PROGRESSIVE DESK PA-TW-3-M User manual

x1
A
19.8lbs
30.7"
22.0"
26.7"
16.5"
1.6" - 17.1"
Table size:
Max
30.7"
22.0"
Please do not exceed the maximum
load capacity.
19.8 lbs
1.5" - 18.1"
Maximum Load Capacity
Height Range
NO. Desk Converter
TOOLS
STEP 1
CAUTION
STEP 2
WARNING
Locked Unlocked
Place hands on either side of the desk converter and gently press the switch up with your left
hand to the "unlocked" position. Slowly pull upwards to raise the desk converter into position.
PA-TW-3-M
Place the desk converter properly
according to it's size to prevent injury
or damage.
Please do not place hands near the
supporting bars to avoid injury while
raising or lowering the desk converter.
Remove the desk converter from the
packaging and place it on the table.
Have any queries?
Our expert engineers are here to help!
Progressivedesk.com
[email protected]
1-800-828-9414

12
STEP 3
Hand switch
Button
Raising the desk converter
Press lightly on the desk converter on the left side, loosen the button and move it
backwards and tighten it. The desk converter will rise as the button moves.
Lower the desk converter
Press lightly on the left side and push the switch forward, while pressing the desk
converter down to lower it. After loosening the button with your right hand, move it to the
appropriate position to the left and tighten it. The button will snap into place, indicating
that the hand switch is automatically locked in the position.
How to move the desk converter safely
Lower the desk sweater
to the lowest position.
Lock the switch
The switch is
locked safely
Adjusting the height