Prochem Micro-Mist M500 Guide

Page 1 of 25
Micro-Mist Manual 07/20
Micro-Mist
SURFACE DISINFECTING SYSTEM
SAFETY, OPERATION & MAINTENANCE
INSTRUCTIONS
MODELS: MICRO-MIST M500
• CAUTION – READ THE INSTRUCTION MANUAL BEFORE USING THE APPLIANCE
• ORIGINAL INSTRUCTIONS
• MANUAL ALSO AVAILABLE ON LINE AT WWW.PROCHEM.CO.UK

Page 2 of 25
Micro-Mist Manual 07/20
MACHINE DATA
MODEL NO.
SERIAL NO.
DATE OF PURCHASE
DISTRIBUTOR NAME
DISTRIBUTOR TEL NO.
MANUFACTURER CONTACT Prochem Europe Ltd.
Oakcroft Road,
Chessington,
Surrey KT9 1RH, UK
Telephone: + 44 (0)20 8974 1515
Fax: + 44 (0)20 8974 1511
Email: [e-mail]
Website: www.prochem.co.uk
All information and specifications in this manual are current at the date of issue. However, because of
Prochem Europe policy of continual product improvement, we reserve the right to make changes at any
time without notice. Please note that this manual applies to all models and explains variations including
accessories used. Therefore, you may find some explanations for variations and options not installed
on your equipment.

Page 3 of 25
Micro-Mist Manual 07/20
CONTENTS
PAGE NO.
WARRANTY
5
WARNING SECTION
6
IMPORTANT SAFETY INSTRUCTIONS
7
GENERAL DESCRIPTION OF APPLIANCE
& IMPORTANT OPERATING INSTRUCTIONS
8
GENERAL OPERATING INSTRUCTIONS
9
UNDERSTANDING YOUR MICRO-MIST UNIT
10
CHEMICALS
12
OPERATING INSTRUCTIONS
13
GENERAL MAINTENANCE
14
TROUBLESHOOTING SECTION
16
MACHINE PARTS DIAGRAM & PARTS LIST
20
MISTING GUN PARTS LIST
23
WIRING DIAGRAM
24
CE DECLARATION OF CONFORMITY
25

Page 4 of 25
Micro-Mist Manual 07/20
This product is marked according to the European Directive (2002/96/EC) on
Waste Electrical and Electronic Equipment (WEEE).
The symbol on this product indicates that this product must not be disposed of
with normal household waste. Please protect human health and the
environment by disposing of this product responsibly in the correct manner.
For further information regarding the disposal, treatment, recycling and
recovery of this product, please contact:
Prochem Europe Sales Department
Telephone: [phone]
Prochem Europe Ltd. EEE Producer Registration Number: WEE / AJ0044SY
European Directive (2011/65/EU) Restriction of use of certain Hazardous
Substances in Electrical and Electronic Equipment (RoHS2).
This equipment does not contain more than the maximum permitted levels by
weight of the following substances:
Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr (Vl)),
Polybrominated Biphenyls (PBB), Polybrominated Diphenyl Ethers (PBDE)

