Procom GEM DC Series User manual

GEM DC Series-Single Phase Panel Meter
®
PR C MO O
Installation Guide
Rev.-01
GEM-DC-V

1. Introduction :
GEM-DC series meters are single phase panel meter with Measurement
of Accuracy class 1.0 (FS), High glow display for distant viewing,
Programmable site selectable Scaling of Current.
2. Model Selection Chart :
3. Technical Specification :
Measurements*
Current
Shunt (DCI) : 75 mV full scale
Scale (I) : 0-999 A
Voltage
Voltage : 2 - 50 VDC,
6 - 150 VDC,
12 - 300 VDC,
Voltage Withstand : 2 Times Rated Voltage
Resolution : 4 digit display with auto decimal scrolling
& Polarity sign in GEM-DC-I
Accuracy : Class 1
Auxiliary Supply : 35V - 300V (AC/DC)
0
Temperature : -10 to 70 C
0
Storage : -20 to 75 C
Humidity (non-condensing) Upto 85%RH
Mounting : Panel Mount
Display : 4 digit Single Row
GEM-DC-V
GEM-DC-I
DC Voltage DC Current
Installation Guide
Page-1

4. Setting Range
I FS Range : 1 - 999 A for GEM-DC-I
5. Terminal Connection :
5.1 Connection : GEM - DC-V
4
23
v-
v+
V-
V+
5.2 Connection : GEM - DC- I
**
6. Setting Procedure :
Enter the parameter mode by pressing button for 3 sec
Display will show 1f5
Press button display will show default 1fsvalue 0001
Value can be increased by pressing button
Press Button to exit parameter mode
SHUNT
34
I- I+
Installation Guide
Page-2

100
100
37.5
49.5
27.5
90
Front View Side View
Top View Panel Cutout
92
92
All dimensions are in mm.