ADInstruments AD2Q01F User manual

Instrument Manual ADInstruments
Quad-wavelength laser source
AD2Q01F

AD Instruments
_____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 2
CONTENTS
PAGE
1
2
Introduction
W
arranty
2.1Thre
e Years Limited Warranty
2.2
Exclusions
2.3
Returning Product
2.4
Contact us
Sa
fety Information
Preparin
g for Operation
4.1
Unpacking the instrument
4.2
Power Supply
Opera
tion
5.1
Display and controls
5.2
Turning the instrument on and off
5.3
Switching the wavelengths
5.4
Frequency Output
5.5
Auto-wavelength Recognition
5.6
Switching backlighting of the LCD on and
off
5.7
Connecting with Optical Power Meter
Speci
fications
Main
tenance
Trouble shooting
.................... 3
.................... 4
3
4
....................6
....................7
5
....................9
6
7
8
....................19
....................21
....................22

AD Instruments
_____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 3
I Introduction
Th
e AD2Q0IF quad-wavelength laser source o
ffers
excellen
t stability, portability and facile adjustment
s for
accurat
e optical fiber testing. Two output connector
serves
four wavelengths 850nmII300nmII3I0nmII550nm.
AD2Q0IF can be used to test optical fiber of long
distanc
e and local network. Also it can work with
optical
power meter to measure the loss of optical fiber.
S / M
Features:
Easy-to-use, straight forward operation
Eye
-catching handheld package
LC
D backlight for easy operation in darker
environments
Rechargeabl
e battery inside
Three
-year warranty and recommended calibration
interval.

AD Instruments
_____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 4
2. Warranty
Three Years Limited Warranty
Abacanto Digital
products are warranted against the defective components and
workmanshi
p for a period of three years from the date of delivery to the original
custome
r. Any product found to be defective within the warranty period would be
returne
d to Abacanto Digital authorized service center for repair, replacement an
d
calibration
.
Exclusions
Th
e warranty on your equipment shall not apply to defects resulting from the
following:
Unauthorized repair or modification including battery replacement
Misuse, negligence, or accident
Returning Product
To
return product, you may contact Abacanto Digital to obtain additional
informatio
n if necessary. To serve you better, please specify the reasons fo
r the
return.
All delivery and mails should be sent to the following address:

AD Instruments
_____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 5
Contact Us
Tel:
Fax
:
E-mail:
Website:
[phone]
+34 91
661 49 17
[email protected]
www.abacantodigital.com

AD Instruments
_____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 6
3 Safety Information
Warnings!
Never look directly into optical outputs or a fiber while the equipment is on
.
Invisible laser beam may damage your eyes.
Do not short-circuit the terminal of AC adapter I charger and the batteries.
Excessive electrical current may cause personal injury due to
fumes,electric
shock or equipment damage.
Connect DC power cord with the equipment and wall socket properly. Whil
e
inserting the DC plug, make sure there is no dust or dirt on the terminals an
d
both plugs are fully seated. Incomplete engagement may cause fuming,
electric shock or equipment damage and may result in personal injury.
Do not operate the equipment near hot objects, in hot environments, in
dustyI
humid atmosphere or when condensation is present on the equipment. Thi
s
may result in electric shock , product malfunction or poor performance.

AD Instruments
_____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 7
4 Preparing for Operation
4. 1 Unpacking the
instrument
Packing material
W
e suggest that you keep the original packing material. Using the original
packing
material is your guarantee of protecting the instrument during transit.
Checking the package contents
The standard accessories of AD2QOIF are as follows:
Main unit(including battery)
Qualit
y Check Report
DC 6V Adapter
Carrying Case
User’s Guide
Checking for damage in transit
Afte
r unpacking the instrument, check to see whether it was damaged in
transit.
Thi
s is particularly likely if the outer casing is clearly damaged. If there is
damage,
do
not attempt to operate the instrument or to repair it without authorization.
Doing
so
can cause further damage and you may lose your warranty qualification.

AD Instruments
_____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 8
4.2 Power Supply
There are battery indicator and power plug on the screen to show the power supply.
Whe
n you use the DC 6v charger, there is no battery indicator on the screen.
When
yo
u do not connect the DC 6v charger, the adapter indicator will disappear on th
e
screen.
When you use the battery, the battery indicator on the screen will show the remaining
charge
. An empty battery indicator means the power is almost out. When the
battery
charg
e is extremely low to supply the necessary power, the instrument will
automaticall
y switch off after several beeps of the buzzer. Please change the
battery
or recharge it
l BBB
nm
l BBB
nm
l BBB
nm
l BBB
nm

AD Instruments
_____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 9
AD
__________________
5 Operation
5. 1 Display and
controls
>2
s
PER M
O N
TW I N
O F F
S / M
C W / H
z
5. 1 . 1 Front(Panel
Board)
LAS E
R
SOU RCE
activate the instrument without Auto-off function.
and continuous wavelength.
850nm,l300nm,l3l0nm and l550nm.
TWIN: Auto-wavelength recognition is on.
No.
Key
Function
l
>2 s PE R M
ON
OFF
Switche
s Instrument on/off. Long keypress while powering on to
2
S / M
Switc
h between Single Mode and Multimode
3
C W/ H z
Modulate
d Wavelength Shifting Key: Switches modulated
wavelength
4
W
avelength Shifting Key: Switches working wavelength between
5
TWI N
SINGLE
: Auto-wavelength recognition is off.
6
Switche
s backlighting on/off.

