Progres Agronic 5500 User manual

SUPPLIED MATERIAL
MOUNTING BUID IN FORMAT
Installation option link AgroBee-L
Agrónic 5500
Disconnect power to the
controller.
1
• Agrobee-L coordinator circuit with hose,
antenna connector and two washers
• Antenna
• Antenna cable 10 m
• 2 nylon screws
• M6 isolator (build in model)
• M8 washer (build in model)
Remove the 6 screws that
hold the keyboard.
2
Break the die-cut indicated in
the image with a small blow
with a screwdriver or similar.
6
Li the keyboard and
disconnect the 2 wires that
connect the keyboard circuit
with the outputs circuit.
3
Screw the circuit with the two
nylon screws.
5
Coordinator circuit
Nylon screws
Isolator M6
Antenna
Antenna cable
M8 washer
Antenna connector
Hose
Plastic washers
(glued on the circuit)
4Place the coordinator circuit
at the designated point
behind the keyboard.

To fit the antenna connector,
place the M8 washer inside the
box and the M6 isolator outside,
then fit the nut.
To assemble the box format, follow the same steps as the buid in format, changing points 6 and 7 for:
7Reconnect the cables
disconnected in point 3.
Place the antenna connector
in the hole made, and fasten
it with a glower washer and
nut.
8
7
Close the equipment by fitting
the screws, and connect the
antenna cable and the antenna.
9
Power the controller and
realize the corresponding
configuration using the manual
provided “Agrobee-L User
Manual - Configuration and
consultation for Agrónic 2500
and Agrónic 5500”.
The installation of the Agrobee-L
coordinator circuit has already
been completed.
Don’t power the controller without
first connecting the antenna, as
the coordinator may be damaged.
11 12
Place the antenna at a high
point to achieve correct
coverage.
10
R-2314
Polígon Industrial, C/ de la Coma, 2 | 25243 El Palau d’Anglesola | Lleida | España
Tel. [phone] | [email protected] | www.progres.es
Sistemes Electrònics Progrés, S.A.
MOUNTING BOX FORMAT
IMPORTANT
Drill a hole on the right side
as indicated in the image.
6
58 mm
Diameter
6,5 mm
34 mm
INSIDE OUTSIDE
INSIDE OUTSIDE