PROGRESSIVE DESK ST-02 User manual

Scan for more information
ST-02
User Manual
V 1.2

Specifications ..................................................................................3
Parts List .........................................................................................4
Assembly & Installation ...................................................................5
Adjustability .....................................................................................8
P a g e | 2
Table of Contents
Have any queries? Our expert engineers are here to help!
[email protected] progressivedesk.com
1-800-828-9414

Specifications
P a g e | 3
Headrest Removable Yes
1.2"
3 Positions
Included
90° - 125°
Adjustable
18.9" - 22.8"
19.7"
18.1" -20.1"
2.76"
41.2 lbs.
330 lbs.
25.2" × 26.7" × 47.2" - 51.2"
Nylon
Plastic
5 Years
1 Year
BIFMA
Headrest Height Range
Backrest Locking
Backrest Tension Control
Recline Angle
Lumbar Height
Seat Height Range
Seat Width
Seat Depth Range
Armrest Height Range
Product Weight
Max Weight Capacity
Chair Dimensions
Caster Material
Base Material
Hardware Warranty
Cushion Warranty
Certifications

A (x1)
B (x1)
C (x1)
Back
Headrest
Seat
D (x1)
E (x1)
F (x1)
Armrests
Tilt Mechanism
Gas Lift Cylinder
G (x1)
H (x5)
I (x1)
Base
Casters
Screw Cover
J (x8)
K (x2)
L (x3)
M (x2)
M6x40 Screws
M6x45 Screws
M8x45 Screws
M6x20 Screws
N (x7)
O (x6)
P (x3)
Q (x1)
M8x17 Washers
M7x15 Washers
M8x13 Washers
5mm Hex Key
R (x1)
4mm Hex Key
P a g e | 4
Parts List

Text Here
Step 1: Assemble the Base
F (x1)
G (x1)
H (x5)
Gas Lift
Cylinder
Base
Casters
Firmly insert the 5x Casters (H) into the bottom of the Base (G), then insert the Gas Lift Cylinder (F) into the top of
the Base (G) with the rod side up.
Step 2: Attach the Armrests to the Seat
C (x1)
D (x1)
J (x6)
O (x6)
Q (x1)
Seat
Armrests
M6x40
Screws
M7x15
Washers
5mm Hex
Key
Align the Armrests (D) to the Seat (C) at the desired width. Screw in the Armrests using 6x M6x40 Screws (J) and
6x M7x15 Washers (O) as seen below. Tighten with the 5mm Hex Key (Q).
Assembly & Installation
P a g e | 5

Step 3: Attach the Tilt Mechanism to the Seat
E (x1)
J (x2)
K (x2)
N (x4)
Q (x1)
Tilt
Mechanism
M6x40
Screws
M6x45
Screws
M8x17
Washers
5mm Hex
Key
Attach the Tilt Mechanism (E) to the Seat (C) using 2x M6x45 Screws (K) towards the front of the Seat, 2x M6x40
Screws (J) towards the back of the Seat and 4x M8x17 Washers (N) as seen below. Tighten with the 5mm Hex Key
(Q).
Step 4: Attach the Back to the Tilt Mechanism
A (x1)
L (x3)
N (x3)
P (x1)
Q (x1)
Back
M8x45
Screws
M8x17
Washers
M8x13
Washers
5mm Hex
Key
Attach the Back (A) to the Tilt Mechanism (E) using 3x M8x45 Screws (L), 3x M8x17 Washers (N) and 3x M8x13
Washers (P) as seen below. Tighten with the 5mm Hex Key (Q).
P a g e | 6

Step 5: Attach the Tilt Mechanism to the Gas Lift Cylinder
Line up the hole on the Tilt Mechanism to the Gas Lift Cylinder and attach the two parts together. Ensure that it is
properly attached by applying weight on the Seat.
Step 6: Attach the Headrest to the Back
B (x1)
I (x1)
M (x2)
R (x1)
Headrest
Screw
Cover
M6x20
Screws
4mm Hex
Key
Attach the Headrest (B) using 2x M6x20 Screws (M) to the Back (A). Tighten with the 4mm Hex Key (R). Then,
attach the Screw Cover (I) on the Headrest.
P a g e | 7

Seat Height
Raise the seat height by pulling up on the lever. Lower the seat height by sitting in the chair
and pulling up on the lever,
Headrest
Adjust the headrest height and tilt angle to the desired position by applying pressure up or
down.
Lumbar
Position the lumbar support for optimal support by adjusting it up or down.
Adjustability
P a g e | 8
Back Tilt Locking
Lock the back at 3 different positions by leaning to the desired location and pushing the lever
in. Unlock the backrest by pulling out the lever.

Seat Depth
Adjust the depth of the seat by pulling up on the forward lever. Slide the seat forward by
pushing off from the backrest. Slide the seat backwards by pushing backwards on the seat.
Armrest Height
Adjust the armrest height up or down by pulling up on the lever on the outside of the armrest.
P a g e | 9
Backrest Tension
Adjust the tension in the backrest by spinning the knob underneath the seat. Turn right to
increase tension and turn left to decrease tension.