Page 5 of 25
Micro-Mist Manual 07/20
MACHINE WARRANTY
DATE EFFECTIVE: 1/7/15
As of the above date, this warranty supersedes all previous warranties and forms part of the contract of sale.
Prochem Europe Ltd. (hereafter referred to as “Prochem”) guarantees this machine to be free from defects in materials and
workmanship for the relevant time period as shown below, and from the actual date of purchase by the user. Proof of the purchase
date from a Prochem Authorised Distributor will be required for performance of this warranty.
Rotationally moulded polyethylene tanks ……………………………………………………………………………………2 Years
All other parts except maintenance items (see below) …………………………….……………………………………………..1 Year
THIS WARRANTY EXCLUDES NORMAL MAINTENANCE ITEMS, including but not limited to HOSES, FILTERS, O-RINGS,
DIAPHRAGMS, VALVES, DRIVE BELTS, GASKETS, CARBON BRUSHES and damage to motors and other components as a
result of failure to replace normal maintenance items. THIS LIST IS NOT EXHAUSTIVE.
To obtain performance of this warranty, contact the Prochem Authorised Distributor who supplied the product.
The Prochem Authorised Distributor is responsible as the selling agent for the provision of initial training in the correct
use and application of the machine and approved chemicals. The distributor is also responsible for service maintenance
and repairs during and after the warranty period and the administration of any warranty claims in conjunction with the
Prochem Service Department. Failure of any of these provisions and responsibilities may invalidate the warranty and
the authorised status of the distributor.
If Prochem receives notice of any defects during the warranty period, Prochem reserves the right to either repair, or replace
components that prove to be defective. Goods must be returned before the warranty is approved. Goods sent out prior to the
return of faulty items will be invoiced at current prices, subject to standard payment terms (see Prochem Standard Terms and
Conditions of Sale). Replacement parts supplied under warranty will be guaranteed for the remainder of the original machine
warranty and NOT from the date of installation. Spare parts supplied after expiry of machine warranty may be covered by a
manufacturer’s warranty, subject to inspection by Prochem Europe Ltd. and at its sole discretion. Normal maintenance items,
however, are not covered. Replacement or credit of any returned parts will be at the discretion of the Prochem Service
Department. Any subsequent refusal to accept their decision will serve to invalidate this warranty with immediate effect.
PROCHEM AUTHORISED DISTRIBUTORS are responsible for machine and accessories service back up during and after the
warranty period. Prochem will furnish parts if the warranty is approved, but DISTRIBUTORS will be responsible for fitting, service,
labour and related charges including travel, if applicable, and the cost of returning the machine or parts to Prochem. If any
chargeable work is undertaken by Prochem for DISTRIBUTORS the labour, parts (if applicable) and return carriage will be
charged at FULL LIST PRICE. If warranty is approved due to genuine manufacturing defect, then labour charges and carriage
charges may be waived at Prochem’s discretion.
Prochem may send replacement parts to customers supplied by a DISTRIBUTOR or directly by Prochem, subject to the same
conditions of replacement and payment above. The customer, however, will be responsible for fitting, labour and the carriage
costs of returning repaired parts. Alternatively, Prochem will undertake warranty work at Chessington, subject to the same
conditions, but the customer will be responsible for all carriage charges.
Any of the following circumstances involving the machine will serve to invalidate this warranty:-
NORMAL WEAR, ACCIDENTS, USE OF THE MACHINE FOR A PURPOSE OTHER THAN THAT FOR WHICH IT WAS
INTENDED, INCORRECT MAINTENANCE, THE USE OF CHEMICALS OTHER THAN THOSE SUPPLIED OR APPROVED BY
PROCHEM, INCORRECT INSUFFICIENT OR NON-USE OF DEFOAMER, EXPOSURE TO EXTREME TEMPERATURES OR
CONDITIONS, INCORRECT INSTALLATION OR REPAIR & UNAUTHORISED INTERVENTION.
Your Prochem unit is designed to give you many years of reliable service. If a problem should arise during or after the warranty
period, contact the Prochem Authorised Distributor or the Prochem Service Department, for details of the services available. Only
the original purchaser of the new equipment may seek performance of this warranty – these rights cannot be transferred to a
third party.
Prochem Europe Ltd.
Oakcroft Road, Chessington, Surrey KT9 1RH, ENGLAND
Telephone: + 44 (0)20 8974 1515 Fax: + 44 (0)20 8974 1511 Machine Warranty Issue 10 1/7/15
Liability is excluded for the following:-
All forms of damage and special damage founded in tort (apart from death and personal injury) and contract law including
but not limited to consequential loss, loss of income and losses incurred in reliance of the contract; service, labour or third
party charges and the cost of returning the machine or defective parts to Prochem or Prochem’s Authorised Distributor.
As against a person dealing as a consumer, this warranty creates specific rights in addition to any statutory rights, which
are unaffected. As against a person dealing otherwise than as a consumer, however, this warranty excludes any implied
term that the machine will correspond with a description or a product sample.
With the exception of some specific products which are labelled and intended to be used by a consumer, all equipment,
machinery, accessories, products, services and advice supplied by Prochem is intended for professional and industrial use
only.