Sunnydaze Decor PENELOPE AJ-229 User manual

Page 1 / 4
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
[e-mail], or via our contact us page at www.SerenityHealth.com/contact-us/
Purchase Date: / / Order/Customer Reference Number:
12/2019JYF19107-set
Ensure all parts are accounted for
before disposing of packaging.
WARNING!
CHOKING HAZARD — This item contains small parts that can be swallowed.
Keep children away during assembly.
CAUTION
This egg chair stand is not designed for
use as a swing. Bouncing, swinging, or
any other signicant movements while
in the chair may cause serious injury.
This stand must be on a level, stable
surface. Make sure the safety strap is
attached correctly, and all hardware is
securely tightened before each use.
Weight Limit: 265 lbs.
PENELOPE HANGING EGG
CHAIR WITH STAND
AJ-229
Read all assembly and care instructions carefully before using this product.
Save these instructions for future reference.

  
A
Top Pole 1
B
Bottom Pole 1
CLeg 4
DBolt 4
EWasher 4
F
M8x55MM
2
1Egg Chair 1
2
Cushions 1
RPin 1
SExtension Spring 1
T
Safety Strap 1
  
XHex Key 1
ZSpanner 1

Page 2 / 412/2019
D
X
E
X
Z
F
JYF19107-set
Slide Leg (C) into Bottom Pole (B). Align the holes on
the underside of each piece. Hand-tighten Bolt (D) and
Washer (E). Repeat until all legs are attached. Tighten all
bolts using Hex Key (X).
Slide Top Pole (A) onto Bottom Pole (B) and align the holes.
Secure the poles by hand-tightening M8x55MM hardware
(F) through the top holes. Repeat with the bottom holes.
Fully tighten the hardware using Hex Key (X) and Spanner
(Z). Place the hex nut cap over the lock nut.
Unfold Egg Chair (1) so the seat is at and the frame bars
extend towards the back of the seat.
Step 3
ASSEMBLY
Assembly Tip: Ensure all parts align correctly before fully tightening hardware.
Step 1
Place Pin (R) into Top Pole (A). Insert Extension Spring
(S) through the bottom of Pin (R). Hang the chain that is
attached to the egg chair onto the extension spring.
Step 4
Step 2
R
S

Page 3 / 412/2019JYF19107-set
Place the seat cushion into the chair and tie the headrest
cushion to the chair frame. Do not tie the cushion to the ropes.
Step 6
Wrap the hook and loop fastener that is sewn onto Safety
Strap (T) around Pole (B). Loop the strap around the
metal frame of the egg chair and connect the buckles,
tighten the strap.
Step 5
T
B
USE & CARE
Under normal use, Sunnydaze hammock stands will last for years.
It is important to follow basic use & care tips to prolong the life of your stand.
• SAFE USE: Do not use this chair for swinging, bouncing, jumping, twisting, or other excessive movements;
doing so may cause serious injury, including, but not limited to, the stand tipping over.
• CHILDREN: Supervise children at all times. Do not allow children to play on or sleep in any hanging chair.
Chair not included.
• INSPECTION: Ensure the stand is assembled correctly and all hardware is securely tightened before each
use.
• CLEANING: Use a soft cloth, warm water and mild detergent to wipe down the stand if necessary. Dry the
stand after cleaning to prevent rust.
• SCRATCHES: The powder coating on the stand is tough and durable but, even under normal use, some
scratching is inevitable. To avoid excessive rust, wipe these areas as needed to remove moisture.
• STORAGE: Store the stand indoors when not in use. Cool, dry locations are recommended to prevent
damage and rust that may result from exposure to moisture.
NOTE: Only loop
the strap around
the frame of the
chair, as shown.

TROUBLESHOOTING
• If the stand feels unstable, make sure it is on a level surface and the feet are correctly and evenly distributed.
• If the stand is making noise when in use, check to make sure all hardware is fully tightened.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

Page 4 / 412/2019JYF19107-set

SAFETY STATEMENTS & WARNINGS
• Do not exceed the weight limit: 265 pounds
• This product is intended to be used by one person at a time.
• Sunnydaze Egg Chair with Stand is not a swing. Do not swing, bounce, jump,
twist, or spin in the chair.
• Use care when getting in and out of the chair. When in use, the chair should
remain inside the base area at all times. A diagram of the base area is shown
on the right.
• The chair must be used with the provided safety strap attached to the chair
and to the stand as shown in Step 5.
• Chair Stand must be used with all provided parts. Install all parts in accordance with the assembly instructions and inspect
the stand before use.
• Ensure all hardware is securely installed and tightened before each use.
• When securing the chair to the stand with the safety strap, only loop the strap around the frame of the chair, never the ropes.
• Always inspect the stand and hardware for damage before each use.
• Do not allow children to use this product without adult supervision.