ProClip 539893 User manual

Item No. 539893 - Charging Cradle with Key Lock
and USB for Expansion Back
Compatible with:
Zebra ET50 8.3 | Zebra ET55 8.3
For Device with Rugged Frame and Expansion Back
Important:
Self-installation instructions and advice are provided for your
convenience. It is your responsibility to determine if you have the
knowledge, skills, and physical ability required to properly perform an
installation. ProClip USA, Inc. shall have no liability for damage or
injury resulting from the installation or use of any ProClip or third
party products. It is your responsibility to ensure that all products are
installed in adherence with local laws and regulations and in such a
manner as to allow a vehicle to be operated safely and without
distraction. ProClip USA, Inc. product warranties do not cover the
installation, removal or re-installation of any product.
Attention: Carefully read all instructions and review the images before installing this product.
1. Attach the cradle to the mounting position using the applicable bolts
enclosed. Cradle can be attached to any mount that uses the AMPS or VESA
75 hole patterns. The enclosed cable clamp can be attached to the strain-relief
tab with two enclosed screws to keep the power cord in place and prevent
damage from stress.
3. To remove the tablet from the cradle: Open the lock using enclosed key and
slide the block up. Press upwards on the upper part of the cradle, in the same
time pull the upper part of the device out from the cradle and then lift the device
up and out from the cradle.
2. To place the device in the cradle: Place the lower part of the device in the cradle,
then flip/press the upper part forwards so it snaps into place in the cradle. Secure the
lock with one of the enclosed keys.
4. The cradle and tablet are in place.

WARRANTY, RETURNS AND REGULATORY INFORMATION
Company Info:
ProClip USA, Inc. provides In-Vehicle Device Mounting solutions and
accessories. The ProClip products are custom fit virtually every model and
handheld device available such as cell phones, smartphones, tablets, MP3
players, navigation systems, satellite radios, two-way radios and mobile
computing. These innovative, convenient, secure and easy-to-install mounting
solutions provide a safer and more enjoyable driving experience.!
© 2017 ProClip USA, Inc. All rights reserved
CONTACT INFORMATION
Returns
No products shipped here under may be returned without ProClip’s prior
approval. In order to return a product, buyer must obtain an RMA# (Return
Merchandise Authorization Number). All returns must be made within thirty (30)
days of the invoice date and include proof of purchase. The product must be in
undamaged and unused condition, meaning: NO screw can be screwed into
any product, not even into the pre-drilled holes, NO holes punched through a
product, NO scratches or screw marks, and NO Velcro tape etc. We reserve the
right to withhold a refund if we deem the product is damaged. A copy of your
original order or invoice must accompany a return. ALL COMPONENTS
PERTAINING TO THE ORIGINAL PART MUST BE RETURNED.!
Limited Warranty and Liabilities
ProClip warrants that the Products will be free of defects in materials and
workmanship for a period of one (1) year from the date of purchase. If any
Product should become defective within the warranty period, ProClip, at its
option, will replace it, repair it or refund the purchase price. Repair or
replacement parts or Products will be furnished on an exchange basis and will
either be new or reconditioned. All replaced Products shall become the
property of ProClip. Warranty service is available to you by delivering the
Product during the warranty period to the company it was purchased from or to
ProClip at 4915 Voges Rd., Madison, WI 53718 USA and providing proof of
purchase, price and date. If shipped to ProClip, the buyer must first call ProClip
at [phone] or e-mail ProClip at [e-mail] to obtain a
return approval and return number. You will bear all shipping, packaging and
insurance costs and all other costs, excluding labor and parts, necessary to
effectuate repair, replacement or refund under this warranty. For more
information on how to obtain warranty service, write, e-mail or telephone
ProClip at 4915 Voges Rd., Madison, WI 53718 USA.#
Tel: [phone], e-mail: [e-mail].!
THIS LIMITED WARRANTY DOES NOT EXTEND TO ANY PRODUCT WHICH
HAS BEEN DAMAGED AS A RESULT OF ACCIDENT, MISUSE, ABUSE OR AS
A RESULT OF UNAUTHORIZED SERVICE. THIS WARRANTY IS IN LIEU OF
ALL OTHER EXPRESS WARRANTIES FOR THIS PRODUCT. IMPLIED
WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NON-INFRINGEMENT SHALL HAVE NO
GREATER DURATION THAN 1 YEAR FROM THE DATE OF PURCHASE. IN THE
EVENT THIS PRODUCT BECOMES DEFECTIVE DURING THE WARRANTY
PERIOD, THE PURCHASER’S EXCLUSIVE REMEDY SHALL BE REPAIR,
REPLACEMENT OR REFUND AS PROVIDED ABOVE. IN NO EVENT SHALL
PROCLIP BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES,
INCLUDING WITHOUT LIMITATION LOSS OF PROPERTY, ARISING FROM
BREACH OF ANY EXPRESSED OR IMPLIED WARRANTY.
PROCLIP DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OTHER
THAN THOSE SET FORTH ABOVE.
IN NO EVENT WILL PROCLIP BE LIABLE TO YOU OR ANY THIRD PARTY FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT
LIMITATION, INDIRECT, SPECIAL, PUNITIVE, OR EXEMPLARY DAMAGES,
INCLUDING ATTORNEY FEES ARISING OUT OF THE USE OF OR THE
INABILITY TO USE THE PRODUCTS, OR FOR ANY CLAIM BY ANY OTHER
PARTY, EVEN IF PROCLIP HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.!
4915 Voges Rd.#
Madison, WI 53718#
USA#
Phone: [phone] !
US Toll Free: 800-296-3212!
Email: [e-mail]!
Web: www.proclipusa.com
Regulatory Information
All ProClip devices are designed to be compliant with rules and regulations in
locations they are sold and will be labeled as required. Any changes or
modifications to ProClip equipment, not expressly approved by ProClip USA, Inc.
could void the user’s authority to operate the equipment. !
Power Supply !
Use only the ProClip supplied power supply. Use of alternative power supply will
invalidate any approval given to this device and may be dangerous. !
Radio Frequency Interference Requirements- FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation. !
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the manufacturer’s
instructions, may cause interference harmful to radio communications. !
There is no guarantee, however, that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment offand
on, the user is encouraged to try to correct the interference by one or more of the
following measures: !
1- Reorient or relocate the receiving antenna.#
2- Increase the separation between the equipment and receiver. !
3- Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.#
4- Consult the dealer or an experienced radio or TV technician for help. !
Radio Frequency Interference Requirements – Canada
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de la classe B est conforme à la norme NMB-003 du Canada. !
European Union EU and EFTA CE Marking
Statement of Compliance - ProClip USA, Inc. hereby declares that this device is in
compliance with all the applicable Directives, 2014/30/EU, 2014/35/EU and
2011/65/EU. A Declaration of Conformity may be obtained upon request.
Please contact us for more information on this product and its regulatory
compliance.