PROGRESSIVE DESK ST-01 User manual

Scan for more information
ST-01
User Manual
V 1.4

Specifications ..................................................................................3
Parts List .........................................................................................4
Assembly & Installation ...................................................................5
Adjustability .....................................................................................8
P a g e | 2
Table of Contents
Have any queries? Our expert engineers are here to help!
[email protected] progressivedesk.com
1-800-828-9414

Specifications
P a g e | 3
Headrest Removable Yes
2.4"
Included
3 Positions
Included
90° - 130°
Adjustable
17.3" - 21.3"
19.5"
20.5"
23.8" - 27.8"
28.7 lbs.
330 lbs.
25.2" × 17.7" × 43.3" - 47.2"
Nylon
Plastic
3 Years
BIFMA
Coat Hanger Hook
Headrest Height Range
Headrest Tilt Adjust
Backrest Locking
Backrest Tension Control
Recline Angle
Lumbar Height
Seat Height Range
Seat Width
Seat Depth
Armrest Height Range
Product Weight
Max Weight Capacity
Chair Dimensions
Caster Material
Base Material
Warranty
Certifications
Additional Features

A (x1)
B (x1)
C (x1)
Back
Seat
Armrests
D (x1)
E (x1)
F (x1)
Tilt Mechanism
Headrest
Coat Hanger
G (x1)
H (x1)
I (x5)
Gas Lift Cylinder
Base
Casters
J (x6)
K (x3) L (x4) M (x2) N(x1) O(x1)
M6x35
Screws
M8x18
Screws
M6x30
Screws
Preinstalled
Screws
5mm Hex
Key
Hex Key
Screwdriver
P a g e | 4
Parts List

Text Here
Step 1: Assemble the Base
G (x1)
H (x1)
I (x5)
Gas Lift
Cylinder
Base
Casters
Step 1A: Remove the packaging cap from the Cylinder (G).
Step 1B: Firmly insert the 5x Casters (I) into the bottom of the Base (H), then insert the Gas Lift Cylinder (G) into
the top of the Base (H) with the rod side up.
Step 2: Attach the Armrests to the Seat
B (x1)
C (x1)
J (x6)
N(x1)
Seat Armrests
M6x35
Screws
5mm Hex
Key
Align the Armrests (C) to the Seat (B) at the desired width. Screw in the Armrests using 6x M6x35 Screws (J).
Tighten with the Hex Key (N).
Assembly & Installation
P a g e | 5
N

Step 3: Attach the Tilt Mechanism to the Back
A (x1)
D (x1)
K (x3)
N(x1)
Back
Tilt
Mechanism
M8x18
Screws
5mm Hex
Key
Attach the Tilt Mechanism (D) to the Back (A) using 3x M8x18 Screws (K). Tighten with the 5mm Hex Key (N).
Step 4: Attach the Tilt Mechanism to the Seat
L (x4) N(x1)
M6x30
Screws
5mm Hex
Key
Attach the Tilt Mechanism (D) to the Seat (B) using 4x M6x30 Screws (L).Tighten withthe 5mm Hex Key (N).
P a g e | 6
N
N
L
L

Step 5: Attach the Tilt Mechanism to the Gas Lift Cylinder
Line up the hole on the Tilt Mechanism to the Gas Lift Cylinder and attach the two parts together. Ensure that it is
properly attached by applying weight on the Seat.
Step 6: Attach the Headrest and Coat Hanger
E (x1)
F (x1)
M (x2)
O(x1)
Headrest
Coat Hanger
Preinstalled
Screws
Hex Key
Screwdriver
Step 6A: Unscrew the Preinstalled Screws (M) from the Headrest (E).
Step 6B: Attach the Headrest (E) and Coat Hanger (F) to the top of the Backrest using the 2x Preinstalled Screws
(M). Tighten with the Hex Key Screwdriver (O).
P a g e | 7
O

Adjustability
Seat Height
Raise the seat height by pulling up on the lever with no weight applied on the seat. Lower the
seat height by sitting in the chair and pulling up on the lever.
Headrest
Adjust the headrest height and tilt angle to the desired position by applying pressure up or
down.
Lumbar
Position the lumbar support for optimal support by adjusting it up or down.
P a g e | 8

Backrest Tension
Adjust the tension in the backrest by spinning the knob underneath the seat. Turn right to
increase tension and turn left to decrease tension.
P a g e | 9
Have any queries? Our expert engineers are here to help!
[email protected] progressivedesk.com
1-800-828-9414
Back Tilt Locking
Lock the back at 3 different positions by leaning to the desired location and pushing the lever
in. Unlock the backrest by pulling out the lever.