AD Instruments
_____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 10
5. 1 .2 Back &
top
Connector 2
Connector I(FC/PC,SC/PC,ST/PC)
Battary Plate
(including 2 units of AA recharging batteries)
DC 6v power input
Charging Signal light(Red light blinking means
charging,Green light means charging finish).
Standard Accessories:
FC/PC
, SC/PC, ST/PC interchangeable connector, Manual, Carrying
Bag,
and Battery, Worldwide compatible AC/DC adapter, Test Report

AD Instruments
_____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 11
5. 1 .3
LCD
Wavelength
DC
Adapte
r
Battery Charge
l 888 nm
Modulation
Powe
r
Measuremen
t Unit(dBm)
Auto
-wavelength
Recognition
Auto-off
8 . 8 . 8 . 8
270H z
1kH z
2kH z
SING LE
TWIN
AUTO-OFF

AD Instruments
_____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 12
5.2 Turning the instrument on and off
1 3 1 0
nm
-
5 . 0
AUTO-OFF
Press the ON/OFF” key briefly.
Th
e instrument powers on.(See the
figure)
Pres
s the ON/OFF” key briefly again.
The instrument powers off.
SING LE
Note: Auto-off function
I Th
e instrument powers off automatically if no key press in I0 minutes.
2 Pres
s the ON/OFF”key for about 2 seconds to power on the instrument
with
“Auto-off“function deactivated.
>2s PERM
ON
OF F

AD Instruments
_____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 13
5.3 Switching the wavelengths
5.3. 1 Switching the
wavelength
s
in the in the “Singlemode“
Press the
then Press
to “ Mulitimode “ ,
Key to switch the
S / M
wavelength between l3lOnm,
l55Onm and 0ff.
0
ff 155 0
131 0 nm
-
5 .
0
SINGLE
AUTO-OFF

AD Instruments
_____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 14
5.3.2 Switching the wavelengths
in the in the “Multimode“
Press the
then Press
to “ Mulitimode “ ,
Key to switch the
S / M
wavelength between 850nm,
l300nm and 0ff.
0
ff 1300
850 nm
-
5 .
0
SINGLE
AUTO-OFF

AD Instruments
_____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 15
5.4 Frequency Output
-
5 . 0
270Hz
1kHz
The instrument defaults to CW when it
switc
h on. When it is set to CW,
there is
no
frequency on display.
Pres
s the “CW/Hz“ Key to select th
e
output among 270Hz, 1kHz and 2kHz.
1.“CW“ is not displayed on the LCD
CW /Hz
1 3 1 0 nm
1
2kH
z CW
SINGLE
AUTO-OFF

AD Instruments
_____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 16
5.5 Auto-wavelength Recognition
Press the “TWIN“ Key to tun on and off the auto-wavelength recognition function.
TWIN

AD Instruments
_____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 17
©Copyright Abacanto Digital SA
de usuario AD2Q01F
17
5.6 Switching backlighting of the LCD on and off
Press the backlighting Key to switch the backlighting of the LCD on and off.
1 3 1 0 nm 1 3 1 0 nm
-
5 . 0
-
5 .
0
SINGL E SINGLE
AUTO-O F F AUTO-O F F

AD Instruments
_____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 18
5.7 Connecting with Optical Power Meter
It can work with optical power meter to measure the loss of optical fiber accurately.
S I M

AD Instruments
_____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 19
6 Specifications
Optical Specifications
Model
FHS2Q O I F
Output wavelength (nm)
850/1300/1310/155
0
Laser
Clas
s
Spectral Width
3n
m typical value
Stability (15 min preheat @ 25 )
±
0.05dB/15min ±0.1dB/5hr
C
W output power
-
5.0dBm±1dB
Mo
dulated Wavelength
270Hz,1kHz,2kH
z
A
vailable Connector
FC/PC,SC/PC,ST/P
C Interchangeable
connectors
Powe
r
2
units of AA recharging battaries
A
C Adapter
2Input
: AC 100-240V 50/60HZ Output:DC 6V/1
A

AD Instruments _____________________________________________________________________
©Copyright Abacanto Digital SA. Manual de usuario AD2Q01F 20
General Specifications
Operation Temperature
-10 C~+50 C
Storage Temperature
-20 C~+70 C
Humidity
<90%
Size(HXWXD)
160mm x 76mm x 45mm
Weight
0.27 kg(including batteries)