
English
© 2012 Proceq SA Table of Contents 1
Contents
1 Safety ................................... 2
General Instructions......................... 2
Use .................................... 2
Liability ................................... 2
Recommendations .......................... 2
2 Important information ...................... 3
Compatibility .............................. 3
Preventing damage ......................... 3
Correct measurement ....................... 3
3Measurements ............................ 4
Measuring process.......................... 4
The hardness value L ....................... 4
Measurement accuracy ...................... 4
Functional checks .......................... 5
4Technical data ............................ 5
Display device ............................. 5
Impact devices ............................ 6
5Connections and controls .................. 7
Display device ............................. 7
Impact device.............................. 7
6Device operation .......................... 8
Electronic display device ..................... 8
Connections ............................... 8
Main necessary settings ..................... 9
Other settings............................. 10
7Data output .............................. 15
Transferring the memory .................... 16
Clear memory ............................ 17
Online data transfer to the printer ............. 18
Online data upload to the PC ................ 19
8Operation ............................... 20
General ................................. 20
Information on the LCD display ............... 21
Depiction and interpretation of the measurements 22
9 Measurement limits ....................... 22
General ................................. 22
10 Error messages .......................... 23
General ................................. 23
Do not test too quickly! ..................... 24
Measurement signal error ................... 24
11 Maintenance ............................. 25
General ................................. 25
12 Accessories ............................. 26
PAROLINK3 data upload software ............ 26
Barcode reader ........................... 28
Test block U .............................. 30
Printer .................................. 30
13 Other important information................ 31
Viewing the data in the memory .............. 31
14 Form of supply and part designation ........ 32