PROAIM P-VR User manual

Vario Camera Support Stabilizer Rig
(P-VR )
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permied by
the applicable copyright statutes or in wring by the Publisher.
I N S TR UC T I O N M A NUA L

Proaim Vario Camera Support Stabilizer Rig 2
INTRODUCTION
The Proaim Vario is a new and unique design made to save me, space and money. We oen
have customers that complain how various lmmaking gear takes so much me, space and
money- this encouraged us to start designing a product that solves this problem at a fracon of
the cost that goes into all the equipment. Proaim Vario is a 4 in 1 equipment that goes from a
hi-hat to a shoulder rig to monopod to a stabilizer within seconds.
IN THE BOX
Please inspect the contents of your shipped package to ensure you have received all that is
pictured and listed below.
COMPACT BAG PACKING
The Vario comes neatly packed in a foam
padded bag making it easier to carry and
protect (though it is unbreakable, but just
to be safer)!
1 x Handle set
Vario camera stabilizer rig
ASSEMBLING PROAIM VARIO CAMERA STABILIZER RIG
 Insert handles into the handle clamp and
twist it to ghten properly.

Proaim Vario Camera Support Stabilizer Rig 3
ADJUSTABLE HANDLES
The ergonomics of the design puts true value into these rigs. The handle move around easily and
swily allows you to adjust them according to your comfort.
 Press the side knob to remove the "L" Shaped Quick Release plate as shown below. Then
aach the camera with the "L" Shaped quick release plate.
"L" SHAPED QUICK RELEASE
The "L" shaped quick release is designed to
be compable with both DSLR cameras and
professional cameras.

Proaim Vario Camera Support Stabilizer Rig 4
 Now slide the quick release plate onto the top of camera head & ghten the knob to secure
it.
TELESCOPIC STRUCTURE
The telescopic structure is designed so that you
can switch from one shoong mode to another
with a simple ip of locks and without having to
take the camera o from the baseplate.
NOTE: Adjust the posion of camera with the
help of knob shown in image.

Proaim Vario Camera Support Stabilizer Rig 5
INSTANT HI-HAT
You don't always need a hi-hat, but when
you do, you need it! Hi-hats are great
for low angle shots and this equipment
comes is really handy when you need that
shot!
FREEDOM TO TAKE JIB SHOTS
The magic of Vario lies in its Swivel Head.
The swivel head allows you to easily take
some really nice sweeping shots from
boom to top or vice versa.
COMFORTABLE SHOULDER RIG
The Vario has a counterweight of 2.2lb on it
to capture stable and smooth footages for
long shoong hours. It has been designed to
give you easy access to all the funcons of
the camera which is not usually possible in a
tradional shoulder rig.

Proaim Vario Camera Support Stabilizer Rig 6
STABLE MONOPOD
It goes from being a shoulder rig to
amonopod within a second. Just ip the
locks open and you have yourself a mono-
pod. Yes! Without having to take the camera
o! Moreover, the tradional monopods are
top heavy making it a bit more dicult to
control, but with the counterweight on
Vario, the monopod becomes boom heavy
giving it a stabilized feel.
BALANCED STABILIZER
The weighted boom balances perfectly and
enables the rig to be used as a hand held
camera stabilizer to capture smooth moving
shots when needed.

Proaim Vario Camera Support Stabilizer Rig 7
WARRANTY
We oer a one year warranty for our products from the date of purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note
that we will not cover any shipping costs for returning the product to us. If any VAT or import du-
es are applied to the return, we will also charge these costs to the customer.
The warranty does not include, by the way of example, damage caused by products that we do-
not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product ,
or service by anyone other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or
occurring due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of the
replacement parts only) to the customers aer the Warranty Period has expired. We will cover
the complete cost of sending replacement parts within the warranty period. Aer that, Nominal
cost of the product & Actual shipping cost will be charged.
Do not send the unit to us without rst geng a response and geng the approval to send back
the item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our
best to help you out.
For any other assistance you can reach us via email.
YOUR PROAIM VARIO CAMERA SUPPORT STABILIZER RIG ALL DRESSED UP AND
GOOD TO GO