
forward/backward posion, to provide more
comfort to the operator.
Z-Bracket
Knob
 Mount Telescopic Bazooka along with
100mm Bowl Camera Riser on Euro Adapter
and Tighten it with integrated Quick Lock
Lever.
 Loosen the nut on Pneumac wheel with
help of provided tool and detach the wheel.
 On the provided bushes of wheel rod, aach
Track Wheels. Re-ghten the nut. Take the
help of provided tool, to secure wheels
properly.
NOTE: If you wish to use Quad Dolly with
Track Wheels, you need to remove all 4
Pneumac wheels.

4
YOUR PROAIM QUAD BAZOOKA DOORWAY DOLLY
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.