PROAIM SL-WG User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Wigo Portable Camera Slider (SL-WG)
Assembly Manua l
Wigo Slider
Storage Pouch
Available Sizes: 9",12",15"

2
 Aach your camera to the uid head and
ghten the knob to secure it properly.
NOTE: You will see the marks on the width side
of the slider. We recommend keeping the
marks facing towards you for more eortless
operaon.
NOTE: You can adjust the fricon to the
posive and negave sides.
Camera Slider Setup
 Mount the Wigo slider onto the tripod and
rotate it ll it's ght. Aach your uid head
(Not-Included) onto the camera plaorm.
Again, turn it ll it's ght.
 The other side of the slider has a knob
underneath to lock and unlock the slider.
CAUTION: We strongly suggest keeping your
slider locked when you are not using it.
 There is a fricon adjustment knob
underneath the slider; rotate it towards (+) to
increase the fricon and get a more smooth
speed without instant speed drops.
 The slider has rubber feet to place it on a at
surface.
Rubber Feet
SUGGESTION: You may face alignment
problems with some heads because of the
center of gravity problem. In that case, we
suggest using Z Desktop Stand head. In
addion, with Z-lt's exible design, you can
shoot extreme lt-ups and downs without
falling down the system front or back.
NOTE: You can lock the slider by rotang it
towards the lock icon and turn it to the other
side to unlock it.

3
YOUR PROAIM WIGO PORTABLE CAMERA SLIDER
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
NOTE: Do not put much pressure on the sides,
and do not over ghten the screws.
 Adjust the right amount of fricon and
operate the slider not by your hands but with
the whole body. This will have a much beer
steady speed on your slider. The camera
plaorm should not have any play in it. If you
feel it has a lile play, slightly loosen the four
screws on top of the camera plaorm, hold
the plate from the sides and re-ghten the
screws.